exactly... It's on the back side of transmission near firewall. This is the 2nd one. Got confused with other clips actually replacing 4th one but claiming it's 2nd one. I spent whole day to find the right answer and I just have replaced 2nd s/w for my 2011 pilot 2011.
Good job man. Just bought my 2006 a month ago and it’s jerking on take off..I ease off on the gas,shifts then bangs into 3rd with D blinking I suppose I will have to do what you did. Any other suggestions?
I have the same problem in my Honda odyssey but my friend some reason deleted the code and he forgot the code because he thought that if it is permanent code it will come back again. It appeared on the extreme cold date in Edmonton. Till now this D is not blinking at all. Please advise me. My transmission fluid has been changed from honda and after that, I drove max 30 thousand KM. Thanks
My D light is flashing also on my 2002 Honda Odyssey I also replaced the second pressure switch and the third pressure switch that's what shows up when I run my scan tool.I purchase new ones I put them in and it was off and now it's back on again so I don't know what's causing it to do that but the transmission shifts fine I just replace the transmission not too long agoand also replace transmission fluid everything so I don't know why it's reading it like that but I don't have no problems with it shifting though I can fill first I can feel second I could feel third . Ivan driving up a steep hill once in awhile and it's just fine does not like I mean. I replace the transmission do to the TCS light coming on when I was driving indicating that there is something wrong with the transmission so then I replaced it and it was fine up until just resent when the D started flashing and thenOBD2 shows those two sensors that you just replace second and third pressure switch and it's still flashing. so my question is if it's still flashing after you replace them what should be the next step and how do you perform it.
Ok for the 99 to 2003 model they have clutch problem. If you replace the transmission but a used one then you probably need to replace it again so don't buy a used one you have to buy a rebuilt one only. so it will work properly. 02 model they don't have sensors but clutch problem. Hope this helps.
I have the same problem with my 2007 honda crv, the code that it gave me, was p0843, Now am trying to see if i should just change the switch, because I already added transmission fluid but still didnt work. what should i do?
Elang A check your 3-4 pressure switches and 1-2 pressure switches. They are usually clogged and it cause not enough pressure to get through to apply the clutches.
I like the video very informative I hope you or someone else can help me with this I have a Honda Odyssey 06 D is flashing and check transmission light pops my scanner read code ( P0717 ) input/turbine speed sensor A circuit no signal ) I changed the sensor twice an still doing something I just noticed after 3rd shift the RPMs are above 3000 and don't shift to 4 , 5
If you change your sensors and still not solved your problem I would say that it's could be you clutch are worn out you need to rebuild it or buy a rebuild transmission. Honda does have clutch problem so I Will say replace a rebuild transmission it will solve your problem.
@@alltsab thanks for answer! that help me a lot!!! so this is nothing about pressure switch sensors? I'm not sure if my scanner read engine and transmission is a $35 scanner I'm going to AutoZone see if they can scanner the transmission could be an other code that my scanner don't show too
Very informative and helpful video. Thank you, we keepers of high mileage Hondas must stick together!
Did this on my 2015 Honda Pilot yesterday. Had to do a reset for the engine light to go off. So far so good.
Kevin Archer did it turn back on brotha
Very very well done video awesome loved it it inspired me to do it on my own thanks a lot
Thanks very easy
exactly... It's on the back side of transmission near firewall. This is the 2nd one. Got confused with other clips actually replacing 4th one but claiming it's 2nd one. I spent whole day to find the right answer and I just have replaced 2nd s/w for my 2011 pilot 2011.
Great presentation well-informed thanks
nitpoon thanks for visit my channel please help subscribe my channel
Good video. Thank you
It can cause the gair??
Was the old pressure switch chamber plugged? Thanks.
No doesn't work
I have this problem on my Honda Odyssey check engine plus d light. I changed the trans oil but same thing
What was it
Good job man. Just bought my 2006 a month ago and it’s jerking on take off..I ease off on the gas,shifts then bangs into 3rd with D blinking
I suppose I will have to do what you did. Any other suggestions?
