or just know where the spring is. the vision fg is like the easiest knife to keep the spring from flying out with. just lift the lock bar a little before you remove the scale all the way... or literally just put your finger on the spring lol
In 2024, your channel is the only knife-content worth watching. You actually use your tools, and don’t just tabletop a bunch of freebies. Thanks for the hard work!
Surprising how similar most knife channels are, always reviewing unused knives. As a first impression video, that's fine. But you have to use a knife for a review. That's why I like this channel.
Agreed, everyone else seems to be focused on knives they can get for free and they do a small video just LOOKING at the knife. And that's it. I also like Stassas' videos but they are not as entertaining
12:32 don’t worry brother, we’ve all been there 😩 I lost the spring on an AD20.5 in my tiny bedroom and spent 30 minutes looking for it, gave up thinking I’d have to buy a replacement, only to step on it a day later 😅
For working on things that have springs yearning to be free, I've found a good trick is to work on them in a clear plastic bag (like kitchen trash bin sized). Contains any fugitive bits and you can still see what you're doing.
Best knife and knife adjacent channel on UA-cam! I’ve never understood how some wánkers sitting at a table reviewing pristine blades without even showing their face end up with hundreds of thousands of subscribers.
To be fair, if I watch a knife review/ overview I don’t usually care about the reviewers face! And you can make a blade look like new if you just clean it. I don’t know where the problem is when ppl don’t have a lot of hardcore use for their knives, a lot of people only collect knives.
@@dertodesking8379 which is pointless. Like the folks who collect shoes to never wear them. They are not knife enthusiasts, they are investors and nothing more. Buy paintings if you like staring at your collectors piece. Absolutely no different lol
@@dertodesking8379 Perhaps the non users/collectors are the bigger market amongst UA-cam viewers. Nothing wrong with collecting and appreciating craftsmanship of course. I appreciate things where functionality, form and engineering meet but not all do and that’s okay.
@@SixArmedPriest I love it when people think only their way to do things in the correct way! Do whatever makes you happy, who are you to tell people what to do?
@@dertodesking8379 They can, but I also can criticize it as ignorant. Free world right. Doesn't matter anyway, when they pass away, crap gets auctioned off for pennies on the dollar anyway. So all for nothing lol
Just found this channel and I must say this is one of the most intelligent “knife video” I have ever seen. Blows MC and Neeves out of the water. You have a new follower. Thanks
You really are a great knife reviewer. Your videos are super informative, well produced and fun. It's actually useful in decision making as opposed to just trying to induce us to drool over something new. I wish every Video/TV show had pet footage interjections. I'm very curious about the 14c28n on the Vosteed. I assume we'll be graced by a review of that soon, but I would've expected that to have better rust resistance than it did.
You can hammer out the wave on you vise. Use a small hammer and gently tap on kt until you set it straight. You can also do a regrind afterwards to make it look new.
Yeah a lot of people don't understand just how much or a difference a well formed edge apex will perform over a poorly formed edge. Edge quality can damn near have the same difference on edge retention as the steel it's self will. A perfectly formed edge will vastly increase edge retention as well as how well the knife will strop back. Well done edges are incredibly important to performance.
yeah, most of the time even just dropping from 20 degrees per side to 15 per side can almost DOUBLE the effective edge retention of a knife. that’s why i think steels like cruwear and 4v and m4 are so awesome, they already have great base edge retention but are also tough enough that you can take that to a whole entire new level by dropping the edge angle and running them super thin, since they’re all high toughness AND high hardness leading to amazing edge stability and durability.
@@airadaimagery692 Most do not split wood with there edc though. This was also mentioned in the video. You should use a dedicated knife for that if you want a knife to last.
Knife companies need to be praised for shipping a blade with an edge this thin, most pocket knives are shipped with an edge suitable for an axe and it takes A LOT of work to get that kind of cutting performance through hand sharpening.
