I couldn’t fit the qs10 under the lid, see the end of the video for the amount of the lid I cut off The stock lid percentage window also doesn’t line up too well, but if you look at the right angle you can still view the percentage without popping the lid
For the kind of money chi boards or chi battery wants these things should be perfect. Was a part of the esk8 world and that’s where I first talked to dude at that’s been 7 years or so. Great guy they should make those fit better but it gets the job done none the less thanks for the reply
@@bill_ebikethis is what i want to also desperately know, i wanna upgrade the breaker and keep it. i have a 81 touring coming in about a month. I also got the qs10 connectors and only realized how much bigger they are then they qs8 connectors because of your video. Also wondering if the lid could potentially not need to be cut, if the lid extenders where a bit longer? Although it looks a bit cool with the cut out i’ll say!
Yes! Stock motor doesn’t like a whole lot of full throttle pulls though. I wouldn’t go full throttle for more than 30seconds to 1min at more than 15kw It heats up extremely fast compared to aftermarket motors. Just watch your motor temps and you’ll be okay.
@@avestab82you would have to ask them. I have no clue. I personally am not a fan of KO. If anything go with a EBMX motor since you’re getting the ebmx controller
got this battery without seeing any videos finally!
@@surronshi that’s one of the reasons I made one. I couldn’t find ANYTHING about it anywhere
@ can you make a riding video
@@surronshiyes. I’m waiting on my camera to get back from being repaired. When I do get it I’ll do a video
Best install video out there ! Very informative. 👍
@@brandonanderson8010 thank you bro 🤙🏽
How is the battery? Do you notice the weight and height?
I’m planning on getting the 8050 touring
🔥🙌🏽
Did you have any figment issues did everything line up and you can see the screen on top of the battery?
I couldn’t fit the qs10 under the lid, see the end of the video for the amount of the lid I cut off
The stock lid percentage window also doesn’t line up too well, but if you look at the right angle you can still view the percentage without popping the lid
No other fittest issues other than the massive connector
For the kind of money chi boards or chi battery wants these things should be perfect. Was a part of the esk8 world and that’s where I first talked to dude at that’s been 7 years or so. Great guy they should make those fit better but it gets the job done none the less thanks for the reply
@ supposedly they are supposed to fit, they said mine was the first that they hadn’t seen fit
please make the breaker vid I don’t wanna takeout my breaker
Literally doing it as I type this
Very very difficult with my massive qs10 wires
@@bill_ebikethank you looking forward to watching!
@@bill_ebike no joke 😂 especially with the breaker installed it only takes up more space.
@@bill_ebikethis is what i want to also desperately know, i wanna upgrade the breaker and keep it. i have a 81 touring coming in about a month. I also got the qs10 connectors and only realized how much bigger they are then they qs8 connectors because of your video. Also wondering if the lid could potentially not need to be cut, if the lid extenders where a bit longer? Although it looks a bit cool with the cut out i’ll say!
Can I run the 81v batter on the stock motor and different controller
Yes! Stock motor doesn’t like a whole lot of full throttle pulls though. I wouldn’t go full throttle for more than 30seconds to 1min at more than 15kw
It heats up extremely fast compared to aftermarket motors. Just watch your motor temps and you’ll be okay.
@ I’m planning on ebmx 9000 v2 with chi 81v and ko big block would that work?
@@avestab82yes the EBMX9000 Will support 92.4v max.
@@bill_ebike but does the ebmx support the big block?
@@avestab82you would have to ask them. I have no clue. I personally am not a fan of KO. If anything go with a EBMX motor since you’re getting the ebmx controller
How long did shipping take
@@PNWSURRON about 2 weeks. They already had it built though
@ thanks dawg I just ordered mine yesterday🤘🏼
When will the breaker vid come out
Hopefully in a week
Breaker video uploading now
make a riding video