ABANDONED BARN FIND Corvette First Wash in YEARS! Satisfying Car Detailing Exterior & Restoration
Вставка
- Опубліковано 9 лют 2025
- The first 1,000 people to use my code WDDETAILING0522 or use this link to sign up will get a 1 month free trial of Skillshare: skl.sh/wddetai...
ABANDONED BARN FIND Corvette First Wash in YEARS! Satisfying Car Detailing Exterior & Restoration. Today, we tackle the exterior of a Corvette that is covered in dirt & debris that hasn't been washed in 2 years that will require us to pressure wash the entire exterior, followed by a wash, clay bar and then polishing the paint to bring back its shine. If you find our videos satisfying or motivating make sure you hit subscribe!
#barnfind #carcleaning #detailing #cleaning #restoration
Join our WD Discord! - / discord
Subscribe: bit.ly/3ukEqZ4
Watch our newest videos: • New Videos | WD Detailing
Follow WD Detailing
Facebook: / officialwddetailing
Instagram: / wd.detailing
Car Supplies Warehouse Affiliate Links:
Tires:
Turtle Wax Hybrid Solutions HyperFoam Wheel Cleaner & Tire Prep: bit.ly/3LtQAIj
P&S Brake Buster Total Wheel Cleaner: bit.ly/3IY0b8k
Sidewall Tire/Carpet Brush: bit.ly/3LsX0Y8
Wheels:
Turtle Wax Hybrid Solutions Pro Rapid Decon Technology All Wheel Cleaner + Iron Remover: bit.ly/3uFtszI
EZ Detail "Big EZ" Wheel Brush: bit.ly/371JJa0
Work Stuff Detailing Brush - Black: bit.ly/3qT9QXQ
Washing, Decon, and Drying:
Gtechniq WM2 Microfibre Wash Mitt: bit.ly/3DuVa6j
MTM Hydro PerFOAMance Soap :bit.ly/3qRShYc
CARPRO Iron X: bit.ly/3JWK3oV
Work Stuff Clay Mitt: bit.ly/36FHqtB
Autofiber Dreadnought Jr. Drying Towel (16x16): bit.ly/3iUEfkc
Polishing:
Rupes BigFoot LHR 15 Mark III Long Throw Dual-Action Polisher: bit.ly/3wUJUyD
Oberk Red Supreme Polishing Pad: bit.ly/3K2b62u
Meguiars M205 Professional Ultra Finishing Polish: bit.ly/3NCOAz8
Oberk Supreme Polish: bit.ly/3wSOkpS
Interior:
Work Stuff Brushes - bit.ly/3aR40Nu
All Purpose Cleaner - bit.ly/34ltq4E
Degreaser - bit.ly/3aR4Bic
Spray bottles - bit.ly/3kYbXF4
Spray Triggers - bit.ly/32a8Zot
Hyper Dressing - bit.ly/2EkCH1K
Gloves - bit.ly/3hhGWtD
P&S Leather Treatment - bit.ly/3gjbLg9
Watch more videos!
Barn Finds: • Barn Finds | WD Detailing
Stealing Cars & Surprising: • Stealing Cars & Surpri...
Muddy Jeep Details: • Muddy Jeep Details | W...
Most Popular: • Most Popular Videos | ...
About WD Detailing:
Welcome to the official WD Detailing UA-cam channel! We will provide you with all kinds of detailing entertainment and purely satisfying videos! If you want to see some insane transformations of dirty vehicles, barn finds, nasty carpets & seats, or learn a thing or two about detailing along the way, then you've come to the right place! On this channel you will find a variety of content like car detailing, extreme deep cleaning and more! Make sure to subscribe and enable ALL notifications!
If you're looking for more instructional videos, we highly recommend The Detail Geek! We'll link his channel if you haven't seen his stuff!
The Detail Geek: / @thedetailgeek
The first 1,000 people to use my code WDDETAILING0522 or use this link to sign up will get a 1 month free trial of Skillshare: skl.sh/wddetailing05221
Also, don't forget to let us know if you want a full tour of our new shop when it's all finished! (Oh, and like the video 😉)
Ill to tour
I would like to see the new shop in 'before' mode, then a full tour of the finished project. Given the choice of engines: I would look into restoring the original one or at least finding one just like it.
I would put an LS3 in it. Nice transformation. Keep banging it out. 😎👍🏻
Great job,, you are one of few guys cleaning cars that wash the engine 👍🏽👍🏽👊🏽👊🏽🏆🏆
Grats on the new shop! Been great watching you guys grow over the years! I bet having your own place to work out of feels amazing! Keep up the great work!
