Was the car making a noise for the lower arms to be replaced ? , had a problem with my auris making a noise few months ago turned out to be calliper slider pin needed grease.
Would you recommend in general to avoid using an impact on rusted control arm bolts? Can they snap? Is it better to break them with a breaker bar first? Thank you :)
What brand lower control arm would you suggest, bro?
Jazak Allah khair
Many thanks for this video brother.
Ash from Scotland 🏴
Was the car making a noise for the lower arms to be replaced ? , had a problem with my auris making a noise few months ago turned out to be calliper slider pin needed grease.
It was making a noise from the rear bush. clunking noise and.
You installed the lower control arm without putting the Whiteline Front Control Arm Lower Inner… Bushing ?
Hi hopefully you can help. would you know if this car and the 2010 toyota ractis have the same front lower control arm?
Hi mate thanks for watching really appreciate it. I'll be honest I have never heard of a Toyota Ractis before so I dont know mate
@@TEAMR4ULTV really are you in the UK?
@@TEAMR4ULTV The Ractis is a very rare mini mpv based on the yaris, it replaced the verso.
What is the point to show us when its already installed ? We need to see the most dificult part when you push in the bushes. Thanks
Next time I'll show you
Very helpful Raul. Cheers 🙌
Thanks for watching really appreciate it
Would you recommend in general to avoid using an impact on rusted control arm bolts? Can they snap? Is it better to break them with a breaker bar first? Thank you :)
100%. I always use a breaker bar first then impact gun them
Hey my Sub frame 2 bolts not opening. what i need to do?
Hi thanks for watching. You need to heat them up and then try taking it off.
Hey Thanks for reply i try heat them up but is not coming off 1 bolt its just moving inside. I’m talking about second bolts which u open on 2:09
Is there any other way to open that bolts i asked someone they said cut the subframe and change it what you suggest?
Saludos como puedo reemplazar los bushings de la barra estabilizadora de un Toyota Yaris 2007 hatchback
Thanks for watching really appreciate it please don't forget to like Share and subscribe.
Easy, peasy, lemon, sqeezy. Only if all repairs were that easy, life would be a doddle !!
many thanks feller.
Thanks for watching really appreciate it
Good job
But what about the tracking ?!
Most of the time you dont have to do the tracking only sometimes
Do not strike the spindle.
positive guy
Thanks for watching really appreciate it
Bro your shop don’t have heat i can see your breath , tell this guy to instal heat in the shop.🤔🤔🤔🤔🤔🤣
I know bro it's so cold,