Our flapping /banging sound at over 50 mph was a mystery. At first I thought I'd picked up a bag on the road. Nah not that. Took it to a garage and put it up on the ramp. Thought something was loose. Not that either. Then I looked at the aerial thing on the roof at the rear - the plastic covering was coming off and I figured it was picking up the wind. Sure enough we took it off leaving the metal aerial and problem solved. I went out on the highway today and the flapping/banging has gone. Yay! I'm a genius.😂
my noise was actually starter related..somehow when i made a right turn,something was contacting an electrical component..eventually the noise was constant and the starter just went dead
Improper assessment. Driving over bad roads and checking steering noise by moving to either side. Removing link rods checking for wear. Shruts n mounts sound comes when u drive over road humps and while landing steer to right or left fully you will know the shruts conditions also top mount bearings will make cluck noise with the unsprung Weight... other control arms can be checked for ply easily after removing. Same with ball joints.
Would he nice if you included the clicking sound
Right?!?
Nice video, add the sound so we can compare it with our car sound💪🔥
Noted, thank you for watching.
Our flapping /banging sound at over 50 mph was a mystery. At first I thought I'd picked up a bag on the road. Nah not that. Took it to a garage and put it up on the ramp. Thought something was loose. Not that either. Then I looked at the aerial thing on the roof at the rear - the plastic covering was coming off and I figured it was picking up the wind. Sure enough we took it off leaving the metal aerial and problem solved. I went out on the highway today and the flapping/banging has gone. Yay! I'm a genius.😂
Got Hyundai ionic hybrid recently found a clicking noise at pulling and breaking!! Any advice would be appreciated thank you
Too much! I'm gonna take a bus from now on
What undercarriage parts are rusty at 1:35 ?
my noise was actually starter related..somehow when i made a right turn,something was contacting an electrical component..eventually the noise was constant and the starter just went dead
Tie rod ends ... .
You helped it was the bearings
So it can be all that great 😢
mine ended up being the wheel out of alignment
Improper assessment. Driving over bad roads and checking steering noise by moving to either side. Removing link rods checking for wear. Shruts n mounts sound comes when u drive over road humps and while landing steer to right or left fully you will know the shruts conditions also top mount bearings will make cluck noise with the unsprung Weight... other control arms can be checked for ply easily after removing. Same with ball joints.
🙄
Well that's your opinion.