Congratulations . Many people makes this type electric/electronic Products and posted their UA-cam videos, very some only like you are presented like this type, without dialogue, as a universal class
Brother, it's not recommended to charge 3 lithium batteries 3.7v with 1 TP4056 charging module. Because It only support 1 to 1.5 amp and only made to charge 1 battery at a time. Charging 3 battery at once, it's IC will regulary heat up everytime and soon it's performance and life will shorten. You can connect 2 TP4056 module in parellel and charge 3 batteries.
Agree TP4056 Module (Best for Single-cell Lithium Charging) Why it's suitable: The TP4056 is specifically designed to charge 3.7V single-cell lithium batteries. It’s easy to use, compact, and includes all the essential protections. Features: Input Voltage: 5V (USB, micro-USB, or Type-C input). Output Voltage: Charges a 3.7V Li-ion battery up to 4.2V (fully charged voltage). Built-in Protection: Overcharge, over-discharge, and short-circuit protection.
I made something similar but a lot simpler. I have a light that the 3 LED arrays have been modified to be in parallel so they run on just under 12 volts and I have it mounted with a golf tee to an 8 AA battery holder and switch and 9v connector. Works great and is very bright.
Ive made this project with 12v system. Using ACCU 12v instead of battery 3.7v. And replacing tp4056 with Scc pwm controller. An of course we need 19v 1a solar panel. Iam using 30w lamp led modified to 12v system. Its very usefull. Nice video
Great DIY tutorial video! Inspires me to make one myself. Thanks! Just one question, tho... When battery is fully charged, how long can that 10w led light stay on?
nice with 12v led just using step up. no need to calculate resistance. this is simpel guid for newbie. but with 3 paralel 18650 battery, how many long can supply the led?
Very neat & clean work.... Loved it.... you can make 2s battery set and use one BMS.... I think that would be lesser cost than the TP4056 charging module and DC-DC buck booster..... though it is very good....
using a step up, will that not use the power up more, ie, less light time, before you have to re-charge again, I am new to this and trying to make my own led light
What a wonderful technique! Wonderful workmanship? Thanks thanks. Please inform the battery name, volts and Amps. Instead of those batteries, which battery may be used? Where can I purchase those circuit boards? Please reply.
Material Links and Circuit diagrams available in the video description
Don't forget to Like, Share and Subscribe
Thank you for watching ...!! 🙏😊😊
Thanks bro keep it up good work
Bhai apke pass green card board graph jaisa sheet he uska nam kya he plz bataiye jespar aap video banate he
@@coronadanger818 Cutting Mat bolte he bhai use ( link - amzn.to/3lGFq6e )
@@28xhbayushkumar37 bhai ache videos dalo viewers apne aap subscribe karege
Solo español
perfect video if you don't understand that you don't understand anything in life, excellent congratulations to whoever did it
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
Congratulations . Many people makes this type electric/electronic Products and posted their UA-cam videos, very some only like you are presented like this type, without dialogue, as a universal class
Eeeŕrtytui
This kind of product is available on market but without dc to dc step module and 18650 battery,their battery are cheap one. Nice job👍
Thank you🙂
Excellent work @@CreativeHome
👎👎👎👎👎👎👎👎👎
Best emergency light 👍keep it up 🇮🇳🇮🇳🇮🇳
Thank you 😊🤗🤗
Brother, it's not recommended to charge 3 lithium batteries 3.7v with 1 TP4056 charging module. Because It only support 1 to 1.5 amp and only made to charge 1 battery at a time.
Charging 3 battery at once, it's IC will regulary heat up everytime and soon it's performance and life will shorten. You can connect 2 TP4056 module in parellel and charge 3 batteries.
Agree
TP4056 Module (Best for Single-cell Lithium Charging)
Why it's suitable: The TP4056 is specifically designed to charge 3.7V single-cell lithium batteries. It’s easy to use, compact, and includes all the essential protections.
