I hate when people talk shit about how fast there car is online, BUT.... I had a 98 AODE non PI heads SN95 that went 11.87 at 114 mph with a vortec s trim with a 100 dry shot on Nitto Drag radials in 2001. All stock motor with stock plastic intake. Ran at Gulfport MS Drag way. I was asked to leave because at the time if you ran under 12.0 you needed a roll cage. It was a complete car. Nothing removed for racing. It was a tru 11second street car in 2001. 2Vs can run.
Many people have pushed up to mid 400s without issue at the tires in 2vs...it depends on supporting mods and most importantly a good tune. Everyone acts like coyotes can make 700-800 and they can but some die at 600 if they have a shit tune. 2vs are no different. No they wont make neat the power a coyote can on a stock motor but they're not this little fragile pos that is going to explode if it even sniffs 400 whp like everyone thinks. 450+ has been done many times reliably it depends on the tune the supporting mods and the owner and how they drive it etc. I love coyotes I love terminators I love gt500s all of em but these other stangs aren't as bad as some people make them out to be. These days people act like 10s and 11s is impossible in a 2v without dumping 10 grand into the engine building a short block...even 12s they act like its unusual...2vs aren't the cars we have today for sure but they certainly arent nearly as bad as people wanna make them out to be lol
Nice runs. Wow. Its cool to see a new edge run so well. I don't own one but I know a lot of guys do and its inspiring to see what these cars are capable of doing with a decent setup.
@@nickp.7156 he's not making enough power to go down in gearing to 3.55's. he doesn't road trip it and he trailers it to the track so 3.73's don't make sense. 4.10 is the logical choice for squeezing max ET out of it. Anything less is a choice for streetability. As for lowering his shift points. stock heads/cams run out of steam after 5800, without the turbo he would best be served shifting at 5600. He would need good springs, a good set turbo cams 540-550 245/238@.50 and 116/117ish LSA to spin any higher, and a solid porting job of the stock heads(fox lake could do it cheap). with those 3 upgrades he could spin to 6500 and should be pushing just over 500hp with the same boost
This was on a 26x11.5x15 MT Bias Ply. Bias ply tires do not user standard mm tire sizes. This car has also been faster than in this video. 10.7 @ 127 MPH
Don't know much about the On3 turbo kit, how much more boost can you squeeze out if it?? The additional boost and those 355 gears you talked about should definitely put it into the 10's. Nice video!!!
Try doing your burnout in second will get wheel speed up quite a bit. As soon as you get your suspension sorted you will be cutting 1.4 60s easily. Here is my 2v at the track. 1.46 60 at 6.90 @ 100mph ua-cam.com/video/nqbAXftyk6A/v-deo.html
Just throwing out some advice if I was you even your going to send it rev it out to about 6g that's what I was reving my 01 GT mild built 4.6L V8 to and I was running 11.10's I'm not bullshitting you just throwing you some advice you can except it or not just trying to help it a fellow mustang lover and mine wasn't even turbo'd no supercharger nothing just bolt on's
I hate when people talk shit about how fast there car is online, BUT.... I had a 98 AODE non PI heads SN95 that went 11.87 at 114 mph with a vortec s trim with a 100 dry shot on Nitto Drag radials in 2001. All stock motor with stock plastic intake. Ran at Gulfport MS Drag way. I was asked to leave because at the time if you ran under 12.0 you needed a roll cage. It was a complete car. Nothing removed for racing. It was a tru 11second street car in 2001. 2Vs can run.
Go try the mile events.
Congrats man
Sweet buddy
Nice driving!
Nice passes on the Bullitt.... cant wait to see the next changes.
Nice Builltt
Soon it will be knocking on the door of death!
A new engine is only a crown Vic away!
Mustang Lifestyle lol 😂
the 2v is beast it will last longer then you think
Many people have pushed up to mid 400s without issue at the tires in 2vs...it depends on supporting mods and most importantly a good tune. Everyone acts like coyotes can make 700-800 and they can but some die at 600 if they have a shit tune. 2vs are no different. No they wont make neat the power a coyote can on a stock motor but they're not this little fragile pos that is going to explode if it even sniffs 400 whp like everyone thinks. 450+ has been done many times reliably it depends on the tune the supporting mods and the owner and how they drive it etc. I love coyotes I love terminators I love gt500s all of em but these other stangs aren't as bad as some people make them out to be. These days people act like 10s and 11s is impossible in a 2v without dumping 10 grand into the engine building a short block...even 12s they act like its unusual...2vs aren't the cars we have today for sure but they certainly arent nearly as bad as people wanna make them out to be lol
Just add meth injection and crank the boost a bit and see what happens
You are having WAY too much fun!
