Note 18v Bosch batteries do not have undervoltage protection build in the battery, undervoltage is handel by the tool, building this light and running the battery to low will with 100% certainty permanently dammage the battery, even only once will leave its mark.
Good Job! :D I allways use the Makita 18Volt standard which is widely spreaded and you get all kind of fairly good knock off tools, adapters, chargers, Battery housings, BMS boards for good prices. This Makita 18V standard will last forever, unless all others which are constantely changing and meanwile all have chips which make it difficult or impossible to renew the 18650 cells by your self.
@@gear_show Thank YOU! : ) , I will make a similar Flaslight as you, but with a 72W three wire round LED spot, which have a yellow round ring LED and white LED's in the middle (xinled 4 inch 72w) and switch them separately with two switches. This way I have a energy save mode with nice yellow light and a bright mode with the others.
Soon I will have to work in the basement of a multi-storey building. And I would really need a good, long-working flashlight. And you have a great job again. Can you try to make a headlamp with your own hands next time? It would be interesting to see this. P.S: I hope that the translator will not spoil the text. 😅
у него на всех самоделках одна проблемма- нет защиты от глубокого разряда ( он убивает литиевые аккумы) у бош, макита, девалт,- защита стоит не в аккуме, а в инструменте, здесь же ее вообще нет нигде. Короче когда поймешь что аккум сел и фонарь светит тускло -будет уже поздновато.
Здравствуйте, работа класс, но есть одно " Но" ,это ручка слишком длинная, если вдруг нужно будет поставить фонарик в вертикальном положении, то ручка мешать будет! Её можно сделать в вровень с аккумулятором!!! Привет из Украины!!!
у него на всех самоделках одна проблемма- нет защиты от глубокого разряда ( он убивает литиевые аккумы) у бош, макита, девалт,- защита стоит не в аккуме, а в инструменте, здесь же ее вообще нет нигде. Короче когда поймешь что аккум сел и фонарь светит тускло -будет уже поздновато.
@@mraksnajper8683 Делал фонарь из бош аккумуляторов, 14.4в Шурик упал и разбился, а акуумы остались, да защиты от разряда нет, как и во всех остальных, и нет в самом шурике, работает до победного, фонарь светит тоже, и пока работают при чем им уже почти 10 лет, на 18в щеточном боше есть защита от разряда, на новом 12в безщеточном нет, во всех моделях по разному, есть много разного инструмента бош, а вот переходник интересен, и когда фонарь делал крепление аккумулятора взял с того же шуруповерта, с таким же было-бы намного аккуратнее.
@@ИгорьМочалин-к8й уважаемый, нету защиты ни у 12 ни у 14 ни у 18. в основном у всех брендов, защита от разряда стоит в инструменте Могу фото платы своего аккума боша отправить , как раз планирую замену ячеек)
@@mraksnajper8683 У бош gsr 180li защита точно есть, ибо он не крутит на дохлом аккуме, и моргает диод, у 12v30 и 18v110 нет крутят до победного, только защита от перегрузки, я к тому что на фонаре 14в работают, возможно я их так сильно не разряжал, поэтому и живут, также есть сабельная пила тоже нет защиты, а вот у ушм и гайковерта есть,
@@ИгорьМочалин-к8й прочитайте внимательно всю ветку комментов- вы подтвердили то , что было написано ранее- защита от разряда реализована в самом инструменте , в аккумуляторах ее нет, потому родной инструмент не работает от дохлых аккумов, а самоделки высаживают в ноль.
I love the video up to the point where you’re building the flashlight part you basically got a store-bought battery I would’ve re-purposed some old antique flashlight by putting some New Age parts inside it would’ve been cool to use an old brass fresh light other than that great video
Maybe you have an idea how to resurrect the Makita battery, which has a chip that prevents the battery from being recharged after a certain number of use cycles, even though the batteries are still functional. They do this supposedly for security reasons, although everyone knows that it's really about maximizing the company's profits. Do you have any way to solve this problem???
Cool project! It would be great if you could publish a parts list or even a short writeup on Instructables, because I'm surely not the only one who wants to build one of these lamps himself.
Very well done but I have an issue with the illegal branding.. really. Despite it could be considered as an honour to be copied, it is a clear mis-usage of this company brand. In my country it would be very expensive.
i actually really like the idea of the one with the electrical box on it . inspirational build . nice work .
Such a simple construction yet so bright an universal. Nice job there, keep it up!
Thank you! I will do.
0:36
@@gear_show
snd4nn$nrnfnznfhjfhhdh$$jfjw
I'm a viewer from Indonesia, always there for your every video!
Excellent Job brother. Love this ...
Watching here in Papua New Guinea
This is great job sir nice and neat torch 🔦 you build
Wow Amazing thanks for sharing sir.
Excellent tutorial for the battery pack and awesome idea with the flashlight :)
Another fine one, Mr. Gear Show! Thank you!
You're welcome, thanks
Ad to
Another quality product from “Small Fart Child”.
i enjoy your videos. Wishing a Happy Holiday season
Happy holidays!