Features:
Input Voltage: 5V (USB, micro-USB, or Type-C input).
Output Voltage: Charges a 3.7V Li-ion battery up to 4.2V (fully charged voltage).
Built-in Protection: Overcharge, over-discharge, and short-circuit protection.
Good job bro
Great Yar bohat mehnat ki h zabardast
Thank you 😊
Welcome g
Very Nice & Number One For You ❤❤❤❤.
I made something similar but a lot simpler. I have a light that the 3 LED arrays have been modified to be in parallel so they run on just under 12 volts and I have it mounted with a golf tee to an 8 AA battery holder and switch and 9v connector. Works great and is very bright.
Here's a video of the light I made. Kind of crude but it works.
ua-cam.com/video/QjibhqSehXs/v-deo.html
DC-DC 💡💡🥰🥰
zw is 20
59 to…
ok…
23…
..
PililkliliiiljgF
Good job
Nice finishing
Bhaya,ekdum neet and clean kaam kiyo, tools or spares parts management khub bhadiya maja agayo.👏
Thank you 😊
vai darun hoyse
Very neatness.... 👍🏻💞
Thank you..!!😊
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
Ive made this project with 12v system. Using ACCU 12v instead of battery 3.7v. And replacing tp4056 with Scc pwm controller. An of course we need 19v 1a solar panel. Iam using 30w lamp led modified to 12v system. Its very usefull.
Nice video
آفرین واقعا خوبه اختراع جالبی کردی منم مثل تو دانشمندم چیز میسازم ساعتی ساختم
Hasilnya bagus buatnya simple dan manfaat dan tidak kalah dengan produk pabrikan ini sangat rapi kalau sudah jadi berapa.
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
Great DIY tutorial video! Inspires me to make one myself. Thanks! Just one question, tho...
When battery is fully charged, how long can that 10w led light stay on?
Maybe (for a 3000mAh battery) it could last up to 12 hours, I guess.
Osadaron ok lait🤩
GOOD VERY VERY SUPPER THANK YOU
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
iam your big fan
Thank you 😊
can you give your whatsup or face book
plsss
Ammajing and background music very good thanks...
nice with 12v led just using step up. no need to calculate resistance. this is simpel guid for newbie.
but with 3 paralel 18650 battery, how many long can supply the led?
Super 👌👌 bro
Thank you 😊
Nice created lamp thanks for your demo.👌👌👌
Thank you..!!😊
خی
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
Great and exilent project bro so my like all ways ready for your videos🤗🤗🤗🤗🤗🤗😀😀😄😄😉😉😉
Thank you so much 😊
एकच नंबर भावा
धन्यवाद भावा 😊
Very neat & clean work.... Loved it.... you can make 2s battery set and use one BMS.... I think that would be lesser cost than the TP4056 charging module and DC-DC buck booster..... though it is very good....
Thank you for your appreciation and suggestions😊👍
Without bms module it will ages to charge
و عليكم السلام و رحمة الله
؟😂🎉😢😮😅😊
Very good. The step up voltage module is not taking load after few minute.
😮ؤلليبڢ🎉يلشنت٠خ
very very & very good work.
Thank you so much..!!😊
Super sir
Thank you 😊
Nice job
Bht zabardast... Great Effort...😊
Thank you 😊
Bro please tell me the cost of that plastic box your work is very neat and professional
20 rupee
Thank you😊
@@CreativeHomeThank you so much bro for your fast reply hope your channel will receive 1lakh subscribers soon...
Very nice innovative ideas bhai ❤❤❤❤
Уулклкклклклкл😂😂😂Того 😂😂😂😂😂😂да
Good idea bro it is like a factory product. 🙏🙏👍❤️❤️❤️
Thank you 😊
@@CreativeHome welcome
Bhai very nice👏👏👏
Thank you 😊
using a step up, will that not use the power up more, ie, less light time, before you have to re-charge again, I am new to this and trying to make my own led light
Wow what's a idea! Great job
Thank you 😊
Good job goo finishing
Thank you 😊
Grate job 👍
Thank you 😊
Bahi I am a first viewr of your video
😊👍
@@CreativeHome hii
Super mind 👍
Thank you 😊
Nice video sir
Thank you 😊
excellent work.short and sweet
Very nice and clean
Mikro usb ny yg sdh ada kabel ny beli dmn tuh??
