You've covered suspension tips, swapped the wheel, now please give us an insight on wheel alignment for every type of surface (snow, hard/sandy/rutted gravel, dry/wet tarmac...).🙏 Hats off for the rally2/Paddon series, loving it!👍
@HMSGOfficial my favorite is about using the handbrake, but i also really liked the videos about the difference between a road mod and a stage mod and about suspension
@HMSGOfficial yes they are also very cool and useful, as a former competitor I know what it is about but they are super useful and bring people closer to things
Ask EP and Janne again. The time the had at the blindfold Challenge was mindblowing. And Thierrys time in Japan where Seb was impressed. I think i can not do this in time.
The blindfold challenge was awesome! For anyone reading this who hasn't seen it, you can check it out here 👉 ua-cam.com/video/eeLiWZaWRTc/v-deo.htmlfeature=shared
@@HMSGOfficial In the place where I live I have no Chance to Work for a Motorsport Team. I changed to an Office Job because back in the days after my studies i had No Chance to Work in a Garage.
No problem! We have more to come 🫡 Have you seen the rest of our Rally 101 videos? If not, you can find them here 👉 ua-cam.com/play/PLC5WXRaT9L-gr4xQbnw480kXSa6lWJ7Ez.html&feature=shared
Questions: A) What is the torque spec do the team used to tighen the wheels? B) Is the bracket on the side of the car to mount and jack up the jack shown on 1:50 > 1:51 (I dont know what the name) custom made or came from the manufacturer of the jack? C) If I am not in a rush, do I lock back the nuts while the car was still on or off the jack? The reason I am asking this is I actually striped off the nuts/lock-key interface while it was on the jack not sure if its my torque wrench is too underpowered or what? So what I actually did moving forward is to let the wheel touch the ground then I only tighthen it properly but I am not sure if its safe practice or not? D) Care to share the brand of that mini short torque wrench the driver/co-driver use when tightening the wheels(the one where they would stand on top to ensure maximun leverage)
It’s all a matter of practice. Yes, I think I could do it with a little trainment with a team mate. Used to work at car factory, doing lots of operations in less than a minute Keep on with these nice videos 👌🏻
Not sure if it was covered in the Engine video, but what is the difference between modern anti-lag (which sounds like a buzz or rumble) and the old "pops and bangs"? The sound is noticeably different, so I assume that the effect is different.
Hayden did go over it briefly; it's the ALS system, compared to the old pop-off valves and the way the turbo used to work 😁 The modern ALS system is very different, but Hayden explains how it delays the timing so that fuel ignites in the exhaust to help spool up the turbo 😁 Does that help? Let us know!
I am creazy hyper I can do it faster I think (I could be wrong)😂😂😂 And always when I see lady with puncture I am just helping out so lots of experience 😅😅😅😅
@@HMSGOfficial Once we had challange here in Ireland at the rally event racing buggy 2 of us 4 wheels in 1.20 buggy was in the air just to do the wheels 🤔🤔🙁 Would be easier with your car couse I use to work for Hyundai💪💪💪💪💪
@HMSGOfficial I use to work as Valetor and small repairs inside the car. Midleton Ireland the place that sort out Craig Breen with his free Tuscan for a year once he sign up for your team💯🇨🇮
Do you think you could beat Hayden's time? 😉
There was a bit of fumbling going on with that second wheel nut 😉
I back myself 50 flat no problem 😅😅
Very true! He definitely lost a couple of seconds…we clearly put him under too much pressure 😜
Fair play! 😜
You've covered suspension tips, swapped the wheel, now please give us an insight on wheel alignment for every type of surface (snow, hard/sandy/rutted gravel, dry/wet tarmac...).🙏
Hats off for the rally2/Paddon series, loving it!👍
So glad you enjoyed it! Leave it with us, it’s something we will definitely cover in the future 🫡
again perfect video and very interesting topic, super...and respect for Hayden's time
Thank you so much! What is your favourite video so far? 😁
@HMSGOfficial my favorite is about using the handbrake, but i also really liked the videos about the difference between a road mod and a stage mod and about suspension
That's great! Yeah the handbrake one was cool, did you see the ones on differentials and suspension too?
@HMSGOfficial yes they are also very cool and useful, as a former competitor I know what it is about but they are super useful and bring people closer to things
Awesome! What did you used to race? 😀
Love those rims, need to get them for my Hyundai I20N ;)
Yes you do! They are super cool 😎
Ask EP and Janne again. The time the had at the blindfold Challenge was mindblowing. And Thierrys time in Japan where Seb was impressed. I think i can not do this in time.