Civivi/Sencut/WE does a good job of this Their factory edge is above average, and the behind the edge thickness is always pretty slicy WE doesn’t really make hard work knives, but cutting and EDC knives So all of them are ready to cut cardboard or rope all day
I'm modding mine. One mm neon green liners. All six holes plugged with polished rounds of abalone shell. Swapping in the Damascus blade off the white G10 version. Halfway there so far. I'll keep batonning and prying to zero.👍
whenever i have to disassemble something that is at risk of exploding i do it inside some sort of bag. a big ziploc is nice because you can see through it.
The vision is one of those knifes where the more everyone else likes it the more I don’t want one. I’m just being obstinate 😂 then again I felt the same way about the Demkos and now I have 5
@@acid6urns I have that one and it's nice, but there are some things to be aware of with the s35vn model that are different. So, first off, the blade stock is slightly thinner (a trait which the damascus versions also share), which makes it an even more slicy knife, but that will reduce the durability even more. Secondly, the carbon fiber scales are very smooth and offer basically no traction; it's not an issue with dry hands, but wet hands or gloves make it an issue. If neither of those are strict turn-offs, then you'll probably love it; I know I do. It's definitely not a hard-use work knife, but as a general purpose EDC, it's one of my favorites.
I have this in Damasteel and I think it's one of the best all-round edc designs out there. That blade angle and offset suits it to most everyday tasks (esp including kitchen prep) and the lock is awesome. In Damasteel and ivory-white scales it's a really pretty piece as well.
Not Damasteel. Just Civivis proprietary damascus which is 9cr18mov based. Damasteel is a specific brand of damascus that is way more expensive than what you find on a sub $100 knife. Still a nice knife though.
Yes, your destruction test at the end is pretty unique in reviews. I just bought a Cold Steel AD-10 LITE (tanto) that I think is a good deal more robust for US$39.99 from Midway USA. Too good a buy to pass up.
15:48 you can see when it got hung up. Those two taps did it in, right at this moment.
4 місяці тому
Awesome ! Great review and very good tests . I’d love to see a test just like this on the new elementum 2 button lock, I just ordered the Damascus one I’d love to see it pushed to its limits and see how the button lock holds up (obviously not as good as this one will) given its design . Great video !
I'm sitting here waiting for my laundry, flipping my VisionFG when this came up. it'll be good to know what not to do with it. ETA: While it is easier to take apart than any crossbar lock I have tried, I was warned to drape a kitchen towel over it for spring retention.
I absolutely agree with the lock actuator feeling "in the way". I couldn't really get used to it or adjust my grip well enough, so I don't pull it out often. I'm not a fan of the clip. It's more traditional than the spine-mounted original Vision-R, but I managed to bend mine up something vicious the first time it was in my pocket in a car. From that ride, the clip also developed some twisting play as it's not captured on both sides... but my scales are micarta that's softer than G10, so that might be the reason behind the play. You can always "sharpen out" the blade warp ya put in it. It'll be a bit thicker behind the edge, but better than considering it junk. Much more a case for the worksharp belt systems to grind through the damage before you put an edge back on it as I think it'd take hilariously long to do by hand on stones.
Those 'photo light tents' for photographing items to sell on the secondary market would be really useful for those who feel strangely compelled to disassemble their pocket knives. I have the Vision FG in the KnifeCenter exclusive in S35V. It's a really good design for light EDC, and one of few (like the Kapara, SpydieChef, Clairvoyant) that's also designed towards culinary tasks.
Hey Pete, hope to get more sharpening videos soon! Can we get one on convex grinds please? Specifically would love one on how to turn a scandinavian grind knife with a micro bevel into a scandi-vex/convex. This is something I have to do pretty much every time I buy a new fixed blade and I'm not sure if I'm ever getting it right tbh
Hello Pete, nice and honest review, thank you very much for it. Did you measure the edge shoulder thickness, right behind the edge bevel? If so, how thick (or thin) is it? Thanks for your help.