Using same module charging for 2 baterry module get hotter not like charging for 1 battery, is it safe?
Don't worry, you can use 2 batteries in parallel
( Make sure they have the same voltage and capacity)
very nice sirji
sirji why r u not selling such types of products?very good products...
@@imsunilscakole Thank you so much 😊😊
Don't have time to make a product for selling but in the future, I will try and thank you for your suggestion
So good 🙏
Thanks 😊
कौन कोन इस तिरंगे 🇮🇳👈 को लाइक करेगा
👇
👇
Cool!
You are great 👍
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
very nice I like it
Thank you..!!😊
Awesome... thanks for the video.
Thank you..!!😊
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
Very nicely done.very clean work surface & wiring.keep up the great work.
Thank you 😊
Super bro well done.18650 battery how much in one piece online or offline.
Very talented channel
Thank you 😊
Very nice Sir
Thank you 😊
Very nicely done
Thank you😊
BAH BHAI , YOU ARE SO GREAT ENGINEER.,
Thank You😊
SUPPERB SIR 🌹👍👍🙏👌👌🌹
Thanks 😊
Welcome 🌹😊🌹
Superb 💯
Thank you 😊
Bro very super
ua-cam.com/video/FTU5y6ZxuR8/v-deo.html
Nice videos
Thank you 😊
Nice video bro
Thank you😊
good project
Thank you 😊
Nice video
Thank you 😊
Really amazing idea
Thank you 😊
Best video👍
Good ide ...mantappp
Super , congrats !
Josss mbahh
It's a amazing 👍
Thanks a lot 😊
Good lamp emergency
Thank you 😊
Good job sirr
In my home i need some ideas
This is raining season
Thank you 😊
thank u now my room is bright when electric die. 😀👍
keep it up bro.i like your making style
Thank you 😊
What component would I need to charge from 240v to 3.6v?
What a wonderful technique! Wonderful workmanship? Thanks thanks. Please inform the battery name, volts and Amps. Instead of those batteries, which battery may be used? Where can I purchase those circuit boards? Please reply.
Thank you so much 😊
I have used 18650 battery ( 3.7 Volt 2000 mAh )
Circuit boards links available in the description
What If we do battery connection in series ? Please reply.
BTW very nice video.👍
Good, from indonesia
Nice idea
Thank you 😊
Cara parabéns! Adorei e admirei sua ideia ,seu capricho e sua paciência! Top
Tkdpdo
Amazing Idia bro 😂🤩😻👍😊 .
Thank you bro 😊
Your channel is best for alive 👍☺️
Plz make a video on how do you organize your components and tools 🙏🙏🙏🙏🙏🙏🙏 plz
👍
NICE DEAR BRO AND LOVE YOU FROM LIFE WORKS UA-cam CHANNEL 💟🙏
Thank you 😊
@@CreativeHome YOU ARE WELCOME BRO
Good job ,,i like it ...
Awesome project 👌 . Make a video on emergency led tubelight which is automatically turns on when electricity gone
okay 👍
Thank you😊
Very nice
Thanks 😊
Vaiya app konsa glue istamaal kar rahe ho.???
Your project is so good and I am the new subscriber......
Thank you 😊
And I m also your new subscribers
What is its backup when continuously work?
bro were you buy otg connector port like that.
Very good Idea, knowledge 👍
Awesome
Thanks 😊
Good job.... how if I want to make it auto on/off emergency light
will the charging module gets too hot or overload since it has to work overtime to charge 3 pcs of 16850 battery in parallel.
no
it just charge them slow
Keep it up... Good light
Thank you 😊