The blindfold challenge was awesome! For anyone reading this who hasn't seen it, you can check it out here 👉 ua-cam.com/video/eeLiWZaWRTc/v-deo.htmlfeature=shared
How quickly do you think you could do it?
@@HMSGOfficial i am a studied car mechanic so i think 1 min 30 Seconds as a Woman in a mens world you have to better than them with a little pratice.
We reckon you could beat most people! That's awesome, do you work in motorsport? 😁
@@HMSGOfficial In the place where I live I have no Chance to Work for a Motorsport Team. I changed to an Office Job because back in the days after my studies i had No Chance to Work in a Garage.
More videos like these 👍
No problem! We have more to come 🫡 Have you seen the rest of our Rally 101 videos? If not, you can find them here 👉 ua-cam.com/play/PLC5WXRaT9L-gr4xQbnw480kXSa6lWJ7Ez.html&feature=shared
Does the rattle gun torque the nuts to spec or is there something special about the nut to stop it coming loose?
Great question 🙌 Modern rattle guns have inbuilt torque control 👍
Questions:
A) What is the torque spec do the team used to tighen the wheels?
B) Is the bracket on the side of the car to mount and jack up the jack shown on 1:50 > 1:51 (I dont know what the name) custom made or came from the manufacturer of the jack?
C) If I am not in a rush, do I lock back the nuts while the car was still on or off the jack? The reason I am asking this is I actually striped off the nuts/lock-key interface while it was on the jack not sure if its my torque wrench is too underpowered or what? So what I actually did moving forward is to let the wheel touch the ground then I only tighthen it properly but I am not sure if its safe practice or not?
D) Care to share the brand of that mini short torque wrench the driver/co-driver use when tightening the wheels(the one where they would stand on top to ensure maximun leverage)
That was fast 👌🏻
Not bad eh? Do you think you could do quicker? 😄
It’s all a matter of practice. Yes, I think I could do it with a little trainment with a team mate.
Used to work at car factory, doing lots of operations in less than a minute
Keep on with these nice videos 👌🏻
Wow, you are quick! That's cool, which manufacturer did you work for? 😁
Not sure if it was covered in the Engine video, but what is the difference between modern anti-lag (which sounds like a buzz or rumble) and the old "pops and bangs"? The sound is noticeably different, so I assume that the effect is different.
Hayden did go over it briefly; it's the ALS system, compared to the old pop-off valves and the way the turbo used to work 😁 The modern ALS system is very different, but Hayden explains how it delays the timing so that fuel ignites in the exhaust to help spool up the turbo 😁 Does that help? Let us know!
Question , why you not have car on wrc 2 ?
We just don’t run a WRC 2 team anymore, would you like to see us go back to it?
@HMSGOfficial yes i want you comeback 🙂 with paddon 🤩
That would be cool! What did you think of Hayden in the European Rally Championship this year? 😉
@@HMSGOfficial he win erc this year that why he should go wrc 2 😁
We know he did 😉 It was another awesome season from him, are you from New Zealand?
Good job hyundai ! I own a Hyundai Santro :) do you know :) its still im good comdition :)
Awesome to hear! Glad you are enjoying it, how old is the Santro? 😄
Nutz.
schön, dass es Ihnen gefallen hat! Sollten wir Ihrer Meinung nach noch etwas ansprechen? 😄
@@HMSGOfficial Engines. Powertrains. All for fun!
Okay, we will see what we can do 🫡
I used to be Quick when i was a Honda Tech,But It did Not get me any were Only Made redundant.
That sucks! Do you still work in the industry? 🤔
I am creazy hyper I can do it faster I think (I could be wrong)😂😂😂
And always when I see lady with puncture I am just helping out so lots of experience 😅😅😅😅
😂 Awesome! What time do you think you could do it in? 😀
@@HMSGOfficial Once we had challange here in Ireland at the rally event racing buggy 2 of us 4 wheels in 1.20 buggy was in the air just to do the wheels 🤔🤔🙁
Would be easier with your car couse I use to work for Hyundai💪💪💪💪💪
Ah cool! Where and what did you do for Hyundai? 😀
@HMSGOfficial I use to work as Valetor and small repairs inside the car. Midleton Ireland the place that sort out Craig Breen with his free Tuscan for a year once he sign up for your team💯🇨🇮
That’s so cool! Did you get to meet him? ❤️
Dom Toretto drives a Hyundai when hes not in a misson. Good job Hyundai!
You know it 😜