Це відео не доступне.
Перепрошуємо.
BEST VALUE - ACCESSORY SWITCH - VOSWITCH UV100 - FULL INSTALL 2020 TACOMA - UV100 GIVEAWAY
Вставка
- Опубліковано 24 січ 2021
- A complete install of the VoSwitch UV100 into my 2020 Toyota Tacoma which I have never seen before. I also fabricated the tray that the UV100 is housed on. Step by step, you can install it too.
VoSwitch UV100 Giveaway Rules
- Must be Subscribed to Adventure Built UA-cam channel / adventurebuilt
- Must Like the video
- Must leave a Comment describing what you would do with your new VoSwitch UV100
*only available to ship to the lower 48 only, I apologize to my international friends
Giveaway winner will be announced at the end of the Adventure Built video to be released on Monday Feb. 8
Follow us on Instagram - / adventurebuilt_
Follow us on Facebook - / adventure_built-110208...
VoSwitch Discount Code - vos398768
Can only be used at www.voswitch.com
www.voswitch.com/UV100-Univers...
Discount Code expires on Feb. 15, 2021
Meso Customs Extended Fuse Cover
mesocustoms.com/products/exte...
Tools Used
CRAFTSMAN Small Angle Grinder Tool 4-1/2-Inch, 6-Amp
amzn.to/3qSTLz1
DEWALT Cutting Wheel, General Purpose Metal Cutting
amzn.to/3sU2X88
DEWALT - Brush 20V MAX Cordless Drill Combo Kit
amzn.to/3sSPzB1
Neiko 02847A 2 LB Dead Blow Hammer, Neon Orange
amzn.to/39f11it
CRAFTSMAN Drill Bit Set/ Screwdriver Set 21-Piece Titanium
amzn.to/2LT31V3
DEWALT Titanium Drill Bit Set, 10-Piece Impact Ready
amzn.to/3iJyPr5
Dremel 8220-1/28 12-Volt Max Cordless Rotary Tool Kit
amzn.to/3phHJ1s
Dremel 561 Multipurpose Cutting Bit
amzn.to/2MmDpPU
Pittsburgh Professional 7 Piece Metric Ratcheting Combo Wrench Set
amzn.to/3iKWkAo
5, 12" CRAFTSMAN HEAVY DUTY REVERSIBLE RATCHETING BAR CLAMPS
amzn.to/36akTl4
This is probably one of the best install videos I've seen, very thorough. I'd love to get one of these for my light bars and ditch lights. My wires are starting to get a bit messy and this would definitely clean my engine bay up to add more accessories. Great video and can't wait to see the next one.
I love how this VoSwitch is super affordable vs the competitor and looks much better in quality. I would wire this up on my taco for my ditch lights, front bumper light bar, rock lights, and chase lights! Seriously my favorite channel! I look forward to these videos all time!
This would be a great addition to my rig build with all the accessories I can connect and it doesn't break the bank. great alternative option to what's out there. Thank you and keep up the informative and entertaining content you put out.
I have avoided setting up accessory lighting because of the price of s-pods and similar systems, but with something like this I would definitely start throwing lights everywhere on my Tacoma.
I really like how easy this switch is to install and use. I'd would use this for my bumper hidden light bar and I can finally add rock lights, camp lights on my roof rack, and a chase light for those dusty trails! I have also been looking to do a duel batt set up and this would be a huge piece to make that happen!
Great video!
Kelly, really like yours and Trevor’s videos. You guys always do a good job of capturing the trip. Liked the BDR series and you and your son in Colorado. Great job and really neat you have family to share it with. We have similar builds but on different frames. Mine is a Frontier Pro4X but very similar to your Tacoma. I watched your channel, trips and mods from almost the beginning. I’m a little behind all your mods on my truck but really like this Vos model because it’s relay and not solid state. I’m an old school electrical engineer just like the relays that you can replace if needed. Even I’d I don’t win, I’m going to get one, so thanks for yours and Vos discount code. Keep the vblogs coming and safe travels.
I’ve spent the past few weeks trying to find an SPod alternative and this looks like the ticket. Would love to use this on my 4runner build to manage all my lights!
Great job on the video, looks like it is a well designed and useful piece of equipment. I would love to put this to the test on my Jeep. My electrical system certainly needs an upgrade like this.
The VoSwitch looks like a great option for adding switches. I'd add this to my Tacoma for all of my accessory lighting!! Great Vids!
I really have been enjoying your channel and the Taco Tacoma. I am a Navy Veteran and single father of a daughter and since the pandemic I have bought a 2019 TDR 4x4 Off Road. I have a nice OVS tent and Yakima rack. I definitely have not updated and lights yet and really am going to get a three T Pam and then I would love to get a solid switch solution. I know that if I win I would do a lower mount but enjoy where you placed it. I would really like to take my daughter out and just go off grid for a few days or be able to roll into a camp site lit up better. Keep doing what you do sir love it.
I need this switch to add more lights, I’ve used all the factory holes, and added the cubbie switch cover. Great ideas in your video.
The biggest selling point that isn't brought up here is the simplicity of the circuitry. Everything within the controller is easily maintained should a component fail, much more user friendly than the integrated circuit boards of the sPOD units, and a fraction of the cost. Getting ready to upgrade the lighting system of my 2014 Power Wagon and this Voswitch system seems to be just the ticket. You've made me a believer Kelly, thanks for the video...
Or a flux compositor
Great video. I like that there's a non-bank-breaking option out there. If I won the Voswitch I'd use it on my 2020 Tacoma for bumper light bar, ditch lights, and rock lights.
Having one location for all of my light components would be awesome. Definitely would connect my rock lights and even a future air compressor. Thanks for the video tutorial and ride on.
