HOW TO FORGE TONGS ON A POWER HAMMER
Вставка
- Опубліковано 30 жов 2018
- Shirts are only available for 7 more days! Help support the channel here - www.bonfire.com/made-of-axes/
RESOURCES FOR MAKERS AND AMAZON AFFILIATE PRODUCTS
My Book - If you’re looking for a place to start in blacksmithing this is an invaluable resource that was written FOR YOU!
amzn.to/2l8pyMm
Heavy duty wire brush (for scale/slag) - amzn.to/2MutSSL
Spray adhesive (also kills hornets) - amzn.to/2LTu7Wm
THE BEST metal grinding rocks (heavy stock removal) - amzn.to/2Mxh5ik
Blue Dykem - amzn.to/2LQfhzW
Red Dykem (if you want to be a trend setter) - amzn.to/2JIkdtR
STRONGEST Epoxy for knife makers - amzn.to/2tmxtcI
Acid for etching Damascus - amzn.to/2ld0OTm
JET shop air filtration system - amzn.to/2JP4UzB
Metal cutting disks - amzn.to/2t0JPrt
Sharpening stones
www.hoffmanblacksmithing.com/...
My Website
www.hoffmanblacksmithing.com
Music courtesy of Epidemic sound. - Розваги
love the breathing and the dry smacks of the powerhammer
I find the "breathing" of these machines intimidating.
You hammering at night?? Neighbors gonna love you 😂
timothydalton90 agreed
I learn everytime I watch. I love this forging. Knives are so tedious and take a long time, but are definitely worth the wait. But old school forging is my favorite. Thanks for making a old guy happy.
When Alec steel gets to Montana, you guys should totally do a collaborative project.
I work on a powerhammer sometimes. The man who owns it, said to me to always place the wood back between the hammer and dies when your done.
So the hammercyllinder is on the top of its stroke, because of Grease and dirt that collects on the cylinder
Nice video men.
Congratulations on your new shop and hammer.
Very nice new power hammer. Would love to see some clips of the finishing work too. Love to see some good ol' fashioned anvil pounding.
I've done it for almost fifty years, here and there, making the odd tool as a mechanic and machinist, but have been getting set up to do more, now that I'm retired, mostly. I'm real impressed with the speed and accuracy of drawing out, and "roughing the tongs", I've made several over the years, all by hand, all crude, not even as nice as "rough". I want a power hammer badly, and will probably build one this winter, I think I've got enough steel. Thanks for a skillful demonstration of a very nice job, setting up a pair of tong halves, I hope to match it someday.
the best ever video i have seen. your really a very good learner and hard worker and obviously god gifted too. you must have been observing your master very sharply. keep it up.
Awesome video.
Yes I learned something as I do on most of your training vids. Thanks for taking time to teach. Look forward to the next one.
I'm glad to hear you say that rebar makes good tongs,...... I've just started forging. A old blacksmith told me to make my own tools. The tongs i've made from rebar are better than the ones from mild steel.
Just don't quench in water. They will get brittle
Love these videos, always a good thing to learn whatever I can.
I think you need a fence around your forging area to keep dogs out! And hearing and eye protection for him!!!!! LOL 🤣😂🤣 That ways amazing to see a pair of tong blanks made in about 10 minutes with 2 heats!!!! Nicely done 👍👍👍👍
Great video! Those big hits were huge, you could tell by the change in pitch......looks like great fun!
Yes, enjoyed it. Can't wait to see what all you make using that beast.
Shop is coming along nicely! I bet in 2 weeks you'll have the hang of the power hammer and will be rocking it!
Just finished building my power hammer and still very green on using it. It is a beast, hits very hard when the stroke is adjusted to, will make up a kiss block like yours and give that method a go!
That was awesome. Thank You for sharing. I bought a Power hammer today and to tell the truth, I am nervious to try it. A few more videos like this and I will be ready to go.... Thank You......
Great work Liam.
Nice! I do like my tongs with longer and somewhat thinner tapers for the reigns instead of short and chunky/clunky lol. Will be nice to see how this well endowed power hammer changes your pattern welding with regard to getting into different and more advanced patterns. Now you can begin getting more into with some mosaic patterns and Turkish twists etc., although it may help to get also get yourself "mr. twister" before doing the latter 😉. Good stuff Liam, lookin' forward to more 👍
I have always learnt from you guys thanks for sharing
Great video love it as always and keep up the great work 🔨💪
Enjoyed it and was amazed.
I learned that I need a power hammer lol Please keep the videos coming, good content/entertainment as well as information.
I found this very interesting well done.
I am really glad to see someone using rebar for tongs, there has been much debate about using this kind of steel for tongs. I'm with you Liam, use what you think works best and the purists and nay says can take a walk off a cliff. great video.
That's too much fun, I don't think I'd stop until I ran out of material.
Great video, and that is an awesome power hammer!
thanks for the video broski
That was amazing.
that was quick. awesome.
Cool video. Thanks for sharing. You working late! Saw it was dark outside.