I just got a Jake Hoback Summit “Psalm 23” knife. It’s a 4.5” reverse tanto beast of m390 in a titanium frame with bearings and a liner lock. I know it’s strong, but I wish it had a lock anywhere else to make flicking more fun… and dangerous. It’s so sharp. Cool honing set.
great review!! I don't like Nitro V (at least not at that price point) so i waited until the S35VN version came back in stock at knifecenter. It's a cool knife for sure, and being a lefty, I like that it's completely ambidextrous. I will say that the spring on the lock is STRONG. It definitely hurts your finger after a while.
So yeah. My thinking is I like the shape of the knife but it doesn't make sense to put a hugely strong lock (sacrificing ergonomics) on a delicate blade.
I know I’ve said it before, but I love the Final Fantasy music in your videos. I’d watch your channel either way, because of the content, but the music seals the deal
It's so confusing, I recognize 0 of the bird noises in this video and it really confuses me x) Awesome content, Always look forward to these videos. Cheers!
There’s a reason ASTM has established a standard for salt mist testing. Mainly, allowing the mist droplets to dry, reduces the periods of galvanic corrosion to minutes rather than hours. Galvanic corrosion between dissimilar metals poses much higher risk to the integrity of metals than the presence of salt. Other than that, great video, you are getting more and more scientific. That’s the purpose here, to educate, ain’t it, mate?
Pete, if you’re reading this … I saw something today that might interest you. Blade HQ has a Spyderco Blade Show video they released today where Eric Glesser says their SERRATED H2 steel has the highest edge retention of ALL their steels. Including Rex 121. Something about the grinding process changes the make-up of the steel at the serrations. Maybe a new test??
Really appreciate you destroying your knives to test rusting and taking it apart... 2 things I DO NOT want to ever do. LOL 17 degree thin blade battoning... it did pretty well! I'll send you a black G10 version if you want.
I did not have as much trouble getting used to the lock in my grip as much as I had to get used to using a lock that was not in the frame/liner/axis lock position 😂
Cedric, thank you for this comprehensive and informative review/torture test of this new CIVIVI Vision FG! Now I know what "not" to do with my folders. ;-) Though I love the quality of the Vosteed Raccoon and Valkyrie, I find the CIVIVI Regulatron (Nitro V and Micarta scales) to be an excellent EDC, though certainly not for batoning.
Oh Pete, That Vision FG deserves some good knife surgery and rehab so it can find it sway back to your EDC rotation. I have that same model and it is indeed a fantastic do-everything tool. A blade regrind might be all the reconstructive surgery it needs. I'm a hobby knifemaker in Melbourne - I'll try to send you a DM. (I'm not good with these things...)
*sidesteps both the unusually hard wood and all the jokes that come with it* I love my Vision FG for all the reasons you named, Pete. It's excellent for general daily tasks, but it really does shine in the kitchen - moreso than just about any other pocket knife. And the superlock is supremely fidgety. It's honestly hard to keep it out of my pocket. I know that there's a WE Vision with more premium steel, but I hope they do a revision (sorry) that is more like the FG, because I want *this* knife with even better steel.
Well Pete I just had a flipper folder , liner lock from china seized at customs Sydney , I’m in qld, a bit disappointed, I was curious as I see you have many knives of this description “automatic “ as they put it . What’s the deal !! Are we allowed to have them or not I was looking on google and it’s not really clear , Ive recently got about ten folders through and this was the first seizure , I’ve even had them come with letters saying customs inspected and opened it and they had the same exact operation as the one they just seized !! Doesn’t make much sense to me ! Anyway a vid covering this would be good for us aussies, you may already have one I’m not sure .. take care mate
This seems like a really good knife. I’m not really a fan of Civivi knives. Something about many of their designs don’t gel with me and I don’t like hollow grinds that they put on most of their knives. This one is different. The blade design is perfect for food prep which is a lot of what I use my pocket knives for. The only thing I really don’t like are the so called speed holes in the scales. Unnecessary and dumb looking. For the blade try using a hammer on an anvil. I repair and sharpen knives for people. And have seen many horrible edges where someone has tried to use the knife as a screwdriver and such. Careful hammering has worked for me with good results. Thanks 🎸🔪
My friend used my drop bear to baton wood when we were camping, I didn't want to feel like a dick and say no.. might have damaged the bearings just a little bit perhaps but still rocking and rolling
I've take a hard wood plank, ball peen hammer and tap the edge a bit and try straighten it out. It will never be perfect, but will be functional again.
