Honda Super Cub C50 Full Restoration - Will It Run After 40 Years?
Вставка
- Опубліковано 25 сер 2024
- Honda Super Cub C50 Full Restoration - Will It Run After 40 Years?
- I hope you guys will enjoy the video and also share your positive feedback and opinions in comment section.
#restoration #metalrestoration #hondacub #cubc50 #supercubc50
#supercub
* Our Fb:
/ metalrestoration.yt
* Our IG:
/ metal.restoration
* Our Vk
metal.r...
* Our Twitter
/ restoration_bho
* Our Patreon
/ metal_restoration
- Please support us by click the subscribe button! It'll help me improve the next video alot! Thanks you.
/ @metalrestorationbho
© Copyright by Metal Restoration ☞ Do not Reup
Where are you from?
Bình Tân Vĩnh Long
Pontianak, kalimantan barat, indonesia
Turkey, Antalya
Austria
🇹🇷Turkey
This has got to be the most detailed, most thorough restoration I have ever seen. You boys certainly know what you are doing and you have done a fantastic job. Well done. I wish I had your skills!
thank bro😊😊😊
الاجذ
All of the people that dislike let’s see you restore a motor bike that looks this good and runs in a third world country most of you probably wouldn’t know which end of a wrench to use! Great restoration and great video!
Poor Super Cub was abused and neglected until you guys got it. Good job!
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
When I see stuff like this, I immediately think "these are GOOD people in the making".
When I see this stuff, I imagine Rick Harrison from Pawn Stars: "I'll give you $100.00, but I'm taking a huge risk here..."
ua-cam.com/channels/KCGSsPa07Dheqcn5GkMLjQ.html
❤
Man, the labor put in this is priceless, well done
I´m deeply impressed. We all know the "restoration" videos where the main part is polishing and buffing all engine parts to a chrome-like finish and applying spray paint to the bare metal of the frame. *This one is quite different*.
This was a full engine rebuild with new bearings, bushings, seals, gaskets, piston kit, valvetrain overhaul, timing chain including tensioner and countless other new or refurbished parts. They even sprayed primer on the frame before spraying it with new paint.
The engine is basically like new. This Honda may not look as pretty as other "restorations", but it will be very reliable for many years.
Look, I´m from western europe, and even I would buy this Super Cub without hesitation, knowing it is in perfect mechanical condition.
thank you bro 😘😘😘😘
i feel the same regarding the restore, apreciated the quality process for painting!
@@iancu1982 thank you
Indeed, but it's also the prettiest you can get by using very elemental tools and lots of elbow grease. Superb job, it's not a restoration for showroom, but for a daily use. My kind of restoration.
Молодцы даёте вторую жизнь старым и забытым вещам. Респект вам!
i love it. we all need this life style. we save the world . we should repair and restore everything. material is not infinity.
Banten - Indonesia
The fact that many thousands of this make and model are still on the road today, is a testament to their good quality, sturdy build and reliability.
thank bro 🙂🙂🙂
When polishing, keep the piece oriented in the same direction and move the piece in straight lines. That will keep it from looking cloudy and make the grain of the metal uniform. Been polishing metal on the side for 15 years.
thank bro 😘😘😘
I think the same... that was ''the worst detail'' of the video, the polishing; the piece could be better...
Super Cubs are so well built they can never die they’ll probably last another 100 years or maybe longer
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
your videos are really awesome man, keep it up
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
33:45 the moment of happiness is 100 times more precious than a new bike even a car.
😊😊😊
it takes me back 25 years when i first learned to ride with a bike like that .thank you for the flash-back ,it was a great video.
It takes me back 50 years,bought my first honda in 1972.I am still a biker,now on my 25th bike
Brought back memories when I was 14 and had a bike just like that.I put it back together myself.Thanks so much!
I found your channel by adventitiously, but after watching this video, I immediately subscribed. this is so incredibly cool work done! all the best to you!
C50 C50 LLEGANDO AL PARTY EN LA C50
thank you bro 🙂🙂🙂
I'm from Indonesia I like motorcycle
@Jamar N motolonte
Saya dari Jawa bg
Yes i'm from indonesia i'm like memek
Jambi bang
Ra ngurus
Best part of this restoration is they used minimal tools and simple techniques.. no high tech equipment talk about being resourceful and talented!!!
Que hermoso es ver ese trabajo que hicieron, con una moto legendaria. Se ganaron un suscriptor 👏🏻
What is with the dislikes?. At least, if not for anything for the time spent on the project. Dude deserves a massive thumbs up for undertaking such huge project.
thank you🙂🙂🙂
always a pleasure to see people bringing new life in a respectful manner to these legendary machines!
Man with taste and precision.
And these retro classics should be launched again with exactly same looks and mechanics.
These videos from the channel are true lessons in patience, perseverance, objectivity and faith in the human capacity to overcome challenges. Congratulations!