Liam, when drawing out on the power hammer it will move metal quicker if you start at the end and move into the dies. Love your work mate. Greetings from Tasmania. Australia
Glenn Brown. What is the benefit of feeding it in vs pulling it through?
@@MrPatfindley hi mate. I find it makes the work go quicker. Lots of ways to skin a cat though. Each person finds what works best for them.
@@MrPatfindley The difference is firstly you a progressively working on a smaller area, think of it nibbling bit by bit. More importantly when you push in your work stays relatively parallel with pulling the work towards you it forms a taper. Yes, I know Liam is tapering the reins of his tongs, I would normally do this towards the latter end of the process. Get it hot and work the material down to size quickly and efficiently then do your final shaping and finishing.
Such a beast. Love that hammer.
You should grab some carpet remnants from a carpet store and hang them in your shop. It'll cut down on some of the ringing and remnants are cheap
Awesome information, thank you
Great video. Thanks for sharing. 👍🏼
Great video. Gratz in the new hammer. What size is it?
That hammer is a beast. I sure hope you have a good foundation under it. I'd hate to see it fall over after destroying the floor around it. Let is know, please, how it is mounted and how you went about making the floor strong enough for the long haul.
If you would make your "step" tool out of less thick material.... meaning the bottom of the step to bottom of tool is less... then when you do your second offset your jaw would bottom out on the die and everthing stays much straighter...... hope that makes sense... time saver and better results
what a handsome man! Looks classy in those glasses!!
I'm curious, as I know nothing about setting up a blacksmith's shop that includes a power hammer, but how does one go about determining the right floor thickness to withstand the 'vibration' of a power hammer? Does the power hammer manufacturer include specs? This workshop was built circa 1960 (as per Liam's previous comment). If it determined the floor/foundation isn't thick (strong) enough, how does one 'fix' this?
would be cool to see how you make a set by hand aswell :)
For only 3 weeks playing with a power hammer you're looking pretty good, by this time next year I bet you will look like you have been using a power hammer for all your life.
I have tried forging tongs from rebar several times but it keeps getting cracks all over the place. Tried forging really hot the whole way, tried forging at normal heat, no hits when it's red and ofcourse different pieces of rebar. One time when it was cold I saw all the cracks and just broke it in half with my hands BUT it made like a glass snapping sound and the fracture was blue. Not blue from the heat because it was the next day and it didn't have the look of the tempering color. Got some advice?
Can we get an info video on the hammer?
Me being an electrician ask,.....can you make pliers? Seems very similar to tongs?
How deep is the grove
Very Cool process Sir an have a Happy Halloween.
Can you do a video on making one of your mini pig/London anvils
good night my master.
I am from Brazil and I would like to know the measurements of your feedback for the tongs very show congratulations
Very cool
Great video liam and crew :-) when I make power hammer tongs I like to draw out all my reigns first then make the jaws last. I find this to be the most efficient for me and has the advantage of not having to mess around with trying to grip the tong jaw while drawing out the reins. Keep up the great work and awesome hammer by the way :-)
@@HoffmanBlacksmith96 your welcome man keep up the great work!
I hand hammer out tongs the same way - reins first. Never understood why people do it the other way then try and fumble with tongs, you're making a nice long handle for that complicated end.
Awesome. Liked. Subscribed. Superb.
Are you able to vary the strength of the blow or am I just imagining that?
I have a smaller anyang then his and you can go from just touching it to pounding the heck out of it
What are the dimensions of your tong tool?
Learned alot that's neet
i find it funny everyone commented about ear protection when you had it on the whole time...
Thats LOUD you need earplugs bud
@@HoffmanBlacksmith96 the dog might need some too
Could put some carpet on the walls or that pyramid foam like you see in a sound studio. But do wear ya plugs,...
Why is there smiley faces on your power hammer?
Is your dog named boba? Like after the tea?
Do you sell tongs
You deff need to put in a huge concrete sub floor for the monster. Go check out Brent Bailey videos he is awesome with his 250lbs little giant looking good good luck. ....Paul
Nice job. Hope you wear ear plugs. What did you say .lol
While watching I grabbed my ear protection. . . You should also. Your's have to be ringing like a son of a gun!
He is wearing ear protection
Your power hammer almost hits as hard as you lmao.
I find it ironic that you collect anvils, but dont seem to use them as much as a power hammer.
@Geoff Kuhn , Liam has only had the power hammer for about three weeks (as he mentioned), and he says he wants to learn more by using it....sorta like having a new toy, perhaps? I'm sure Liam will be using the anvils, too. He even mentioned in his "this is the new workshop" video he is acquiring even more anvils. The love is still there. 😍👍
Mild steel is perfectly fine for tongs. Some of the best tong makers out there use mild. It is probably the best material for beginners to use as less likely to fail/crack, etc.
Is that a Pilkington?
It's a ayang hammer. :-)
man, aren't your ears ringing after using the power hammer without hearing protection?? Especially in that big space... Pretty awesome though... Great video, take it easy...
@@HoffmanBlacksmith96 haha, right on...
Check out Roger Lund 's web site. he has a bunch of fascinating videos. his hammer is a lot bigger than yours, and the work is too.