in my experience nitro-v did not well in fighting rust, literally all my 5 civivis have had corrosion issues. that said, they all have that usual civivi bead blast + stone wash finish and not satin.
Hint: I usually use a plastic baggie to catch flying springs, disassemble the object inside a clear plastic baggie.
Pro tip
Disassembly in a black trash bag is more edgy.
or just know where the spring is. the vision fg is like the easiest knife to keep the spring from flying out with. just lift the lock bar a little before you remove the scale all the way... or literally just put your finger on the spring lol
I disassemble mine in the gravel driveway. Makes it more fun trying to find the parts. Lol. Definitely using the bag trick from now on
I like to disassemble while sitting in a nearby river
In 2024, your channel is the only knife-content worth watching.
You actually use your tools, and don’t just tabletop a bunch of freebies.
Thanks for the hard work!
Amen
Pete definitely in league of his own as far as knife channels !
Surprising how similar most knife channels are, always reviewing unused knives. As a first impression video, that's fine. But you have to use a knife for a review. That's why I like this channel.
@@xxswamplordxx2079 💯
Agreed, everyone else seems to be focused on knives they can get for free and they do a small video just LOOKING at the knife. And that's it.
I also like Stassas' videos but they are not as entertaining
We getting spoiled by all the Pete videos! Keep em coming! Super happy you are back posting frequently again! The community definitely missed you!
SNEX IS A LEGEND FOR NOT GATEKEEPING HIS DESIGN. HE DESERVES CREDIT FOR THAT! Gg 😎
Pete, your knife reviews and test, combined with the entertainment that comes along with it, is second to none. Much appreciated.
That is almost the exact same # as the One in Nitro V at 17° i tested on feet of cardboard pretty interesting and great results
Seeing your vision FG made me realize, my pivot is too tight.
I have to adjust and get the drop shut like yours, ty for a excellent upload
12:32 don’t worry brother, we’ve all been there 😩 I lost the spring on an AD20.5 in my tiny bedroom and spent 30 minutes looking for it, gave up thinking I’d have to buy a replacement, only to step on it a day later 😅
For working on things that have springs yearning to be free, I've found a good trick is to work on them in a clear plastic bag (like kitchen trash bin sized). Contains any fugitive bits and you can still see what you're doing.
That’s a good idea. I always use a towel.
Just saying, I would absolutely watch a 30 minute video of just you petting your dogs. Their excitement and happiness is so satisfying to see.
Best knife and knife adjacent channel on UA-cam! I’ve never understood how some wánkers sitting at a table reviewing pristine blades without even showing their face end up with hundreds of thousands of subscribers.
To be fair, if I watch a knife review/ overview I don’t usually care about the reviewers face! And you can make a blade look like new if you just clean it. I don’t know where the problem is when ppl don’t have a lot of hardcore use for their knives, a lot of people only collect knives.
@@dertodesking8379 which is pointless. Like the folks who collect shoes to never wear them. They are not knife enthusiasts, they are investors and nothing more. Buy paintings if you like staring at your collectors piece. Absolutely no different lol
@@dertodesking8379 Perhaps the non users/collectors are the bigger market amongst UA-cam viewers. Nothing wrong with collecting and appreciating craftsmanship of course. I appreciate things where functionality, form and engineering meet but not all do and that’s okay.