No:1 torch light in the world.
Merry XMas !!!
Merry christmas!
Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦
This is so cool. How fun it could be to use copper pipe fittings and make a steampunk version.
You have a nice idea, thank you for sharing!
Great job, thank you brother. You are so talented
The "small fart child" cracked me up😂😂😂😂
nice👍👍👌👌
Thanks
You should have put a strobe/flashing warning for anyone who is epileptic and flashing lights triggers their seizers.
Nice build by the way.
Yes, you're right, thank you for sharing!
Note 18v Bosch batteries do not have undervoltage protection build in the battery, undervoltage is handel by the tool, building this light and running the battery to low will with 100% certainty permanently dammage the battery, even only once will leave its mark.
Okay, I noted that, thank you so much for sharing!
May be add a magnet sheet battery case'sbottom side for metal base
Great job like all others
Good Job! :D I allways use the Makita 18Volt standard which is widely spreaded and you get all kind of fairly good knock off tools, adapters, chargers, Battery housings, BMS boards for good prices. This Makita 18V standard will last forever, unless all others which are constantely changing and meanwile all have chips which make it difficult or impossible to renew the 18650 cells by your self.
Thanks for the tips!
@@gear_show Thank YOU! : ) , I will make a similar Flaslight as you, but with a 72W three wire round LED spot, which have a yellow round ring LED and white LED's in the middle (xinled 4 inch 72w) and switch them separately with two switches. This way I have a energy save mode with nice yellow light and a bright mode with the others.
Superb job done 👌👌👌
You could add a fm radio :3
Merry Christmas Guys
Soon I will have to work in the basement of a multi-storey building. And I would really need a good, long-working flashlight.
And you have a great job again. Can you try to make a headlamp with your own hands next time? It would be interesting to see this.
P.S: I hope that the translator will not spoil the text. 😅
у него на всех самоделках одна проблемма- нет защиты от глубокого разряда ( он убивает литиевые аккумы) у бош, макита, девалт,- защита стоит не в аккуме, а в инструменте, здесь же ее вообще нет нигде. Короче когда поймешь что аккум сел и фонарь светит тускло -будет уже поздновато.
@@mraksnajper8683 Я уверен, что его аккумуляторы всё равно будут работать гораздо лучше и дольше, чем любые дешёвые в магазинах моего города.
Did that box say "small fart child" ?😂
It says that. :)
Only light I trust
Maybe foreign don’t understand what “cut the cheese” mean! 😂🤣😂🤣
小P孩
In Russian, "fart" from the slang (thieves') translation means "luck". But I don't think the flashlight manufacturer knows about it. 🤣
I think big brands they will start offering that light adapter for their batteries boxes.
hey mr gear show, can you make a video on how to make a diy spot welder?
0:04 thats a one dangerous toy 😈
Please make more videos about how make cordless rotary hammer drill from corded
What process/materials do you use to make the replica decals you put on your work?
Soon his whole house will be powered by those rechargable batteries xD
Good job mister well done
Thank you!
Лучший спасибо за потраченное время!!!
Здравствуйте, работа класс, но есть одно " Но" ,это ручка слишком длинная, если вдруг нужно будет поставить фонарик в вертикальном положении, то ручка мешать будет! Её можно сделать в вровень с аккумулятором!!! Привет из Украины!!!
у него на всех самоделках одна проблемма- нет защиты от глубокого разряда ( он убивает литиевые аккумы) у бош, макита, девалт,- защита стоит не в аккуме, а в инструменте, здесь же ее вообще нет нигде. Короче когда поймешь что аккум сел и фонарь светит тускло -будет уже поздновато.
@@mraksnajper8683 Делал фонарь из бош аккумуляторов, 14.4в Шурик упал и разбился, а акуумы остались, да защиты от разряда нет, как и во всех остальных, и нет в самом шурике, работает до победного, фонарь светит тоже, и пока работают при чем им уже почти 10 лет, на 18в щеточном боше есть защита от разряда, на новом 12в безщеточном нет, во всех моделях по разному, есть много разного инструмента бош, а вот переходник интересен, и когда фонарь делал крепление аккумулятора взял с того же шуруповерта, с таким же было-бы намного аккуратнее.
@@ИгорьМочалин-к8й уважаемый, нету защиты ни у 12 ни у 14 ни у 18. в основном у всех брендов, защита от разряда стоит в инструменте Могу фото платы своего аккума боша отправить , как раз планирую замену ячеек)
@@mraksnajper8683 У бош gsr 180li защита точно есть, ибо он не крутит на дохлом аккуме, и моргает диод, у 12v30 и 18v110 нет крутят до победного, только защита от перегрузки, я к тому что на фонаре 14в работают, возможно я их так сильно не разряжал, поэтому и живут, также есть сабельная пила тоже нет защиты, а вот у ушм и гайковерта есть,
@@ИгорьМочалин-к8й прочитайте внимательно всю ветку комментов- вы подтвердили то , что было написано ранее- защита от разряда реализована в самом инструменте , в аккумуляторах ее нет, потому родной инструмент не работает от дохлых аккумов, а самоделки высаживают в ноль.