جعتتت
I had one of those as a teenager and drove it everywhere at full throttle, it went on for years.
thank you😊😊😊
Metal Restoration why are you saying thank you for??? Boomer
@@k0hji575 not a boomer just a language misunderstanding
كفووو
@@k0hji575 because they're too nice to say shut up stupid.
How can some1 dislike this ... ???
2.1k dislikes .... god have mercy on them .. they need ur blessing ...
😊😊😊
Certainly because of the music! Doesn't suite the video subject at all and highly annoying
@@MetalRestorationBho honda 70
De repente llegué aquí y no pude parar de ver el vídeo!!!👏🏽👏🏽👏🏽👏🏽 impresionante!!!😱
Mantap benar. orang Indonesia memang cerdas dalam hal restorasi kendaraan yang sudah lama tidak dipakai.
C50 C50 llegando al party en la C50 🎶🎶😂
🙂🙂🙂
Great restoration video!! Awesome!!
Fantástico demais, esse vídeo merece um bilhão de LIKES!
That was done with practically nothing compared to even a moderately equipped shop. Nothing goes to waste. Well done.
thank bro so much 😍😍😍
LOL. That donald duck engine sound was so nostalgic.
thank bro 🙂🙂🙂
Malam Gusta venkadesh
Yo
The whiiirrrrriiiii
Pk
Lets start a Go Fund Me account for this guy and buy him a sandblaster. He’s such a good worker! 👍
That is a right nice thing to do as with what he has he did a real nice job restoring it.
You guys rock!
It's absolutely amazing what you are able to achieve with almost nothing as workshop tools, your work is amazing keep up, cheers from Italy! ^_^
Se pasaron, una de las mejores reparaciones que he visto felicidades
😂😂😂
Aguante la c90
@@leomessi-fb8xh eaeae yo tenia una c90 y si iba a los boliches en el jajajajajaj
liliana gil dicen los orientales que gracias por tu comentario.
Bueno vi una parte que no le puso el engrane en bolante de transmicion
Why not using pair of gloves while working on all those old oil and chemical stuff?
I thougth the same question!...this motorbike was dirty a lot!
You're not the one who'll use the bike right?
Real mechanic dont wear gloves
I think it doesn't really matter this much when you wrench as a hobby, but as a professional mechanic being exposed to these chemicals everyday for 8-10 hours a day for 30-40 years can really fuck you up. A box of nitrile gloves can be a cheap insurance.
These guys are asians!!!
I actually couldn't believe, that the engine has a valvetrain. A serious OHC valvetrain in a 49cc motorbike! I'm truly amazed by Japanese engineering and what they were able to make in the era, when this bike was made.
I had one back in the day-it was fantastic-so totally reliable-wish I had one now!!!
@@phillipmcdonough1347 that’s Honda for you.
@@memybikeni9931 thanks! yes indeed -I'm driving a Honda Civic 2003-going beautifully with over 350,000 on the clock-as you say,''that's Honda for you!!
They stopped making them because they were so good until electronic ignition problems started I had my dad's c70 in the 80s handle bar faring leg shields 12miles back and forth to work 50 mph worked out a penny A mile Road it every day for five years didn't put a spanner on it fantastic little bike used my cx500 week ends and evenings lol
@@phillipmcdonough1347 me too I had c70 points model which did you have
THE HUMANITY NEEDS TO THIS PERSON !!
Thanks for your feedback. Hope you will continue to support us in the next videos.
An absolutely wonderful video to watch. I enjoyed seeing the skill and mindset of the builders overcoming each hardship like that damn rear axle. Thanks for producing a great video...well done!
thank you bro 😘😘😘😘
The background music is so distracting from the awesome job you’re doing.
thank for sharing 😊😊😊
beautiful work .. no gloves when you clean pièces ?
I'm from Mexico but I'm in Portland Oregon and so far this guy has my respect!! At the end of the video i couldn't believe i was looking at this beautiful bike. Abrazo hermano, great video keep it up
Wong indonesia like 😀😀
40 tahun oli ra ilang mas🤣
Aiumu
Wang wong Wang wong
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Ain't gonna lie, just as in life I partially skipped the hard work and went for the end to see the final result. Looks amazing
thank you bro so much 😘😘😘
Отличная работа, молодцы. Я так бы не смог. Вторая жизнь мопеда.
The level of patience is off the chart. Amazing work!
ال
This is absolutely incredible! I really enjoyed watching this & I cannot begin to imagine the amount of time you put into this project. Well done!
thank bro 😘😘😘
I really appreciate ppl who do this kind of job...I would've been missing parts left and right !! 🙈😂
thank bro 🙂🙂🙂
Its really good job bro
Syed Aleem Yep !! It’s really impressive.
Great job buddy, I liked the result 👍
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
What a great restore. Quite a big job, but it turned out great! Love the color, too. Thanks for sharing.
wow he knows every single part of the motorcycle 👏👏👏
thank bro🙂🙂🙂
“Back to the Past”. Incredible job!
thank you😘😘😘
Класно!!! У этих ребят руки растут явно из того места из которого надо!!!
