⚡Install Fender Extension & Tribar Light
Вставка
- Опубліковано 3 кві 2019
- I get this question a lot! This will guide you step by step on how to install a fender extension on a Road King with a working tri-bar light. You can also use this method for Ultra Limited with a few more steps to cover the holes in the fender from your fender tail light.
All body parts used in this video are from www.advanblack.com Color Matched Harley Davidson Touring Motorcycle parts and Accessories.
Tri Bar light can be found here amzn.to/3KXxUTT
(It only has iffy reviews because guys don't know how to wire them in. But I'll show you how!)
Modify your 2013 to put 2014 up Rushmore bags on by watching this video here • Put 14 Up Saddlebags O...
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - sikbaggers...
Twitter - StevenHousden?lan...
Gear
Camera- Sony 4K AX53 - www.amazon.com/Sony-FDRAX53-V...
Wireless Mic - Samson Go Mic Mobile - Samson-Mobile-Professional-Lavalier-Wireless/dp/B0749WP3M3
Wired Mic - Maono - www.amazon.com/gp/product/B01...
Shotgun Mic - Comica - www.amazon.com/gp/product/B06...
Video Tripod - Coman www.amazon.com/COMAN-KX3636-P...
Video Tripod - Pantan BV30 www.amazon.com/Cayer-BV30-Cam...
Zomei Z818c- www.amazon.com/gp/product/B01...
Zomei Z818 - www.amazon.com/gp/product/B01...
Video Lights - IVISII LED Video Lighting www.amazon.com/gp/product/B07...
#sikbaggers #advanblack
The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers and/or Advanblack does not make any representation or warranties with respect to the accuracy, applicability, fitness or completeness of the video content. Steven Housden, SIK Baggers and/or Advanblack does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of Company. The mere appearance of Video Content on the Site does not constitute an endorsement by Company or its affiliates of such Video Content.
Steven Housden, Advanblack, SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user. - Авто та транспорт
Way too much talk! Just do it!
Aaawww is larry having a hard time with words? Hahhahha I dont owe you a damn thing, slick! Oh, and youre welcome for teaching you how to do something you clearly didnt know how to do. Hey everyone reading this reply, In my next video I will only be pointing and grunting at shit...I hope you can figure it out. Larry here has a hard time with words and god knows we need to make all of our videos to suit him. 62 thousand views, lots of thank you's and then theres Larry. Good job poopdick! ( comment pinned for the dumbest fucking comment on my channel this month.) Congrats!
@@sikbaggerswow your kind of a dick. Sure the guy didn’t make the best comment but ya you talk too much as you can see in your reply also.
Thank you for the detailed videos and for helping me out.
I now know that the fender extension will fit my 2011 bike with the 2014 Rushmore saddlebags.
Thank you.
Tommy from Ireland.
This was Soooooo helpful for my winter project. Thank you for making these videos!
Hey man glad it helped you! Pretty easy to do and the turn out is awesome! Thanks for checking it out!
@@sikbaggers so question, can I remove the lower light on my rear fender and add that on. To my 2011 Harley-Davidson Electra Glide Ultra Limited FLHTK
Thanks for your time today on the phone. Can’t wait to get this stuff ordered for my 13 RoadGlide Ultra.
Hey Jason anytime man...need anything else just let me know. Hope you get his installed.
@@sikbaggers finally got my stuff ordered. Looking for rear fender brackets now.
Just completed a CVO saddle bag and fender extension on a 2018 Road Glide Ultra. The Saddle Bag installation went smooth from start to finish. As to the fender extension want to thank Steve for this video, yea it took some time but again smooth as silk. Anytime you drill into a perfect paint job it is a little scary. Your videos are right on the money please keep them coming.
Great to hear! Im glad the video helped you sir!
What did you go to cover the holes in the bottom of the fender ?
@@freedom6919741 I used magnetic American flag.