I love the video up to the point where you’re building the flashlight part you basically got a store-bought battery I would’ve re-purposed some old antique flashlight by putting some New Age parts inside it would’ve been cool to use an old brass fresh light other than that great video
amigo Excelente tus ideas sigue produciendo . saludos ✨✨✨✨✨✨✨✨
Good job
Thank you so much ❤️
Where did you get that knife I would love to get my hands on one
I made a similar one... Good work!
Having Bosch Battery
How about restorating Bosch Cordless 18V Tools
Wow nice good job I really like this video please sent me this one keep it up bro thank you 😊
Maybe you have an idea how to resurrect the Makita battery, which has a chip that prevents the battery from being recharged after a certain number of use cycles, even though the batteries are still functional. They do this supposedly for security reasons, although everyone knows that it's really about maximizing the company's profits.
Do you have any way to solve this problem???
C’est excellent pour l’explication 👍
Hi, Excellent Idea. can ask what the part number is that fits on top of the battery body , Many Thanks Ben
Great powerful light. Did you use the 21865 or similar in the light?
Отличная работа.👍💯
Very enterprising
i have bosch grinder gws 20-180 angle grinder,i want find lebeling new sticker,can you suggest to find sticker
It is illegal to deal with branded stickers.
Cool project! It would be great if you could publish a parts list or even a short writeup on Instructables, because I'm surely not the only one who wants to build one of these lamps himself.
😭😭😭😭
Genial, excelente idea maestro 😎🤙
I'm glad you like it. thank you!
Wow comgratulation
Cool!
Does the lamp brand name is "Small Fart Child"? LOL!
Like the one you use
The adaptor for battery from where did you buy?
Another great video 👍🏼
Glad you enjoyed it
Excellent Job
felicitaciones muy buen trabajo...........saludos desde ecuador
could be added in usb output to use on different devices
This has already happened, a repeat of the video!
What is the model of that wire striper?
A nice flashlight just doesn't have protection against excessive battery discharge ☹
I think the battery PCB will handle about this.
@@gear_show would be nice if you could test it? If one of the batterys are low voltage if the bms shut off the output?
Please use it more often the Makita M640D in your next video
Obrigado pelo ótimo vídeo
22😂wawzz, zzz,,, z
Nicely done 👍👍
Cool project!
So in Japan power scenario is very bad that you need 3 of those.
are you in Thailand? You're using SCG pipes
В хозяйстве пригодится! )
Вы правы, я использую его на ферме каждый раз.
😀👍📸👌👆
Super creative! Good day!
Thank you very much
@@gear_show
You're very welcome! I wish you and everyone a nice day and a pleasant weekend, also in strength, health and peace! Good luck!
V😀📸👌👆
Does this kit include over-discharge protection?
I think BMS inside the battery does that already.
Regulated by the PCB.
ऐ टाच॔ कौनशी कंपनी की है कहा मीलेगी कीमत क्या है टाच॔ अच्छी लग रही है याद से बताईऐ सर
Awesome bro
Hi, great idea, I am about to build a couple of lights myself for a different brand 18v battery system. What size pipe fittings did you use?
Hi, thank you! I use 27 mm pipe.
Salut r genială aș vre să cumpăr una cî ar costa dacă este dr vînzare
Hola tienes algún video de tu extractor
can you make vacum cleaner 12v
Could you please give me the link of these products?
Lumen ?
I hope it doesn’t smell when you use it.
This headlight voltage is 12V to 90V, and design for motorbike, the case is aluminum. I think it won't smell.
@@gear_show
Sorry, I was referencing the “Small Fart Child”.
donde compran esos kit para armar uno mismo?
Very well done but I have an issue with the illegal branding.. really. Despite it could be considered as an honour to be copied, it is a clear mis-usage of this company brand. In my country it would be very expensive.
There’s nothing illegal about it. You must be a child in the mind.
@@reginaldbowls7180 you have no clue about brand infringement..
@@Kazar2020 stay home
Good..asempley
Verynice
சூப்பர்...சூப்பர்
sei molto bravo ma in aggiunta potresti mettere i linght dove li vendono gli accessori grazie attendo notizie
I just want to know why it says "Small fart child" on the side of the the box that the L.E.D comes out of hahahaha
Please share link buy flashlight
Where did you source this DIY kit?
Hi sir, you find them on aliexpress Adapter t.ly/nIAS LED store t.ly/ipso Bosch battery t.ly/7mqW
Boleh,earth connector ,put end connector with 0006:AN
It’s perfect
Where can I buy the kit on the battery?
Found it. Bosch 18V Battery Power Adapter Kit
Bom dia mande uma dessa pra mim gostei muito você é gênios
Exellent
How are you sir
What is the name of the rubber you put on the grip? Or how do I look for it on the internet?
Looks like a bicycle handlebar grip.
No one even mentioned the small fart child😂😂?, But yea cool idea looks great to.
Уже и до фонарика добрался
Nice
Интересно смотреть. Как всегда лайк
Рада что тебе понравилось.