YANG MERASA ORANG INDONESIA NONTON INI JANGAN LUPA LIKE👍🏻
Ini konten org indo bukan ya?
Extremely satisfying to watch. Therapeutic.
See ya all in 5 years when youtube recommends this again
thank you🙂🙂🙂
Stolen but it's ok
@@eanalbe3525 It's not stolen it's just popular
@@kysrussiansandindians0 ok thanks
See ya all
Good work saving a old bike you are a doctor
вот это ЛЕГЕНДА , рядом ни чего не стояло . Спасибо великому Соичиро Хонда .
This effort = 10 new bikes effort 😃
thank so much🙂🙂🙂
Ofcourse really
How beautiful, I congratulate you for the intelligence you have to do these wonders
thank bro 🙂🙂🙂
I'm also happy with Honda motorcycles! Thank you! from Japan!
Respekt.
Gruss Sakib
Wow I enjoy watching this. I remember when my grandfather had one he used to bring me on it to school.lol great feelings
thank you🙂🙂🙂
Would be much better without the music. Good job though.
thank you🙂🙂🙂
Amazing Restoration.. Congrats and Greetings from Argentina, Buenos Aires.!
you did well with this poor old motorcycle dont change anything ontinue just like that !
That was a fantastic restoration! I've never seen paint taken off with a blowtorch before. That was excellent!
thank you🙂🙂🙂
I did this with a 1971 Suzuki TS-90 (trail/street). I run it a few times each year in nice weather. Antique licensed and insured it spends most of the time in my 2nd floor garage-machine shop. Sorry I didn't make a YT vid - though I do have lots of photos along the way. A diamond disc cutter from Harbor Freight will cut bearings off real easy. Most of the work 80% is tearing down and wire wheel cleaning every last bolt and nut.
thank for sharing😘😘😘
You are a real genius. I love repairing old machinery and bicycles etc, but you are way out of my league. I really don't understand how you can keep track of everything. Fantastic video. Thank you.
Cem palavras este é cara parabéns
That's a daunting project done very well. Your first ride must've been priceless!!!
thank bro🙂🙂🙂
Parabéns pelo ótimo trabalho
Ficou como praticamente nova um like do Brasil 🇧🇷👍
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Perú, nice job
அம்மாடி ! ஒரு மேஜிக் பார்த்தது போல் இருக்கு.நல்ல திறமை, மிக்க நன்றி.
I don't know what you said but your writing is beautiful
Really appreciate the hard work and determination to get this bike up nostalgia
hi bro so much🙂🙂🙂
While not perfect, but really close, it is a great job anyway. Very nice refurbishing job. Thumbs Up!
thank bro so much 😍😍😍
日本語ですいません 本当に素晴らしい このカブも喜んでると思います こんなに技術をお持ちで 尊敬します これからも頑張って下さい 日本から応援してます
Good jobs, restorasi Honda supercub👍
C50 C50 llegando al party con la C50 Ndeaaaaaah
Thank so much ❤️❤️❤️
Estaba esperando este comentario
if they had better tools it would've came out way better props to them they did an outstanding job 👌🏽
Thank you so much 😉😉😉
WoW great restoration
Good job man 👍
Greetings from Saudi Arabia 🇸🇦❤
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
I'm imagining this c50 with apple red color and chrome plated bars😍😍😍
thank you😍😍😍
That was one helluva lot of work, especially with so much being done manually. Well done!
🙂🙂🙂
I love minion
Restauração muito bem feita, parabéns pelo trabalho.
Guys, you are not GOOD at restoration. You are restoration GODS !!!
It was the dream vehicle of the man who bought it... when it was launched
thank bro😊😊😊
Llegando al party en la c50
thank you bro so much 😘😘😘
Qué dijiste!;
C 50 C 50, llegando al party en la c50
Jajaja jaja entre al vídeo sólo para buscar este comentario! 😂
Probably would have speeded things up if pressurewashed first
Keren...Ada orang Indonesia yang nonton ini selain saya?
Nyong nembe nonton
hadir jabar
hadir sunda
Hadir mas bro kamboja
Hadir banyuwangi JATIM
You are a mechanic with magic quality to revive the things
Thanks for your feedback. Hope you will continue to support us in the next videos.
Mind blowing job even though I like engineering , congratulations for your hard work I appreciate
hi bro 🙂🙂🙂
nice job, but in my opinion other color it"ll be better.
thank bro for sharing😍😍😍
Лайк за труды . Увидел для себя много интересного .
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
This is art
very good ! work of especialisty.
Thank you for this video! Such a skillful and amazing restoration 🙌🏼
thank bro 🙂🙂🙂
Excelente trabajo los felicito ustedes son unos verdaderos maestros gracias por el vídeo 👏
Isso e um quebra cabeça, q memória!!! Parabéns q dom incrível