Thanks allot. This really helped me out. Well explained and easy to understand.
do you guys have video link for 96 to 08 install
So, winter is over. My parts are back from the painter and I'm re-assembling the bike. I found an easy install (cheating, if you will) for the tri bar light if it comes with Deutsch type connector pins on the wires, which mine did. (35 bucks on Amazon) I looked at the where the wires attach from the stock tail light into the plug. I slipped the connectors into the appropriate spaces. They made a good connection and were kind of snug in there. I have some 3M VHB clear tape so I took a small amount and applied it to the pins and pushed them back in. Works great and they're stuck in there good. No wire cutting or splicing. Just a thought for those who may not necessarily be comfortable cutting their wiring. I am but took the easy way. You could also tin bare wires with solder and try the same thing to see if it works for you. Another side note. I know painters who are wary of after market bags, etc. that require painting because of the finish quality. My painter in the Toronto area has been doing custom hot rods and bikes for 25 years plus and asked me where I got my accessories...extended bags, flared side covers and fender extension. I said Advanblack. He was extremely pleased with the quality and said how easy it was to work on them and paint them. So, if you're looking at customizing your bike, Advanblack parts should do the trick for you!
Thats awesome to hear Dave! Glad you found and shared your trick with us too! We hear that a lot from painters..Our local painters love the stuff...super easy to work on and super easy prep before painting. Thank you again for sharing!
@@sikbaggers Quite welcome!
Excellent tips and instructions 3/4 of the way through the process.
glad to help Don!!
Thank you Sir! Second time watching one of your videos and I'm impressed with the detail and video clarity. I had an idea of how I'd install the fender extension on my '17 RG Ultra and this was pretty well what I would have done. I have no issues doing the drilling but your advice for the stud plate assembly and flange nuts is something that never would have occurred to me. Easier than having to stick a wrench behind the fender when tightening or loosening! Cheers! Dave...
grateful that the video helped you sir..this mod gets done quite a bit..not sure why HD doesnt just throw on an extension when it comes out.
@sikbaggers can I fit a 2011 road glide rear fender on my 2012 road king and then install this fender extension? Will the fender bolt right on?
You got me psyched up to tackle this!
Hey Ed...you got it..take your time and itll go right on...I know its nerve racking drilling your fender..but youll get it.
Steve it's good to see new videos! Weather in central Illinois has finally broke and we got our first official weekend of riding in. Hopefully soon I can ride down your way!
Yes sir! Looking forward to it ..weve been out a few times this year already...I had shoulder surgery a few months ago so im taking baby steps getting back on that heavy bike. Looking forward to getting out for a full days ride though.
I definitely understand taking baby steps. I remember when my dad had his heart attack and heart surgery. And while he still had the thing on that he had to wear when he would cough to squeeze his chest together, the neighbor called my mom one day because my dad went out and got on his 03 Electra Glide Classic kicked his leg over it stood it up and fired it up. She thought he was getting he was getting ready to leave lol. Well apparently I should have kept my mouth shut. Bragging about how we had good weather and Saturday we are on the bike be it a short day because it was a little chilly and then Sunday we get 4 inches of snow which is almost gone already!
@@joshuaquigley364 hahah yeah sometimes a guy just needs to sit on it...I understand that. We got some wind down here but no snow...lots of rain coming this way though...not looking forward to that at all.
thanks for the detailed instruction
You're very welcome!
Great walk through bro.
thank you...I hope it helps.
What would you suggest for the chrome trim at the bottom of the road king fender?
If you are able to talk with the manufacturer of the extension suggest they design one to cover the holes from where a fender tip light was mounted. Instead of the lip going underneath have it go on top the same measurement as the tip light.
Good Evening I have an 99 road king and was looking to put on a extension fender and 4.5 Saddlebags. But looking at my bike not sure if it can be done cause of the tour pack and rear seat.
Hello Steve. Thank you for this video but I do have one question about the antenna . Why can't we just drill a hole in the part and pass the antenna rod through it. ( you could even add a rubber grommet to look more oem.) ? Thanks.