@@SixArmedPriest I love it when people think only their way to do things in the correct way! Do whatever makes you happy, who are you to tell people what to do?
@@dertodesking8379 They can, but I also can criticize it as ignorant. Free world right.
Doesn't matter anyway, when they pass away, crap gets auctioned off for pennies on the dollar anyway. So all for nothing lol
Just found this channel and I must say this is one of the most intelligent “knife video” I have ever seen. Blows MC and Neeves out of the water. You have a new follower. Thanks
Came for the review. Stayed for the reveal of the Civivi Vision FG Kris version…
Now that's a very good non-tabletop review 👍
You really are a great knife reviewer. Your videos are super informative, well produced and fun. It's actually useful in decision making as opposed to just trying to induce us to drool over something new. I wish every Video/TV show had pet footage interjections. I'm very curious about the 14c28n on the Vosteed. I assume we'll be graced by a review of that soon, but I would've expected that to have better rust resistance than it did.
You can hammer out the wave on you vise. Use a small hammer and gently tap on kt until you set it straight. You can also do a regrind afterwards to make it look new.
Yeah a lot of people don't understand just how much or a difference a well formed edge apex will perform over a poorly formed edge. Edge quality can damn near have the same difference on edge retention as the steel it's self will. A perfectly formed edge will vastly increase edge retention as well as how well the knife will strop back. Well done edges are incredibly important to performance.
yeah, most of the time even just dropping from 20 degrees per side to 15 per side can almost DOUBLE the effective edge retention of a knife. that’s why i think steels like cruwear and 4v and m4 are so awesome, they already have great base edge retention but are also tough enough that you can take that to a whole entire new level by dropping the edge angle and running them super thin, since they’re all high toughness AND high hardness leading to amazing edge stability and durability.
@@acid6urnssure, but if your using a knife to split wood, a 20 or even 25 degree edge is preferred over a 15 degree, no matter what steel it is.
@@airadaimagery692 Most do not split wood with there edc though. This was also mentioned in the video. You should use a dedicated knife for that if you want a knife to last.
@@SixArmedPriest certainly,. But even if it’s a dedicated knife, one with more a blunt edge, ie 25 degree, is better for more rigorous task.
@@airadaimagery692 Yes I do agree. However most prefer a thinner edge for edc.
Knife companies need to be praised for shipping a blade with an edge this thin, most pocket knives are shipped with an edge suitable for an axe and it takes A LOT of work to get that kind of cutting performance through hand sharpening.
Amen!!
Civivi/Sencut/WE does a good job of this
Their factory edge is above average, and the behind the edge thickness is always pretty slicy
WE doesn’t really make hard work knives, but cutting and EDC knives
So all of them are ready to cut cardboard or rope all day
I cannot tell you how much more I prefer this style of review over table-tops.
Super impressed with that lock performance!
Some past results...
Massdrop perpetua (millet knives) Nitro-v 250 cuts
Realsteel 14c28n - 200 cuts
Nitro-v custom - 61rc - 350 cuts
Civivi Vision fg 325 cuts
Spyderco Kapara s30v - 260cuts
Benchmade 940 s30v - 220
Buck small vantage pro s30v - 290
Thanks for that
I'm modding mine. One mm neon green liners. All six holes plugged with polished rounds of abalone shell. Swapping in the Damascus blade off the white G10 version. Halfway there so far. I'll keep batonning and prying to zero.👍
Share a photo of your mods. I love abalone! Thx.
@@sabrinahammond5475
I'm only on UA-cam. No Instagram, Tic Toc, Facebook, sorry!😩
Love my Vision FG. Thanks for doing a real review, Pete!
You're the oddest, serious reviewer on YT... And I'm here for it
Sweet soundtrack (it took me back in time!) and kickass outro! Oh, and good review too. Cheers
Hell yeah, the cat singing TOOL at the end 🤘🏼
I’ve had the pleasure of seeing them 3 times now and The Grudge was one of my favorite live performances.
whenever i have to disassemble something that is at risk of exploding i do it inside some sort of bag. a big ziploc is nice because you can see through it.
