hi sorry, nice video done well. But I encountered a little one problem, the extruder ruins the filament when it passes between the two gears? what can I do or what am I doing wrong? the filament does not make a smooth movement like with the old extruder
Damn it, I wish I had found this last night. I wasn't sure about updating the e-steps and I was having issues with the stock titan clone not being able to print PETG so I bought a E3D titan so it would be a direct drop in. I could have gone this route and it probably would have worked better. Now I know what to get next time it fails on me.
Is there any way you could make a video, on how to change the E steps on this machine. Because I can't find a video anywhere out there of, how to change my E steps. I did all the calculations I know what my E steps should be but I can't change them on the printer, and I don't really understand how. there's nothing i could find to help me on how to do it. So I think it would be educational, and really helpful.
Thanks alot! I havent used my QQ-Spro in 2 yrs because the factory extruder was as aggravating as a butt full of flared up hemorrhoids. Are you still using the factory hotend?
Hi, great video, you made me purchase this extruder ahahaha, can you please send me the STL file for the spacer, so I can print it before disassembly the extruder, thank you in advance
@@smokegrenadelauncher Okay, I'll work on getting it on Thingy next chance I get. Here's the link: store.micro-swiss.com/collections/extruders/products/micro-swiss-bowden-dual-gear-extruder
Thanks for the video. I've done today the change to the micro swiss, but now I'm hearing this beeps while it retracts. Is there something to be done on the stepper driver? ua-cam.com/video/fCE_ICkhxY8/v-deo.html
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Modified Q5s are the sleeper cars of 3D printing.
I can confidently say you explain things more clearly than anyone else I know!
hi sorry, nice video done well. But I encountered a little one problem, the extruder ruins the filament when it passes between the two gears? what can I do or what am I doing wrong? the filament does not make a smooth movement like with the old extruder
Damn it, I wish I had found this last night. I wasn't sure about updating the e-steps and I was having issues with the stock titan clone not being able to print PETG so I bought a E3D titan so it would be a direct drop in. I could have gone this route and it probably would have worked better. Now I know what to get next time it fails on me.
I have got a Moon step extruder, It could be compatibile with the Q5 ?
Is there any way you could make a video, on how to change the E steps on this machine. Because I can't find a video anywhere out there of, how to change my E steps. I did all the calculations I know what my E steps should be but I can't change them on the printer, and I don't really understand how. there's nothing i could find to help me on how to do it. So I think it would be educational, and really helpful.
Have you seen this guide? I may have a simplified version, but this should get you started.
flsun.community/guide/calibration.html#e-step-calibration
Where Can I buy estruder upgrade?
Thanks alot! I havent used my QQ-Spro in 2 yrs because the factory extruder was as aggravating as a butt full of flared up hemorrhoids. Are you still using the factory hotend?
Yes, still using factory hotend. Works fine for me.
Thanks for this, much appreciated.
Other than the E-step calibration, are there any other changes to firmware with this extruder?
No other changes to firmware but settings in slicer may need to change accordingly.
Do you think this extruder will work the the super racer
You can use an OMG extruder with the SR
Can this work for super racer
You can use an OMG extruder with the SR
thanks for the information!
thank you for this video
You are welcome!
Hi, great video, you made me purchase this extruder ahahaha, can you please send me the STL file for the spacer, so I can print it before disassembly the extruder, thank you in advance
Sure, but I'm not sure how to send it. Any suggestions?
@@baxrok2. you can upload it to Thingiverse or the like then link to it? do you have a link to the kit?
@@smokegrenadelauncher Okay, I'll work on getting it on Thingy next chance I get. Here's the link:
store.micro-swiss.com/collections/extruders/products/micro-swiss-bowden-dual-gear-extruder
@@smokegrenadelauncher www.thingiverse.com/thing:5275350
Thanks for the video. I've done today the change to the micro swiss, but now I'm hearing this beeps while it retracts. Is there something to be done on the stepper driver? ua-cam.com/video/fCE_ICkhxY8/v-deo.html
Beaucoup de blabla pour...
Okay, well then you make a video of your own that's better and less "blabla." Until you do, shut the hell up.
@@baxrok2. Thank you for the video, was looking for upgrades for the Q5.