VOLspeed Tuning for Bosch Smart System (En)
Вставка
- Опубліковано 19 січ 2024
- Deutsche Version:
• VOLspeed Tuning für Bo...
Installation and operation of the VOLspeed for Smart System (P/N1318) in a Cube Stereo Hybrid, model year 2022, with LED remote and Kiox 300 display.
The tuning is also suitable for bikes with Purion 200, Kiox 500, Intuvia 100 or the system controller.
It is not suitable for bikes with a rim magnet or Bosch ABS system.
More info / Shop:
blog.volspeed.de/volspeed-tun...
www.volspeed.de/VOLspeed-E-Bik... - Спорт
Hi, do i have to remove the battery? i cant find my keys but want to get it fitted and have a play while i wait for replacement keys. Thanks.
What about if you don't have the display? Do you enter -+-+ then > to increase the speed?
Operation is identical without the display:
To activate tuning, press - + - +
If you want to increase the limit, e.g. by 5 km/h, press - + - + + + + + +
I've just bought the latest smart system volspeed but don't have a kiox , can i use the flow app on my phone? - thanks
Hi thanks for the video, do you think there’s room for the volspeed box and a Bosch connect module?
We have some customers who use the module together with a Connect module. It depends very much on the actual bike whether the space is sufficient. All bike manufacturers use their own covers. Therefore, the available space varies greatly.
finally got around to having a look inside mine, it actually has five plugs all with wires going into them. can you elaborate on what I need to do or purchase?
If 5 connectors are connected, then the bike is probably equipped with permanently installed lighting -> display, speed sensor, battery, front light, rear light. The tuning will of course still work.
Hello!
I plan to buy a tunning chip for my new cargo e-bike. I bought a Cube Longtail Hybrid Sport (Kiox 300 and Bosch Cargo Line). Which tunning module I should get? VOLspeed Bosch Smart System V2 P/N 350?
Thanks in advance!
You can use the following tuning for the Cargo Line motor, Smart System:
VOLspeed E-Bike Tuning for Bosch Smart System V2 (P/N 1350)
Information about the product can be found under the following link:
www.volspeed.de/VOLspeed-E-Bike-Tuning-for-Bosch-Smart-System-V2
Please note that, as stated in the article description, this tuning is not compatible with bikes with rim magnet or ABS.
hello. I just bought volspeed bosch smart System p/n1318, for a cube reaction pro 2023 only with remote control, I use the sequence of - + - + and there is no change... can you help me with an advice... thank you
you need to look at the cooments
reply from volspeed to K3vo93
Our VOLspeed for the Smart System (P/N 1318) is unfortunately not compatible with the latest software version 11.9.3 for LED-Remote, System Controller or Purion 200.
Since 3.5.2024 there is a new tuning, the VOLspeed for the Smart System V2 (P/N 1350).
Information on the new tuning module can be found under the following link:
www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F1350
This module has the same functionality as its predecessor, but is compatible with the latest Bosch software.
Old modules (P/N1318) will also have the option of a software update from 3 May 2024. Unfortunately, the update is not free of charge. Details can be found under the following link:
www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F9011
Please note that you can only order the update directly from us if your delivery address is in the European Union. For all other countries, please contact the dealer from whom you purchased the product regarding the possibility of an update or exchange.
@@volspeedebiketuning4391 I have version 12.13.0, this will work?
When will a chip for rim magnets be available?
We are working on a solution but cannot yet estimate if and when a product will be launched.
I've removed the battery cover but my terminals and my terminals are round like yours but the terminals on the tuning chip are rectangular. The chip says for bosch active / performance v4? Is this the correct chip?
Our tuning chips for the Bosch Smart System (BES 3) have the part number 1318 (V1) or 1350 (V2).
The VOLspeed tuning module for Bosch Active / Performance with item number 1233 (V4) is unfortunately not suitable for the Smart System, but only for the old Bosch BES2 system.
@volspeedebiketuning4391 ok thanks, what's the difference between the V1 and V2?
The V2 is compatible with software version 11.9.3 for LED remote, system controller and Purion 200. You can find more information here:
blog.volspeed.de/bosch-smart-system-overview-software-versions-677/?lang=en
@volspeedebiketuning4391 Thank you, I don't have a rim magnet but I have a little magnet in the spokes and a sensor on the frame. If you provide an email address I can send you pictures. The display is the Kiox 300 version 12.9.0. The control unit is the LED remote version 12.10.0. Would the v2 still work as the v1 is no longer available on your website?
Will you ship to Australia?
In Australia, it is certainly easiest to purchase the products from our local dealer Epic eBikes: epicebikes.com.au
So when I install mine it says I need to do the minus plus minus plus code to activate it, but whatever I do nothing happens.
need to look at the comments a couple down
@PEPQC they helpen me quite good actually, they made me look up my motor number and turns out I just ordered the wrong version. Quite quick replies from them aswell in the Netherlands, can't talk on other countries though but for me it was quick and helpful!
@@davidbaz5006 yeah I just ordered V1 and I needed V2, my bad lmao
@PEPQC no problem my guy, sorry for the late responce in the first place
Our VOLspeed for the Smart System (P/N 1318) is unfortunately not compatible with the latest software version 11.9.3 for LED-Remote, System Controller or Purion 200.
Since 3.5.2024 there is a new tuning, the VOLspeed for the Smart System V2 (P/N 1350).
Information on the new tuning module can be found under the following link:
www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F1350
This module has the same functionality as its predecessor, but is compatible with the latest Bosch software.
Old modules (P/N1318) will also have the option of a software update from 3 May 2024. Unfortunately, the update is not free of charge. Details can be found under the following link:
www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F9011
Please note that you can only order the update directly from us if your delivery address is in the European Union. For all other countries, please contact the dealer from whom you purchased the product regarding the possibility of an update or exchange.
if you just have the LED remote how do you know when it activated? deactivated?
When the bike is switched on, tuning is initially always deactivated. If you then enter the sequence - + - + it is activated. You do not necessarily need a display for this.
You can also change the limit without a display. For example, to increase it by 5kph, simply press - + - + + + + + + +.
brilliant thanks for the reply
@@volspeedebiketuning4391Does the limit show within the flow app when using with led remote?
I'm buying this but don't have the display, so wondering if I can use the eflow app?
@@volspeedebiketuning4391Can you see anything in the flow app when it is on?
Tengo la Cube stereo hybrid del 2023 con la ultima actualizacion del Flow App, tiene motor bosch smart sistem, nose si me podrá dar algún error si lo monto? Que chip y versión deberia poner para que sea el minimo probable que dé error?
I have the latest Bosch firmware on my Performance Line CX smart system: 9.13.0, volspeed is fine on it , however once you have fitted the volspeed chip never update the bike again or it will detect the volspeed
@@Lawson7086 Simplemente No actualizar nunca, verdad?
Y puedo utilizar la app Flow para bloquear y desbloquear la ebike?
@@rafahe360 i have been told you can use the Flo app with volspeed but DONT UPDATE, i personally have not used the Flo app with my Volspeed i am to worried, but i may try it...
Okay, but I can use the flow app while I use the unlock module safety if I can't update the firmware? And if I can't, when the module off, I can use the app? Thanks bro!
What happens if you had already updated the firmware is there anything that can still be done to fix it