The vision is one of those knifes where the more everyone else likes it the more I don’t want one. I’m just being obstinate 😂 then again I felt the same way about the Demkos and now I have 5
the only one id buy is the knifecenter exclusive with the s35vn steel
@@acid6urns I have that one and it's nice, but there are some things to be aware of with the s35vn model that are different. So, first off, the blade stock is slightly thinner (a trait which the damascus versions also share), which makes it an even more slicy knife, but that will reduce the durability even more. Secondly, the carbon fiber scales are very smooth and offer basically no traction; it's not an issue with dry hands, but wet hands or gloves make it an issue.
If neither of those are strict turn-offs, then you'll probably love it; I know I do. It's definitely not a hard-use work knife, but as a general purpose EDC, it's one of my favorites.
I still laugh when I think of your earlier Demko disassembly video in the old shed with the flying spring. Such a relatable moment 😂. Awesome review.
Great job, proud of you!
I have this in Damasteel and I think it's one of the best all-round edc designs out there. That blade angle and offset suits it to most everyday tasks (esp including kitchen prep) and the lock is awesome. In Damasteel and ivory-white scales it's a really pretty piece as well.
Not Damasteel. Just Civivis proprietary damascus which is 9cr18mov based. Damasteel is a specific brand of damascus that is way more expensive than what you find on a sub $100 knife. Still a nice knife though.
@@tehwulf4291 ah, didn't realise they did their own.
Yes, your destruction test at the end is pretty unique in reviews. I just bought a Cold Steel AD-10 LITE (tanto) that I think is a good deal more robust for US$39.99 from Midway USA. Too good a buy to pass up.
0:36
Putting the entire knife community on blast
15:48 you can see when it got hung up. Those two taps did it in, right at this moment.
Awesome ! Great review and very good tests . I’d love to see a test just like this on the new elementum 2 button lock, I just ordered the Damascus one I’d love to see it pushed to its limits and see how the button lock holds up (obviously not as good as this one will) given its design . Great video !
8:43 is that music from final fantasy?
Good rundown, even with the oopsie at the end. I've pushed knives a mite too far from time to time, and I wasn't even testing or anything.
We need more of this! Never understood the table top "reviews"
Excellent….I bought one a few months ago. It’s great!!…..love the lock….very sharp out of box…..right on young man!!!
I'm sitting here waiting for my laundry, flipping my VisionFG when this came up. it'll be good to know what not to do with it. ETA: While it is easier to take apart than any crossbar lock I have tried, I was warned to drape a kitchen towel over it for spring retention.
Just disassemble it inside a large clear plastic bag. And use a rubber or cardboard surface to rest it on.
I absolutely agree with the lock actuator feeling "in the way". I couldn't really get used to it or adjust my grip well enough, so I don't pull it out often.
I'm not a fan of the clip. It's more traditional than the spine-mounted original Vision-R, but I managed to bend mine up something vicious the first time it was in my pocket in a car. From that ride, the clip also developed some twisting play as it's not captured on both sides... but my scales are micarta that's softer than G10, so that might be the reason behind the play.
You can always "sharpen out" the blade warp ya put in it. It'll be a bit thicker behind the edge, but better than considering it junk. Much more a case for the worksharp belt systems to grind through the damage before you put an edge back on it as I think it'd take hilariously long to do by hand on stones.
Those 'photo light tents' for photographing items to sell on the secondary market would be really useful for those who feel strangely compelled to disassemble their pocket knives.
I have the Vision FG in the KnifeCenter exclusive in S35V. It's a really good design for light EDC, and one of few (like the Kapara, SpydieChef, Clairvoyant) that's also designed towards culinary tasks.
Just use a gallon ziplock bag. That’s what I’ve done when I know I’m going to be dealing with a spring that’s trying to make a bid for freedom.