Man Andrew awesome turbo bullitt you have! Keep up the great videos!!
What happened to Ashley and the s550
josh L. ive been wondering the same
She still around they just been working hard
Maybe hiding due to court stuff, for now.
She's on the down low
josh L. She was deported to mexico
Nice runs. Wow. Its cool to see a new edge run so well. I don't own one but I know a lot of guys do and its inspiring to see what these cars are capable of doing with a decent setup.
Mustang Scott76 I have a 2V doing a budget build right now should be around ~600whp for now for under $5000 all said and done
I cant beleive this motor has lasted this long! Long live the 2v!!!!
Simple setup and it WORKS! That lil 2v is impressive, bro. Way better than trudzilla.
Awesome job! Keep up the hard work.
Still love the bullit mustang it's very unique.
is clutch slipping? sounds wierd when you engage
Damm Turbo Bullitt 💪
When you have a sick high horse power cobra but you run a regular gt I know it's a bullit but that doesn't add power or handling
life with anxiety everyday the bullitt is turbocharged. He is selling the cobra for a 13/14 GT500.
And plus he bought the bullit for drag racing and hes selling the cobra for a 13-14 gt500
Did he mention that he's selling the cobra for a 13/14 GT500?
17:45 RIP headphone users
what are you shifting at? should run 4:10's and shift at 5800 with your setup.
Warfighter Racing on a turbo car?
@@nickp.7156 yup
@@nickp.7156 he's not making enough power to go down in gearing to 3.55's. he doesn't road trip it and he trailers it to the track so 3.73's don't make sense. 4.10 is the logical choice for squeezing max ET out of it. Anything less is a choice for streetability. As for lowering his shift points. stock heads/cams run out of steam after 5800, without the turbo he would best be served shifting at 5600. He would need good springs, a good set turbo cams 540-550 245/238@.50 and 116/117ish LSA to spin any higher, and a solid porting job of the stock heads(fox lake could do it cheap). with those 3 upgrades he could spin to 6500 and should be pushing just over 500hp with the same boost
Don’t ever start another sentence with “turbo bullitt is knocking...” scared the shit out of me 😂
I scrolled a good portion of the comments to see if anyone else had already asked but what size tire? 275/50/15 or 275/60/15?
This was on a 26x11.5x15 MT Bias Ply. Bias ply tires do not user standard mm tire sizes. This car has also been faster than in this video. 10.7 @ 127 MPH
@@MustangLifestyleTV Yea I've been watching all your videos for a few years now back when Scooter was still around, thanks for the info!
Whoa! Did I just see the stock Eaton on the cobra? Also where is Ashley and the S550?
Stock Eaton yes and Ashley has been taking a break from the channel
Where’s the White S550?
They still have it. Ash values her privacy and doesn’t really want to be in videos.
Do the mach 1 hood to the bullitt?
Anyone else see the stock blower on the terminator 😭
Talents What’s wrong with that?
Marathonrunner 97 means it’s getting sold soon
cay Oh damn why? If I had a Terminator I’d never sell it
@@alecscheerer_run pretty sure he wants a GT500
He cherishes turds no way I would ever touch that cobra soo pretty
Hell yeah dude, love the Bullitt content. I just got a FF on3 kit for my 98 cobra. I can't wait do see what it does at the track
Man I’m rooting for that bullit!
Don't know much about the On3 turbo kit, how much more boost can you squeeze out if it?? The additional boost and those 355 gears you talked about should definitely put it into the 10's. Nice video!!!
Hey dude what fuel pump is in the car or are you using a boost a pump ???
340lph
Throw a new or freshened up trans in it & let it launch bro! 🚀💯💪🏽
Trans actually would make a difference. It’s working fine just grinds third
TROY DUNCAN If it runs ok don’t mess with it!, until it breaks then make it stronger lol
Sounding good!