You are a Blessing!
Thank you sir..much appreciated. Any questions please let me know.
Hey there,thanks for those videos that help a lot, I got a question, I have 2018 Road king with custom dynamics filler chrome light, in the chrome area,I like the way it looks, just adding arlen ness extension saddlebags but I would like to leave the filler with chrome base and light by just adding a rear fender extension with the tribar light is that possible because most of the filler overlay the chrome..?
Do you have anything that help to buy it from you.?
Thanks in advance....👋😎
I have a '05 Road King Classic with Leather Bags. I want to modify the rear fender to look like a street Glide with the Tri Bar tail light and blinkers on the side extension. Is this possible to swap fenders and put a lower extension with Tri Bar light ?
Hey, love your videos. I have an 08 Road King and purchased the extended tail piece to accommodate the stretched bags I purchased all from Advan Black. There are no mounting holes for the tail, so I will have to make it work. I was warned by one of the guys at Tech Support that the tail is stretched to 7” in which it kinda looks ridiculous. I was wondering, if at all possible, you could do an install and modification to cut down the tail section?
Hey man....that was was me you talked to at tech support. I had a buddy cut his down and sand it out smooth and have it painted...looked awesome. Just gotta take your time making your lines and cutting.
Thank you for taking the time to do this! Do you know if you can just plug the tri-bar (custom dynamics) into the socket for the OE tip light? I have a custom dynamics brake light and don't really want to tap into it.
Also, did you use any kind of paint on the new holes to seal them or just them them bare?
Youre welcome..I do not think there is a plug and play adapter for these...I searched and just decided to tap into the main line. Its not bad just easier with two people ..one probing wires and one hitting the brakes blinkers etc...didnt do anything to the paint...havent had any issues with it.
Can't you tap in for the turn signals also?
Would this work for a 06 ultra classic
So it’s 09 and up only? Won’t fit on my 07?
I have the same bike I’m using the same 2014 advan black saddlebags
So I wasn’t sure what fender extension to purchase so now I’ll order the 2014 extension
09 to 21 fender extension is one one the same..they are listed by different years due to color choices. Its the exact same extension for all year 09 and up
@@sikbaggers I’m just running vivid black good to know there all the same 😎
What size screws did you use? They didn't come with the light. Thanks.
i want that look on my 2006 ultra classic anyone know how i could get that tired of looking on the net and find nothing Thanks
Would this be the same for a 09 road King classic, I hear the quick disconnect hardware is in the way, can you confirm, or deny? Awesome tutorial!
the 09 to 13 road kings should all be the same..this video install was on a 13 and had no issues with any hardware
Well done. Simple explanation. Is this cheaper than just getting a streetglide's fender n putting it on a rk?
depends on what you can get the fender for but id say a definite yes. The extension doesnt cost much from advanblack. Even if you get a sg or rg fender with the extension you still need a tri bar light and it cannot be a HD one that is plug and play because your bike is not wired for a plug and play kit and HD doesnt make an adapter ...so yours till buying the amazon pre wired tribar light or similar. So the cost the extension vs a fender and extension
Awesome video so can I use this for my 14 ultra limited?
yes it will be the same install for ther road king and the ultra...just check the fender tip and make sure you don't have a light down there or you will have a hole behind it that the extension will not cover.
I’ve got a 2005 bagger and want to do the 14 up bags and fender extension. Hope to see a video of what’s available
Hey Sean..You can do the same thing with the bags by adjusting the front bracket to line up with the newer style bags however the fender extension you need for an 05 is not this one but the 08 down extension. Its a 7 incher though and longer than these bags...it is installed exactly like this though if you wanted to do it. Instead of using the bracket from HD just line it all up and use 1/4 - 20 bolts and nylock nuts to install.
@@sikbaggers very helpful video! i have a 05 Flht and had to order the 7 inch. i didn't like the lower look of the fender so i cut it even with the extended bags. looks great, thanks for the help with all your videos.
