Navistar 4500 cutout with the Game Changer

This video shows the effectiveness of the tool along with what can happen with minor human error. We failed to properly secure the line behind the windshield in the lower left corner when wrapping the line around the windshield resulting in a breakage. Once we discovered our error and corrected it, the tool performed flawlessly with great success. Please visit rolladeck.net for more information and how to purchase.

[@someguy9471]

Compatible with a Milwaukee impact m12 drill or does it need to be a normal m12 drill? And how decent is it on pulling quarter glasses?

[@rolladeckwindshieldsetting7747]

It comes complete built onto the M12. Works great with quarters as well.

[@andrewgonzales3715]

You could just use the equalizer gun to cut this out and under two minutes

[@rolladeckwindshieldsetting7747]

Takes me about 3 to 5 minutes with both types of tools. Only difference is with a reciprocal saw tool like the one I believe you are referring to adds more prep time with cleaning and priming the chisel marks left in the metal and makes my arthritis in my hands flare up from the vibration.

[@Whutup549]

No way ur doing it in 2 minutes

[@maxmarx2]

Send me one lol this thing looks amazing

[@rolladeckwindshieldsetting7747]

Thank you Max! You can go to rolladeck.net to order.

[@jorgeRodriguezcolora]

👍

[@brianneeley6366]

How do you get the line started?

[@rolladeckwindshieldsetting7747]

On this particular model you can push the line through the bead from the outside in either bottom corner. I prefer the passenger or right side bottom corner. Pull at least 4 feet through so you have enough supply to wind onto the tool, then feed the line across bottom, up left apillar, across top and down right apillar then past the starting point to the passenger wiper post to wrap around and redirect to the anchor cup in the middle of the windshield. When starting from the inside, use a 3' segment of line and push a loop through the lower passenger side and slip the cutting line from the supply spool through the loop about 2 feet of line is sufficient. Then pull the loop segment back into the cab which will bring in approximately 4 feet of slack line to start. You will find detailed instructions and illustrations on how to setup and use our products @rolladeck.net

[@jacqueskabban863]

How much does it cost??

[@rolladeckwindshieldsetting7747]

$1298. plus shipping. Go to rolladeck.net for more details and to purchase.