Love the 6ARC content. I was developing the 112gr MB and 80gr TTSX today. Very surprised by how well CFE223 and the 6ARC get along. I was able to get single digit SD's with 5 shot groups for both (38 degrees outside). I have 107 SMK on order, can't wait to see how they compare.
Been watching your Grendel reviews and a job well done Rob. I'm going to give a go w/ the 6mm ARC because I have a lot of 243 bullets, 85, 90 and 100 grain projectiles and Gerdel cases. Any thought with the bullets grains and H335, imr4895, TAC or AR-Comp.
Finished up my 6 arc gas gun then was getting ready to load up some of these bullets then i found out my freebore was seriously short. Like the lands were leaving marks all the way down to .04 from the case mouth on 108gn eld's. Like the content though
Good.morning, I like Barnes Match Burners, I have used the 69s and the105s with good results. Can you share your results with the 112s? Want to see if they are worth my time, thank you.
I worked up a load with n540 and the 112 mb and my rifle shot them really well. Used them out to 600 yds with good results. Look at my 6 ARC playlist I should have 2-3 videos with them.
Hi Rob, I recently purchased a 6mm ARC CMMG upper and shot it using Hornady factory ammo. Wow! It grouped great! Loving your reloading videos for this cartridge. Any experience loading the 95 gr Barnes LRX bullet? Thinking about loading these for whitetail deer hunting. Thank you for all your work!
@@RobsReloading Hello…yes…the LRX is all copper. I had great success loading the 110 gr Barnes TTSX bullets for my 300 Blackout. It’s all copper and worked great on deer. I’ve heard good things about the LRX, but for 243 Win.
I've been waiting for Part 2 to appear largely because i was curious as to what powder you were going to choose. I was banking on it was going to be Varget, given the lower temp stability of CFE223 or Leverevolution, but not so. Any particular reason for the vvN540?
@@RobsReloading There are tons of basic ABC reloading videos on Utube, as you know. I have always enjoyed your channel for more advanced, hope you return there. Thank you.
@@RHorst-pu9cp I personally had not done any basic how to style videos. This is the only other one planned for now. I still think the video is useful. I got my start reloading by watching these types of videos.
@@RobsReloading Yes I agree basic videos are very helpful, I have always come to your channel for something more advanced especially when it involves 6ARC in a bolt gun which there are few of. So keep up the good work, it is appreciated. Thanks for the response.
Great job
Love the 6ARC content. I was developing the 112gr MB and 80gr TTSX today. Very surprised by how well CFE223 and the 6ARC get along. I was able to get single digit SD's with 5 shot groups for both (38 degrees outside). I have 107 SMK on order, can't wait to see how they compare.
Big thumbs up! Really like these reloading series
Been watching your Grendel reviews and a job well done Rob. I'm going to give a go w/ the 6mm ARC because I have a lot of 243 bullets, 85, 90 and 100 grain projectiles and Gerdel cases. Any thought with the bullets grains and H335, imr4895, TAC or AR-Comp.
Finished up my 6 arc gas gun then was getting ready to load up some of these bullets then i found out my freebore was seriously short. Like the lands were leaving marks all the way down to .04 from the case mouth on 108gn eld's. Like the content though
Love what you are doing with 6 arc I just used n133 with 75 grain max it worked out great how is the n 540 with 108 burger
Good.morning, I like Barnes Match Burners, I have used the 69s and the105s with good results. Can you share your results with the 112s? Want to see if they are worth my time, thank you.
I worked up a load with n540 and the 112 mb and my rifle shot them really well. Used them out to 600 yds with good results. Look at my 6 ARC playlist I should have 2-3 videos with them.
@@RobsReloading Been following your work for a while now, thanks for a good job.
Hi Rob,
I recently purchased a 6mm ARC CMMG upper and shot it using Hornady factory ammo. Wow! It grouped great!
Loving your reloading videos for this cartridge.
Any experience loading the 95 gr Barnes LRX bullet? Thinking about loading these for whitetail deer hunting.
Thank you for all your work!
Never tried the lrx but have tried the match burners with good success. Is lrx a copper bullet?
@@RobsReloading Hello…yes…the LRX is all copper.
I had great success loading the 110 gr Barnes TTSX bullets for my 300 Blackout. It’s all copper and worked great on deer.
I’ve heard good things about the LRX, but for 243 Win.
@@DStein-jn9ls I have no experience loading copper solids. Ive thought about trying the new Hornady cx but have not yet.
I've been waiting for Part 2 to appear largely because i was curious as to what powder you were going to choose. I was banking on it was going to be Varget, given the lower temp stability of CFE223 or Leverevolution, but not so. Any particular reason for the vvN540?
No reason, just use a variety of powders. N540 has shown good results. Varget is my favorite overall powder however.
What about safety 🤔
" We "
🤓
Very basic, not up to usual standards of the channel, need to be taken to a higher level not lowered..
Very basic reloading? That was the point of the video
@@RobsReloading There are tons of basic ABC reloading videos on Utube, as you know. I have always enjoyed your channel for more advanced, hope you return there. Thank you.
@@RHorst-pu9cp I personally had not done any basic how to style videos. This is the only other one planned for now. I still think the video is useful. I got my start reloading by watching these types of videos.
@@RobsReloading Yes I agree basic videos are very helpful, I have always come to your channel for something more advanced especially when it involves 6ARC in a bolt gun which there are few of. So keep up the good work, it is appreciated. Thanks for the response.
Dumb comment. Go watch ultimate reloader if you want to see shit you can't afford. Reloading is basic. Clean them size them roll up shoot repeat