@@lilerb1313 Hey thanks man...yes we have done that here as well..marked it off, cut it, smoothed it and had it painted. Turned out great. I agree the 7 incher for the 08 downs is a bit much
can i even get this extension for my 2014 road king since it has the chrome filler panel holes i currently am running the custom dynamics filler panel lights but am looking to get stretched bags so im trying to fig out a way to also install the extended fender
yes it will fit 09 to 2020 bikes, same extension. It will pretty much be the exact same install as this bike here.
Is 4 inch exhaust the largest size this advan black
will accommodate?
No you can run 4.5 .make sure your exhaust is centered up and then use the rubber shims they provide to place on the bag bracket in the rear. It's about a 1/4 inch and its enough to accomadate the 4.5
I am putting an extension on a 2015 RK. Will I have to worry about losing the extension while going down the highway if I use the double-sided tape instead of drilling holes in my fender?
the extension is designed to be flush up against the fender..so if you use tape it will leave a gap because the tape is so thick and it wont look right. You don't need to drill 3 holes, that's just how had does it so it keeps the extension flush for the full length of the side panels. I would do at least 2 holes and would not use the tape.
Awesome video will these steps work the same on a 97 road king ?
Yes..but the fender extension is different than the one shown here...the bikes changed in 2009 to a wider and longer frame..so make sure you purchase one for 08 and older bikes.
Is the process the same for a 2015 Road King? Do I have to remove the chrome brackets that are already between the bags and fender, of does the extension go over them? Appreciate any help you can provide.
yes it is the same thing...and you cannot remove the chrome pieces, thats all part of the fender strusts..the extension goes over it.
My ? Is I have a 2018 to where I have the extra chrome to where I can put the filler lights in...so would the bracket still fit
fender extension goes above the rear strut covers, which is what you are referring to..it has nothing to do with the fender extension.
Do you have a video of how you lowered the tag ?
The bike came stock this way..what do you mean by lowered the tag?
Thank you for this video brother. I do have a question. Would the filler/extender fit a '05 electra/ultra? I just bought myself a pristine one and the first two things I want done are the extended cases and fender filler.
there is a fender extension for the 08 and older models but it is a 7" extension ...doesnt have the tri bar light
@@sikbaggers thanks. I found that one earlier. Bummed that it's 7 inch and doesn't have the tri bar slots. I'll just try to get one for 08 and up and modify it.
@@Moonen100 let me know if the 08 worked out for you on your 05 i have a 06 and want the same look thanks
Great illustration! Do you have a link or part number for the fender extension? Thanks.
www.advanblack.com/parts/harley-parts/rear-fender-parts/fender-kit.html
Can this be done to a 02 Road King with the brake light?
yes but not with this fender extension..this one is 09 and newer...youll need the 86 to 08
Will this work on a 2012 ultra classic
yes it is the same install..but if you have a light at the bottom of your fender in that bumper that you have to remove it will have a hole in the fender you cannot cover up. If you don't have a light at the very bottom edge of the fender you will be fine.
Hi, will this work on my 2008 Road King?
It will not...the 08 and older models have a more narrow rear end ....they sell extensions for 08 and older but it will not have the tri bar light at the bottom and most are 7 inch..which is longer than most stretched bags
I’ve got a 2020 road king, will the fender extension mount right up or will I need other parts?
I got the same bike, I also have the same question? Did you ever get an answer?
@@chrisdeluna822 unfortunately not.
Where did you find the stud plate? I can't find that anywhere
I ghave the part number in the video....its 59818-09
STUD PLATE ASSY...purchase it at harley
Will this fit my 2005 roadking
no..the 08 and older bikes have a much more narrow rear end..you would need the 08 down rear fender extension.
Did you have to modify the fender support bracket so the extension can slide up behind the fender?
No...the edge corners of the extension slide up between the support bracket and the fender. It will be tight but thats where it goes.