Hey Pete, hope to get more sharpening videos soon! Can we get one on convex grinds please? Specifically would love one on how to turn a scandinavian grind knife with a micro bevel into a scandi-vex/convex. This is something I have to do pretty much every time I buy a new fixed blade and I'm not sure if I'm ever getting it right tbh
Hello Pete,
nice and honest review, thank you very much for it.
Did you measure the edge shoulder thickness, right behind the edge bevel?
If so, how thick (or thin) is it?
Thanks for your help.
I just got a Jake Hoback Summit “Psalm 23” knife. It’s a 4.5” reverse tanto beast of m390 in a titanium frame with bearings and a liner lock. I know it’s strong, but I wish it had a lock anywhere else to make flicking more fun… and dangerous. It’s so sharp. Cool honing set.
Great review Pete!
great review!! I don't like Nitro V (at least not at that price point) so i waited until the S35VN version came back in stock at knifecenter. It's a cool knife for sure, and being a lefty, I like that it's completely ambidextrous. I will say that the spring on the lock is STRONG. It definitely hurts your finger after a while.
Great vid would love to see your thoughts on the s35vn version
So yeah. My thinking is I like the shape of the knife but it doesn't make sense to put a hugely strong lock (sacrificing ergonomics) on a delicate blade.
Perfect opportunity to customise the blade shape! Could make an interesting wharncliffe still! Could whack a cheeky recurve in there too
Great video. Love seeing the pups. Loved your sheep socks. I think Civivi should send you a new knife or two.
Pete, you stay up why too late, but I appreciate the sacrifice.
Amazing video pete.
Great review. Thanks!
Is there any civivi with a thick blade? They save on steel 😅
dont feel bad about the demko. My flung out and i havent found it since. Got replacements from Aliexpress
Always love your videos brother!
Very Nice Video! Really enjoy your content...I'm from South Africa!
Hey Pete, could you do a cut test with M390MK? Would love to see it!
I’d give double thumbs up if I could for the ff7 music, good memories
I know I’ve said it before, but I love the Final Fantasy music in your videos.
I’d watch your channel either way, because of the content, but the music seals the deal
It's so confusing, I recognize 0 of the bird noises in this video and it really confuses me x)
Awesome content, Always look forward to these videos. Cheers!
There’s a reason ASTM has established a standard for salt mist testing. Mainly, allowing the mist droplets to dry, reduces the periods of galvanic corrosion to minutes rather than hours. Galvanic corrosion between dissimilar metals poses much higher risk to the integrity of metals than the presence of salt. Other than that, great video, you are getting more and more scientific. That’s the purpose here, to educate, ain’t it, mate?
Great review! Civivi will sell you a replacement blade for pretty cheap. They charged me $18 for a Nitro V Civivi Clavi (a much smaller blade)
this Cedric&Ada / Advanced Knife Bro crossover is dope AF
I’ve just secured my jade Vision FG. There’s no chance I will baton with it. It’ll see light duty work most times.
Pete, if you’re reading this … I saw something today that might interest you. Blade HQ has a Spyderco Blade Show video they released today where Eric Glesser says their SERRATED H2 steel has the highest edge retention of ALL their steels. Including Rex 121. Something about the grinding process changes the make-up of the steel at the serrations.
Maybe a new test??
Really appreciate you destroying your knives to test rusting and taking it apart... 2 things I DO NOT want to ever do. LOL 17 degree thin blade battoning... it did pretty well! I'll send you a black G10 version if you want.
My complaint with these "piston" style knife locks is that soft, squishy opening detent.
I did not have as much trouble getting used to the lock in my grip as much as I had to get used to using a lock that was not in the frame/liner/axis lock position 😂
Always good to mix in some dog content with your review. I also like the Vision FG.
Thanks!