My dad passed last year. Left me his '74 Corvette. The original engine had bad compression, so he did a similar year 350 4 bolt main block, 383 stroker setup, slightly higher compression pistons, a Edelbrock Performer Cam and Intake, then factory carb adjusted for displacement and cam change. Maybe only makes like 50+ more hp/tq but still fun. Just needs better rear mono lead setup.
I would LOVE to see your new shop!!! It's good to see good people "growing"!!! Congrats!!!
fridays are complete when WD videos are loaded....
just a quick question: there are probably hundreds of detailing videos (on YT), but you guys are the top three for me, one thing ive notice ( and yes you guys are guilty of it too...lol), during the detailing process you mention how long the job took....be it 8hrs or 16 hrs, think the shortest being 4hrs, at what point do reach in the process where you say "i should take a break"?
I'm NOT a professional, but I detail my own car and I take about 5/6 hours! I do the interior, then I take a brake and then return for the "exterior job"
😲😲😲😲 the paint looks sooooooo good!!! 😄
Sure! I’d like to see a tour of your new shop, if you’re up to giving us a tour! I hope your new shop makes your auto detailing lives easier, too.
*YES* to a new shop tour!
I know I'd love to see a full tour! I thought that was an interesting location for a detail shop in a parking garage. Did you have any difficulties logistically by doing that?
And I'm interested to know if you got to customize the new shop at all. Really great to see your channel growing and absolutely loving the style and flair you put on your work and the videos!
By the way an awesome video and as a Corvette owner I can tell you that C3 Corvettes carpets have a tendency to degrade over time to the point where it has to be changed that's why a lot of aftermarket companies sell replacement carpets!
Such a beautiful car. Loved every minute of this detail. Great job as always, guys!
My dad had a 78 Stingray Powder Blue.. Only a few made, so this made me VERY nostalgic to say the least!!!
finally the return of cakeboss and wonder boy!
Love to see your shop when its finished.
Yes to the shop tour. As for the engine, if it is less expensive to just drop in a new/rebuilt engine that fits rather than do a rebuild on the existing one that is the route that should be taken. As for a replacement, not smart enough about the subject to offer any suggestion. LOL Back in the day, had an friend who had a stingray and offered me a ride. You could tell he was proud of it, but it road like a dang lumber wagon over a rough road. I kept my mouth shut about it and complimented him on the car. Made me vow not to be so wowed by a two seat lumber wagon, This one is a bute considering the unusual color that shines like new dime. Great work and amazed at how well the paint job looked after you were done with it. Bravo....more, more!
Congrats on your new space guys! Of course we'd like to see it!
Congrats on the new shop. Let's see a video on it when it is finished. Car came out showroom great work!
Now that it is clean (again), will it be kept nice or will it stand outside again, not being fixed&used/taken care? Great work!! 👍
The Paint results are probably the BEST ive seen un my entire Life.
Yes to a shop tour!
Solid clean bro ❤️❤️❤️
Yes, full shop tour!
All the best with the new shop you deserve the best for your great job
Yes I’d love to see a full tour!
Really nice job Guys on the classic corvette. Congrats in the new shop.
I'd love to see a tour! Before, during and after. I think it's really fun to see the remodeling of a shop like this.
It would nice to see your new shop/garage 😀😀
want another old corvette? My grandpa has a c2 that's been sitting in his garage for probably 25 years and it's never going to drive again without a full rebuild but it would be fun to detail. We'd have to uncover it from all the boxes and carpets and other garage junk though 🤣
the paint is EXTREMELY oxidized too
If you’re near cleveland, ohio, dm us on instagram!
If the engine miles arent bad, I am 90% sure I could get it to turn over. Often a car just sitting can cause it to seize up. The rings get stuck due to moisture. I've seen cars sitting for 30 years turn over after soaking down the cylinders for a day.
Yes old and new shop tour please and thank you.
Came out really well. Love the shine.
a nice lil LS never hurt anyone 😁
You should also try washing a 1967 corvair Monza convertible
Absolutely gorgeous! Both the car and the detail! I did have a chuckle at the Saturn floor mats though.
The result was fantastic!!!
Fantastica. Stupenda!!!!
Would love too see a full tour of new shop. Congrats btw o the new digs!!
Definitely want to see the new shop
I think I've seen this video 3 or 4 times now (I watch many, so forget sometimes), but it is still good every time. No wonder part 1 (and the hoarder car) were your homerun video views; just good content. Question: do you wash the backs of the car mats? You never show it. I don't in my cars, but I imagine a grossmobile like the barn finds would warrant it (with rat pee and all that). I did like how you hung the mats so they drain as washed, but then saw the video with the old mat that ripped. I see you don't make the same mistake twice on these carpets; that's just you stepping up your game. Kudos. C3 is my fav vette. the shop has got to be done by now, eh? you should franchise.
