spree rebuild

We are rebuilding a Honda Spree with a $50 rebuild kit. Hopefully it will work, lol. It should be fun. Check it out with us and see the problems we have with this little spree.
#spree #moped #honda #motorcycle

[@timspur7203]

I got a 85 spree for my 16th birthday brand new I still have it I need to pull it out and get it running again.Every so often mine would start bogging down and a Honda mechanic told me to take the muffler off and burn it in a hot fire then take it out use a water hose to blow water though it while tapping on the muffler with a piece of wood.I would get a lot of chunks of carbon out some pretty big.Put muffler back on and it would run great again

[@octanegarage3729]

Thanks for watching. That's awesome that you still have it. Glad to hear you got it running good again 👍

[@user-bh8zb1ib7r]

Ouch,been through 257 motorcycles since the last 70's .😂

[@trisic2697]

I threw my exhaust in a fire for a couple of hours to burn out all the oil. It seemed to make my Spree start and run smoother.

[@octanegarage3729]

Thanks, that's my next video

[@trisic2697]

Great video! Easy to see what you're doing!

[@octanegarage3729]

Thanks for watching

[@TN_HondaDad]

I would still definitely clean the carb and make sure all the jets are clean and float is good. Enjoyed the video. A spree was my independence and freedom when I was 13! Brought back some memories for sure of riding around in middle school.

[@octanegarage3729]

Thanks for watching and sharing. I always wanted one back in the day. My friend had one, and I was lucky enough to have some fun with it

[@opichocal]

I rebuilt a Zuma 50 two stroke this year. I replaced nearly everything and it would idol but wouldn’t rev up. I found a comment on the forums about the exhaust being plugged up. I spent an hour with it on a camping stove, map gas and an air compressor. Man it runs like new and I’ve never seen it do 42 mph before

[@octanegarage3729]

I'm glad to hear you got it running well. Thanks for watching

[@Blackafternoon]

You have the best channel! I have been looking for a simple repair video- you are an honest and down to earth man- no editing needed ❤ god bless you and the fam- and the camera guy too! ❤ thanks a lot - i dont have a father to teach me

[@octanegarage3729]

Thanks for watching and the nice comments. I'm sorry to hear you don't have a father to teach you. If you have any questions , feel free to ask me, and I will do my best to help.

[@christopherpoucher483]

Me and my buddy bought one back in 2003 for 25 bucks, at 13 years old. Best summer ever, took the alleys and washes😂

[@octanegarage3729]

I was not lucky enough to have one at that age. Always wanted one did have a friend that had one we put a lot of miles on it was a great time 😆 thanks for watching and commenting

[@GarageNoise]

Nice work Bud!

[@octanegarage3729]

Thanks

[@pinknightmares3264]

im about to buy one man, you are fucking fantastic to watch

[@octanegarage3729]

Thanks for the support

[@fthrgasp]

Hey congrats on getting it running! looks like it's gonna be a little bucket of fun

[@octanegarage3729]

I think you are right. Thanks for watching and supporting the channel.

[@mostdope3178]

This guy is Quirky and fun to watch. Awesome video man.

[@octanegarage3729]

Hey, thanks for watching and supporting the channel

[@carlosg1165]

They had them brand new for 300 dollars in 85 about 400 dollars out the door new .

[@octanegarage3729]

Yes I to remember that, wish I could get them for that price today! Thanks for watching

[@montey1017]

Thats what a roached one costs today 😂

[@mariolugo3114]

You just answered my question about the filter.
You're a Saint lol

[@octanegarage3729]

Thanks for watching and commenting. Hope it was the answers you were looking for, lol

[@Yadrigta]

Nice build👍

[@octanegarage3729]

Thanks for watching

[@montey1017]

Answered every question I had regarding my '84 spree basket case. Ordered the niche industries kit, a carb, some tune up parts...you cut away when you said what compression was supposed to be 😂

[@octanegarage3729]

Thanks for watching and commenting. Hope my video helped. Good luck with your spree. If you have any questions, let me know. Sorry, I cut away, lol. If you have at least 90 psi, it should run.

[@montey1017]

@octanegarage3729 got 30psi, it ran but not well.

[@octanegarage3729]

I would say that is the problem.

[@matthewfredrickmfkrz1934]

​@montey1017 spree service manual says 114psi or more

[@evemancia8093]

Good mornning, congratulation for this video and share, how to conect the Electric wire, all ligth?

[@octanegarage3729]

Thanks for watching and supporting the channel

[@mikemorris2159]

Way to preserver!

[@visitperaiagreece]

Very cool!

[@octanegarage3729]

Thanks for watching

[@timelordnoah5179]

Gotta pull out that atc and show it off too! Cant have enough honda machines.

[@octanegarage3729]

We actually did a video, if you are referring to the 200X. If you go to the channel you can check it out. Thanks for watching.

[@mariocabrera804]

Reconstruyó el motor e hizo miles de pruebas y solo tenía el escape tapado con carbón,....

[@octanegarage3729]

Thanks for watching and supporting the channel 👍

[@mikesbarn1858]

The proper torque specifications on those engines is 1 ugga dugga. 2 will strip out threads.

[@octanegarage3729]

Lol, you're right about that. Thanks for watching and commenting.

[@blygutta8280]

The engine looks like its the same one on the Honda Sh50 "Scoopy/City". England uses the name City and here in Norway Scoopy. But Spree is new to me....and it is only the engine that looks the same.

[@octanegarage3729]

I have never seen a Scoopy/City. I will have to look that up. Thanks for watching.

[@timelordnoah5179]

Gotta love scoot life.

[@octanegarage3729]

Yes you do!

[@octanegarage3729]

Thanks for watching

[@toddodell2904]

That oil pump did go out and raw gas causes that piston to burn.

[@octanegarage3729]

That's what I was thinking also. Thanks for watching and confirming that for me.

[@andrewduy7263]

Hey thanks for making this video, I just bought a spree that I’ve been having a bear of a time trying to get it running. Can you link where you got the rebuild kit? I’m gonna try this.

[@octanegarage3729]

I hope it goes well! Thanks for watching and supporting the channel. Here is the Amazon link.
a.co/d/bFFcZZI

[@jimdryden4947]

Where did you purchase the kit from? Great video man!

[@octanegarage3729]

I got it from Amazon sorry .NICHE 50cc Spree Cylinder Piston Gasket Top End Kit for Honda NQ50D Spree SB50P 11984-1990 2101-GK8-000 12251-GN2-000 a.co/d/90UZFfv

[@octanegarage3729]

Thanks for watching and commenting put the link in comment

[@vsemumirubrat1342]

Круто, у меня тоже есть скутер, но более новый Dio 35 ZX

[@octanegarage3729]

Thanks for watching, I'm not familiar with the Dio 35ZX, I will look that up.

[@martinmustang73]

The cylinder head is the wrong way around it wont cool the engine you are lucky if by now it hasnt blown up...

[@octanegarage3729]

Thanks for watching and commenting. I will take a look at the cylinder head and switch around. Thanks for letting me know. Luckily, it has not blown up.

[@user-np9cm9je2q]

👍🎣⛵💯

[@octanegarage3729]

Thanks for watching and supporting the channel

[@briansegarra9312]

First 🤣

[@octanegarage3729]

If you not First or last. Lol 😆

[@octanegarage3729]

Thank you for the like and support

[@ferminmercado384]

Very good!!! You found out!!&

[@octanegarage3729]

Thanks for watching and commenting