Cedric, thank you for this comprehensive and informative review/torture test of this new CIVIVI Vision FG! Now I know what "not" to do with my folders. ;-) Though I love the quality of the Vosteed Raccoon and Valkyrie, I find the CIVIVI Regulatron (Nitro V and Micarta scales) to be an excellent EDC, though certainly not for batoning.
What is the thickness behind the edge?
do a light recurve (karambit style) grind on that vision :O
I am disappoint. I'd planned on picking one of those up. Oh, OK. I won't be using one for batoning. That doesn't put me off at all.
This knife with a Spyderco Seki City K390 heat treat would be money! 🔥
Oh Pete, That Vision FG deserves some good knife surgery and rehab so it can find it sway back to your EDC rotation. I have that same model and it is indeed a fantastic do-everything tool.
A blade regrind might be all the reconstructive surgery it needs.
I'm a hobby knifemaker in Melbourne - I'll try to send you a DM. (I'm not good with these things...)
That Demko is the AD20, I believe.
Other than Brian Winters, Snex would have won Designer of the year.
Civivi should send you one. I added one to my cart after this review
*sidesteps both the unusually hard wood and all the jokes that come with it*
I love my Vision FG for all the reasons you named, Pete. It's excellent for general daily tasks, but it really does shine in the kitchen - moreso than just about any other pocket knife. And the superlock is supremely fidgety. It's honestly hard to keep it out of my pocket.
I know that there's a WE Vision with more premium steel, but I hope they do a revision (sorry) that is more like the FG, because I want *this* knife with even better steel.
Yessir. Can’t blame the knife for that one.
I continue to watch these videos because I like knives and final fantasy too.
OMG YOU SHOULD HAVE TESTED THEIR DAMASCUS!!! SUCH A MISSED OPPORTUNITY MAN. WE HAVE SO MANY QUESTIONS ❓
As a result of this video, I went from not liking the Vision FG to thinking I might actually get one. Thanks.
Well Pete I just had a flipper folder , liner lock from china seized at customs Sydney , I’m in qld, a bit disappointed, I was curious as I see you have many knives of this description “automatic “ as they put it . What’s the deal !! Are we allowed to have them or not I was looking on google and it’s not really clear , Ive recently got about ten folders through and this was the first seizure , I’ve even had them come with letters saying customs inspected and opened it and they had the same exact operation as the one they just seized !! Doesn’t make much sense to me ! Anyway a vid covering this would be good for us aussies, you may already have one I’m not sure .. take care mate
This seems like a really good knife. I’m not really a fan of Civivi knives. Something about many of their designs don’t gel with me and I don’t like hollow grinds that they put on most of their knives. This one is different. The blade design is perfect for food prep which is a lot of what I use my pocket knives for. The only thing I really don’t like are the so called speed holes in the scales. Unnecessary and dumb looking. For the blade try using a hammer on an anvil. I repair and sharpen knives for people. And have seen many horrible edges where someone has tried to use the knife as a screwdriver and such. Careful hammering has worked for me with good results. Thanks 🎸🔪
My friend used my drop bear to baton wood when we were camping, I didn't want to feel like a dick and say no.. might have damaged the bearings just a little bit perhaps but still rocking and rolling
Nice knife, even better review!
✌️
Hammer the blade flat?
another excellent vid
I love this video but wtf is the classical trap music in the background lol?
came for the knives, stayed for 17:39
I've take a hard wood plank, ball peen hammer and tap the edge a bit and try straighten it out. It will never be perfect, but will be functional again.
in my experience nitro-v did not well in fighting rust, literally all my 5 civivis have had corrosion issues. that said, they all have that usual civivi bead blast + stone wash finish and not satin.
I’ve said this before and I’ll say it again:
Knife center exclusive Civivi Vision FG in S35VN and carbon fiber scales. That is all.
Whoa!!!!!……hold my wallet
I often forget how hard my wood is. With similar results.
we got Rex121 and Micro-melt PD#1 coming to our pockets soon!!
And the Stretch 2 XL in K390!
you could grind down the knife to get ride of that torqued metal.