Jeep Wrangler Unlimited Aftermarket Keyless Entry Installation
Вставка
- Опубліковано 7 жов 2024
- How to install a keyless entry to your Jeep Wrangler unlimited. Tools required: screw driver, drill, Dremel or some type of cutter for the plastic, T25 torque bit, 7mm socket, panel removal tools, a hand crank clip removal tool, and a lot of patience. If you have any questions just leave it in the comments.
You my good man are a life saver! Thank you!
Can you post a link to complete parts for anctuators and etc. Thanks
region015 the actuators that I used is no longer available on Amazon. But any actuators will work.
Did you do the tailgate?
No sorry I did not.
How did you connect the wires in the back?
@@waynesalter3540 For the tailgate? I didn’t add that one.
@@alexc.1982 front door and the back door
@@waynesalter3540 So I bought a kit that came with a module (wireless receiver). I ran all the wires behind the front console. I wanna say the module was under the steering wheel panel.
I'm thinking of getting a 2017 wrangler unlimited sport.. it's the perfect in every way except it doesn't have power windows or keyless entry. My husband is okay with car things but not great. Would this be super difficult to do?
Honestly unless you are decent with tool I wouldn’t try it. Sorry for the long wait. Hopefully you got the Jeep even without the powered stuff they are so fun.
Where do you connect the actuator wires to?
Mine came with a controller that they all connected to.
How many relays are you using and how do you wire them ? Thank you
Frank Maciel it came with all the parts but I do believe it was just one relay. It was prewired.
Where did you place the control board for the power lock system? Thanks!
Collin Clayton I put the control module behind and above the pedals. There's plenty of room back there.