@@sikbaggers Do you you leave that nut loose before sliding up the fender extension then tighten it down once in place? I was dry-fitting it last night and just seemed there was not a enough room to get a flush fit.
will this work on a 2014 road king also
yes ..the rear fender extension is listed for 09 to 13 and 14 up...but its the exact same extension...it hasnt changed since 09
How it looks with leather bags? Anyone have a picture?
Hey im not sure you will find a pic of that...the leather bags are pretty short and the extension is rather long. This is an extended version of what come on street glides and road glides so even longer than the oem one. You may look for an oem size extension for your bike if you want to run leather bags though. Might match up a little better.
Does advanblack have a color matched wrap around fender for 17 road glide?
no we dont have any wrap fenders at this time but we are working on then..a 19 and 21 version.
@@sikbaggers ok, thanks
How did you move the license plate down?
This particular model has the plate mounted under the light. Various year model road kings have the plate up above or below the light bar. You can do a Harley Davidson Plate Relocation Kit - Top To Bottom Swap ...there are several on the market. Some come with a new center lens and some dont. You will need a new center lens because the top of your center lens now has a white cut out for your plate light and that lens cannot be flipped. So you need to look for a center lens with license plate light on the bottom.
what are the dimensions or model on the bars on that road king? I also have a 13 FLHR and I'm looking for different bars in the 1 1/4" size...like those alot!
Hey Bria ..not sure man..but I do know they are the stock bars for the 13 rk.
@@sikbaggers thanks...they look thicker (1.25") on the video than the stock 1". Could be the lighting. Appreciate the reply, and love your videos!
@@brianraber4232 Thank you sir...much appreciated The owner put grips on the bike when it was bought this year and he said he had ordered grips for the stock bars. And now he wants to change the bars as well as they sit too far back on him..hes a tall dude.
Awesome video! Do you have a link to the tri bar light you used?
www.amazon.com/gp/product/B016Y299JU
@@sikbaggers thanks!
One more question...is the part of the extension that goes under the very rear of the fender supposed to sit between the fender and the bracket or just sit in front of the bracket? Tight squeeze in between on my king.
@@themotocanuck You ned to loosen the fender bracket nut above where the tri bar light is...this will allow you to slip the corners of the fender extension in between the brack and the fender...then re tighten the nut
What tri-bar light did you use?
I used this one, however the plug thats on it will more than likely not match anything on your bike so you will need to hardwaire it like i did in the video. I still dont know what that plug goes to...nothing Ive tested it on so far. www.amazon.com/gp/product/B016Y299JU
What size light bar is this on the back I notice its shorter than the stock and looks better
If you are referring to the dog bone HD light bar it is stock...nothing in that are was changed on the bike.
@@sikbaggers looks nice I know the one on my bike is a long longer but i did see that harley sells one that is 10 inch on there website so I'm going to try that one
How to change front bottom fender on 2012 trike
front bottom fender?
It’s the chrome at the bottom of front fender, messed up when loading over chock.
Can I do that with an 05 electra glide?
Im sorry man...the fender extension we sell only fits the 09 to 19 models./ the 08 down bikes have a more narrow rear end.
Ok thanks. Keep up the great videos.
My friend has a 2007 Street Glide and complains of the ugly non chrome area where his quick disconnect area is. Harley has improved this look on later models, but I wondered if you knew of an add on to dress this area up on the 2007? Any other comments from Harley riders is welcome!!
Would a OEM tribar from a 2015 fit a 2005 roadking?
yes it will
Awesome, thank you
Sorry I meant would a newer OEM fender extension fit a 2005 road king.
Pretty dark to see what you're doing. I know what you did. It was just hard to see. Good explanation though. 🤗
Excellent information, what bothers me is why doesn't Harley Davidson include the nuts with the bracket. They are so fucking cheap nickel and diming their customers.
If my bike has a rear fender tip light can I tap into it for my tribar light?
If you can get the extension to fit in there properly with that fender tip light then yes you could. It would be strictly a run light though. Double check it will fit first before you start drilling holes.