But NA coyotes are already in the mid 10s
Yooo what's up with the s550 it finally gets boosted then no vids?
Everyone hates on the 2v...
I want to turbo my c5😔
the sheer carnage of silicone on that underside is impressive.
It sounds weird when he’s shifting
Where’s Ashley
Got the win against that camaro.
Where’s Ashley? I haven’t seen her in your recent videos ! I deliver a lot in Florida and it would be awesome to meet you guys :)
Turn that boost up 👍🏼👍🏼👍🏼
That shifters slowing you down alot, I'd get something short throw
Time for a egr delete
That no lift shift is slowing you down a good bit. We saw over a tenth by turning that off.
Famous last words...do it 4 the u tube.
I almost threw up when I saw that copper mess
On3 gen 1 problems
@@MustangLifestyleTV CG Fab for the Fix
Who else seen the Turbo bullitt is knocking and got scared 😂😂😂😅
Yup!
Not yet! Needs more boost!
That 2nd to 3rd shift is way to early in my opinion
Way to end with a bang! haha!
Try second gear burnout.. Wheel speed is mo better for heating the tires...
WOW my 4v is jealous!😀
I know U don't want 2 break it...but.. Would love 2 see U just dump the clutch off the line.
Does it have rods in it or are you getting ready to blow the motor?
The 4.6 rods are about as strong as aldente pasta
Stock engine
Foo1ishfast Lmao
Please that motor wont last long. Coyote for the win.
Even if it does blow it’s cheaper then buying a coyote.
@@everyonewasstealingmynamea919 coyote would last longer anyway so wouldnt have to replace it for awhile
4.10 gears
Still need a driver mod
Daaaamn...got copper gastket maker lolol. Thats a bad ass et and mph man
Add a water methanol kit
Your about the only UA-camr that works on his own stuff and actually races his stuff.
Wut? You crazy man.
Definitely not. This must be the only channel you watch, lol
@@Alex-tp4gb Right?! haha. In his own bubble.
Apparently you have never watched Cleetus..
@@matth3993 ya I watch Cleetus but he's multi sponsored. Andrew is more close to me or you as far as life goes.
That’s not gonna be the only thing knocking soon ;)
Coyote can be a 10sec car then daily drive comfortably and drive a 1000miles. Bullit mustang not sure it can accomplish that. Not fair comparison.
Awesome job my friend you are headed in the right direction keep up the good work
Can you please buy a better trailer the stacked wood ramps are killing me lol Awsome videos!!!
Reaction time doesn't matter....I told em
Come on Andrew, Bullitt is boosted and other mods, not a fair comparison to a Coyote, stop the click bait...
S550 WULF seems reasonable to me considering a new coyote is 30-40k and you can do all that to a 2v mustang for like 8k or even less
S550 WULF a bullitt isn’t really special like a mach 1 was it’s just a 2v lol..
It literally says everything in the title, how is that click bait? 😂
@@everyonewasstealingmynamea919 whaaaaaaaat dude?!?? Mach 1s have a 4v and they're pretty desirable cars to say the least.
Try doing your burnout in second will get wheel speed up quite a bit. As soon as you get your suspension sorted you will be cutting 1.4 60s easily.
Here is my 2v at the track. 1.46 60 at 6.90 @ 100mph
ua-cam.com/video/nqbAXftyk6A/v-deo.html
What happened to Camaro lifestyle where Are they at chicken chickens lol jk
U got slow reaction time
Just throwing out some advice if I was you even your going to send it rev it out to about 6g that's what I was reving my 01 GT mild built 4.6L V8 to and I was running 11.10's I'm not bullshitting you just throwing you some advice you can except it or not just trying to help it a fellow mustang lover and mine wasn't even turbo'd no supercharger nothing just bolt on's
Here
Good Times , and all with a janky 3rd gear
360p gang wya?
No where
Lmfao
Ford
Fastest.
On.
Race.
Day.
Amber tail lights on the bullitt from the cobra 🤔
Erik02GT nah I think it’s had those. Could be wrong though
Marshall Greenwood he took them off the cobra
Early
woot!
Videos are so cringe worthy
first