I know it's been a while but these are very good machines, well suited to the task of machining hard materials (Werkzeugstahl=tool steel). The C version which is made for tool room use can be switched from vertical to horizontal with a push of a button. This machine has an extensible robotic tool changer.
Hi, those Maho were good and stable Maschines; the 400/500/600/800 Line had a dovetail X- Axis, and the table was "hanging" on it. So the table and the workpiece could hang a little bit, if the guidings werent fresh. The spindles were solid and strong, but not very fast (5000-6000 1/min). Most of them could swing the Spindle Head (vertikal) by the side, so you got a very good horizontal Maschine. The Pillips 432 millplus was one of the better iso code controls. Weak spots were the Heidenhain scales, when they got dirty.
hey servus ist das ganze mit hand gecodet? oder nehmt ihr /nimmst du dafür extra ein cam programm, die kontur bei 4:40 sieht so aus als ob du sie mit solidworks oder autodesk fusion vorgecodet hättest, wenn nicht hut ab ;) da ich in naher zukunft in den cnc bereich einsteigen werde, wollte ich noch fragen ob du die vorschub /drehzahlwerte nach hersteller angaben berechnest oder nimmst du da "erfahrungswerte"?
grundsätzlich sollte man sich an die Richtwerte von Herstellern halten. Wichtig ist aber, dass es nur Richtwerte sind, die nicht immer funktionieren müssen. Bei Fraisa zB sollte man sich auf die Werte verlassen können.
@@westsidetillidieog dann heisst der Parameter halt "E" und nicht Q, ist trotzdem ein paraprogramm (hätt ich jedenfalls vor 15 oder was wiess ich wieviel jahren noch so gemacht) die 432er steuerung war damals besser als Haidenhein Steuerung
+Cobrass2 depends on many things... if u learned it and work with the right company then it can go around 6000€ netto each month, also if u go abroud u may get more
+Michaa1223 Wish i knew german, i make 1200Netto In Estonia, wich is kinda low compared to many other EU countries.. Wish to find a company some day with only english knowlage. Most parts we make here go for Finland Sweden and Norr
@@TimeWaveOfficial bei Massen Fertigung in der Industrie, also Programmierung von Prozess optimierten Maschinen ist das drin. Mit auslandseinsätzen, viel Luft noch oben gibt's immer.
Ah die Maho würd mir noch in meiner Werkstatt fehlen... Viele Grüße Nico von Nico's Projects
is Maho any good? you have to manually change tools?
I know it's been a while but these are very good machines, well suited to the task of machining hard materials (Werkzeugstahl=tool steel). The C version which is made for tool room use can be switched from vertical to horizontal with a push of a button. This machine has an extensible robotic tool changer.
Hi, those Maho were good and stable Maschines; the 400/500/600/800 Line had a dovetail X- Axis, and the table was "hanging" on it. So the table and the workpiece could hang a little bit, if the guidings werent fresh. The spindles were solid and strong, but not very fast (5000-6000 1/min). Most of them could swing the Spindle Head (vertikal) by the side, so you got a very good horizontal Maschine. The Pillips 432 millplus was one of the better iso code controls. Weak spots were the Heidenhain scales, when they got dirty.
hey servus ist das ganze mit hand gecodet? oder nehmt ihr /nimmst du dafür extra ein cam programm, die kontur bei 4:40 sieht so aus als ob du sie mit solidworks oder autodesk fusion vorgecodet hättest, wenn nicht hut ab ;) da ich in naher zukunft in den cnc bereich einsteigen werde, wollte ich noch fragen ob du die vorschub /drehzahlwerte nach hersteller angaben berechnest oder nimmst du da "erfahrungswerte"?
grundsätzlich sollte man sich an die Richtwerte von Herstellern halten. Wichtig ist aber, dass es nur Richtwerte sind, die nicht immer funktionieren müssen. Bei Fraisa zB sollte man sich auf die Werte verlassen können.
das bei 4:40 ist mit Q Parameter programmen möglich. Man kann Halbkugeln fräsen, radien und noch viel mehr
@@ipadize ist ne phillips keine heidenhain Steuerung. Das bei 4:40 ist einfach eine Wiederholfunktion.
@@westsidetillidieog dann heisst der Parameter halt "E" und nicht Q, ist trotzdem ein paraprogramm (hätt ich jedenfalls vor 15 oder was wiess ich wieviel jahren noch so gemacht)
die 432er steuerung war damals besser als Haidenhein Steuerung
schönes ding... was haste da gebaut?
are you using this maho at home ? or at business?
How much money does a CNC machinist make in Germany?
+Cobrass2 depends on many things... if u learned it and work with the right company then it can go around 6000€ netto each month, also if u go abroud u may get more
+Michaa1223 Wish i knew german, i make 1200Netto In Estonia, wich is kinda low compared to many other EU countries.. Wish to find a company some day with only english knowlage. Most parts we make here go for Finland Sweden and Norr
6000€ netto is a bit of a stretch. If you work in a shitty company you can also only make 1200 netto in Germany.
@@Michaa1223 wo bist du denn angestellt? ich verdien das 1/3 davon xD
@@TimeWaveOfficial bei Massen Fertigung in der Industrie, also Programmierung von Prozess optimierten Maschinen ist das drin. Mit auslandseinsätzen, viel Luft noch oben gibt's immer.
Me podrían ayudar a resolver un error
i could've g coded that for you no problem why didn't you email me first