Follow the vdo u should doing fine 🙂
Where can I find the 2nd gear pressure switch? Trying to do a repair and cant find it
The video show it. If you can't find it then you have to ask your local mechanic.
I have the same problem in my Honda odyssey but my friend some reason deleted the code and he forgot the code because he thought that if it is permanent code it will come back again. It appeared on the extreme cold date in Edmonton. Till now this D is not blinking at all. Please advise me. My transmission fluid has been changed from honda and after that, I drove max 30 thousand KM. Thanks
If he deleted it and not come back then all good to go. You lucky.
Where is de sensor p0848, I have problems whit this code
What kind of code reader/scanner are you using ?
Mindlab780 Ab creader professional 229
My D light is flashing also on my 2002 Honda Odyssey I also replaced the second pressure switch and the third pressure switch that's what shows up when I run my scan tool.I purchase new ones I put them in and it was off and now it's back on again so I don't know what's causing it to do that but the transmission shifts fine I just replace the transmission not too long agoand also replace transmission fluid everything so I don't know why it's reading it like that but I don't have no problems with it shifting though I can fill first I can feel second I could feel third . Ivan driving up a steep hill once in awhile and it's just fine does not like I mean. I replace the transmission do to the TCS light coming on when I was driving indicating that there is something wrong with the transmission so then I replaced it and it was fine up until just resent when the D started flashing and thenOBD2 shows those two sensors that you just replace second and third pressure switch and it's still flashing. so my question is if it's still flashing after you replace them what should be the next step and how do you perform it.
Ok for the 99 to 2003 model they have clutch problem. If you replace the transmission but a used one then you probably need to replace it again so don't buy a used one you have to buy a rebuilt one only. so it will work properly. 02 model they don't have sensors but clutch problem. Hope this helps.
@@alltsab yes they defenitly have sensors. Just bought one todat for my 02
I have the same problem with my 2007 honda crv, the code that it gave me, was p0843, Now am trying to see if i should just change the switch, because I already added transmission fluid but still didnt work. what should i do?
is it the cause of slip on matic transmission?
Elang A no, it cause the transmission doesn't shift gear
Elang A check your 3-4 pressure switches and 1-2 pressure switches. They are usually clogged and it cause not enough pressure to get through to apply the clutches.
my odyssey have same problem, check engine light and d blinking? should I go ahead and change the fluid and sensor?
Shah Sawar if the same code. Sometimes it's may have different problem.
thanks for reply, i change the fluid but same problem, not fixed yet. and yes I could not locate that sensor which shows here in this video.
my odyssey is 2006 exl
Shah Sawar do you see where I put my socket that is the sensor
Shah Sawar look at the video timeline at 3:31 that is the sensor location
Hola pudieran mandar este video en español
What about p0780
That code normally will happen in the 99 to 04 odyssey code.
I like the video very informative I hope you or someone else can help me with this I have a Honda Odyssey 06 D is flashing and check transmission light pops my scanner read code ( P0717 ) input/turbine speed sensor A circuit no signal ) I changed the sensor twice an still doing something I just noticed after 3rd shift the RPMs are above 3000 and don't shift to 4 , 5
If you change your sensors and still not solved your problem I would say that it's could be you clutch are worn out you need to rebuild it or buy a rebuild transmission. Honda does have clutch problem so I Will say replace a rebuild transmission it will solve your problem.
@@alltsab thanks for answer! that help me a lot!!! so this is nothing about pressure switch sensors? I'm not sure if my scanner read engine and transmission is a $35 scanner I'm going to AutoZone see if they can scanner the transmission could be an other code that my scanner don't show too
@@noeicaza404 need more detail scan code because cheap scan may not read everything.
Here's the link just one of my pressure sensors/ switch for 2nd and 3rd gear
ua-cam.com/video/bYAnwjFhXDM/v-deo.html
If you want to be a Pakistani, you need to get a transmission p0843