Would love to see a tour of the new shop and that beautiful Stingray came out beautiful great job
excellent transformation 👍
The color is beautiful
A tour of the new shop would be appreciated.
Yes I would like to see your new shop
she is a beautiful car i love the colour, you guys know your stuff exellent job
Yes !!!!! Please do a shop video
And just curious. Are you guys friends with any fellow UA-cam detailers .. just curious as I find it very interesting if any detailers are friends … thank you…. And keep up the good work
I would love to see a full shop tour!
Would love a full tour of the new shop!
Very very nice job. Well done.
Hi there..yes, please provide a tour of your new shop when it it is finished..thanks.
Félicitations, je m'inspire beaucoup de vos vidéos. Merci
Yes full garage tour 👍
Yes, full tour please!!
Do people not know that putting moth balls in your car, trunk and under the hood helps keep the critters (aka mice) out? You should mention this sometime. I Love polishing my car and watching y'all!
A shop tour would be great!
yessir give us a tour
Great job. I did see the first one on this car.
yes i would like a tour of the new shop
This car deserves a restoration.
Awesome color
Yes sir wddt
I was wondering if it wouldn't be more beneficial for the car to get ceramic coated, so that if it does go into storage again, it won't have to be paint corrected once more, from a preservation stand point
live the videos and congrats n the new studio!!
Yes Please!! 👍🚗
Definitely would replace the engine with a F1X Pro-Charged 427 Big Block 🔥
You should contact Derek from Vice Grip Garage to get that engine running in the Corvette. He does that kind of stuff all the time.
I think a shop tour would be in order. :) As for the engine, it would probably break loose if you pulled the plugs and soaked the cylinders in a mix of Marvel Mystery Oil and WD-40 for a couple of day. The purists out there will hate this next comment, but I'd convert it to an Electric if it did need to have the engine swapped out.
No, you wouldn’t. People who casually mention converting something to electric would never lmao
Awesome results would so enjoy buying a vehicle you have cleaned up as you are aware of and respect the cars age.
Put an LS 2 or 3 in it cheap at the junkyard pull it out a van or pickup and get a wiring harness from wiring specialties in Connecticut.
Perfect 👌🇲🇰
Yes, I'd like to see a full tour of it
Greetings from Panama
Three numbers, 455. But, try to unstick the engine via pouring diesel, marvel mystery oil, or atf into the cylinders for about a month and try (during that month) multiple times to turn it over by hand or drill. 👌
First one to comment lol keep up they awesome work guys
Would love to see a tour including the products and tools you guys use
A full tour isn't a want it's a need :)
👀
Swapping out that engine? Depends on budget and intended use...LS swap is always a good move if you actually want to use it with modern gas. If I chose today I'd find an old big block and put and Edelbrock multiport fuel injection just because I love the sound...not to bumpy of a cam, though. Smooth idle big block for me
After watching the rest of the video, yeah those floormats have to go. And this car seems more appropriate with a mild small block that's well-sorted
Do a before and after with the shop and definitely a tour
tell your uncle to buy a car cover .....sheesh haha
lowkey disrespectful
yup....new garage tour is in order
great vid guys
Nice color
Ofc we need a full shop tour lmao
wow. imagine having something super nice that you don't deserve & you let it go to shit, then someone treats it as it deserves for you for free, then you let it go immediately to shit again. what a time to be alive.
Engine could probably be saved, but if I was to replace it I'd go with a 383 sbc with an aftermarket holley fuel injection setup for daily drive ability
It’s got a nice color
Nice shop guys. Do you use a paint sealant?
Regarding the engine, I would replace the stock 350 CID with a new modified 350 crate motor. I would keep the automatic transmission.
Vare good car ✅
I'd get the original engine rebuilt.I had a 72 L48 .They are great engines
I wanna see a shop tour.
Yes please
Sheeesh I wish I was in your state or you guys were in mine 😩
I would replace the engine of that corvette with a ls7
شي رائع وجميل
That cover right there, I believe that is where the battery is, my brother had a 79 Corvette, that's how I know that.
always enjoy watching ur videos guys keep up the awesome job... much love from australia.. im always in discord too :) can u guys do an exotic car next time maybe??
I wouldn't replace the engine whatsoever. What I would do is take that clunker str8 to the junkyard and have it turned into a pancake!
I would rebuild the if numbers matching and maybe bump it a little bit
I would love to see a tour of your shop.I would rebuild the original motor. With a high performance cam.but not to radical. Just to make it more fun to drive.