I'd get the meso customs pocket/cubby and put it in the dash near my left knee. It would run myihht bar and chase lights for now and probably ditch and rock lights down the road!
Great video as always, definitely will be referring back to it when I do my next wiring project.
Great video, as usual. I appreciate your work here on the channel and on Trail Tacoma. I've used several of your videos for various mods. The VoSwitch would be a great addition to my first Tacoma. I can't wait to add lighting and make this great truck even more capable.
I will use it in my overland build. Im also using your video for the Eibach suspension install. Thanks for the instructions.
I would definitely install this onto my 2019 Tacoma Pro! Great video and very thorough with the install!
Adding one of these to my 17 Tacoma would be awesome ! Would definitely help with all the off-road lights I have
I got the Voswitch for my 2008 4Runner, and instead of screwing it to the Fuse Box lid, like many do. I got some 3M, industrial strength, double loop (velcro type) fasteners.
Been looking for a accessory controller and this right up my alley since use the ram mount system for my dash. Thx for the info!
Awesome install video and giveaway, keep the videos coming. I'm going to be installing a front bumper and roof rack also rock lights in the next few months. I have been looking at ways to hook my lights up when installed this seems perfect.
Definitely need one. I have some lights and my wiring looks horrible. I have cables all over the place and looks embarrassing. Like watching you built 👍🏽
Thank you very much.
Looks like a good alternative to spod. Hope it works well long term..will install on my 19 4runner for lights
Great install video. I'd put this on my brand new Tacoma to help with all the lighting I'm getting ready to install.
I will be adding the Voswitch to my Chevy Colorado. I plan to add the touch panel bezel mounted in the center console between the USB and 12V ports. Thanks for the great video.
I’d put this in my 21 Canyon AT4. Currently building the rig for some weekend warrior trips in AZ. I’d run lighting, winch, air pump and maybe a couple other camping equipment in the future.
Outfitting my Ram Rebel with a bar light, fridge, ditch lights, rock lights and area lights. The =voswitch control would make a great addition.
Our new 2021 Tacoma has lights mounted but not hooked up yet. 😂 So this would be perfect and perfect timing! Great video!
Thorough install video as always but forgot the bloopers lol!
I’d love to have one of these to add a hidden light bar and trail lights on the back of my taco. My hood will definitely look cleaner with this VoSwitch. It’s already a mess with just my ditch lights and grille lights!
Great vid! This switch would motivate me to install my rock lights sitting in my garage!
I just bought a 2019 Tacoma and just started following you excellent description on how to install all the accessories your doing .
I would start and add lots of add ons with that switch if I’m the winner.
I would use it with my 20 off road hoping that it would make life easy connecting different lights and accessories. car wiring was the one thing I never learned.
Great instructional video for the Voswitch on YT yet...Great vid! Cant wait for the relay hook ups instructional video. I have to have one for my 84 FJ60 Land Cruiser. This will be great for the accessories I want to add.
I just got a Tacoma and I would like to put lights around the truck and this will be very nice to have.
Building out my truck now. '20 Pro... It would be nice to be able to add or subtract lighting or any other features without any real wiring hassle. Nice simple upgrade.
Would be an awesome addition to my Tacoma! Planning on adding more lighting so this would be great. Thanks!
If you’ve ever pulled cable electric tape works just fine when fishing the wire
Adding one of these would clean up the rats nest that is currently in the engine bay. Awesome video Kelly!
Great video and clean install. This VoSwitch will be perfect for my future light plans on my 2019 TRD Off Road 🤙🏼🌮 👍🏻
I would use it on my 2019 Tacoma--have a light bar, ditch lights, fridge and a bed light. Would be awesome! Plus, most dont mount like this. Using a Ram mount is awesome
I would use the switch for my 2020 Tacoma which currently has only one blank to put a new switch in so I would need to get one of these in order to run all the lights I’m getting for the bumper, roof rack, ditch lights and chase lights. 🤘🏽 great video as always!
I have been looking into a power management system like this for use on my Off Grid Trailer, Expedition 2.0. I want to re-route factory wiring for water pump, on demand water heater, and task light to the fold down kitchen where it can all be controlled from one location as needed.
I would use the voswitch for controlling the hidden grill bar rock lights and additional lights i intend to add to my cap along the side and back
Very cool, the price point is nice to. I would add some scene lights and ditch lights to my 2020 trd offroad.
I was going to comment regardless of the drawing to tell you what a great job you did on this video! I need one of these for my 2017 Taco for my Air compressor and light bar!
I’d love to have one of these for my Tacoma build. It’s just getting started, could use all the help I can get. BTW your videos have been an inspiration, win or not please keep up the great videos. My two kids and I enjoyed your Hell’s Revenge
Nice job Kelly. Well explained and presented. My 2020 Sport is bone stock so no need for a VO box yet.
Thanks again. Bone stock is just a lot of room for improvement!!!😂😂😂😂😂
I would wire it up in my 2020 Tacoma. I have a topper with Prinsu racks. I would put "perimeter" lights on each side and probably amber chase lights in the rear.
This would be great for my ditch lights and hidden lightbar probably hook up my led whip for the dunes. Nice video
Thank you very much!!! It definitely will.
I've been looking for an SPod alternative to add to my offroad rig set up to manage my lights and accessories.
I'd put it in my 2019 SR to control fogs, light bar, bedlights etc. Thanks!
I would use the VOSWITCH UV 100 to hookup more lights for the exterior of my Tacoma. Having all the lights in a one stop control panel would be awesome.
Great install and info on this product!
I'd use this system to clean up my rat's nest wiring in my engine bay and would allow me to add more lights to my truck and less switches, it would look a lot cleaner in the interior.
I’d be interested to see how this compares to my current light switching setup. His seems like a good budget minded option to compete with the switch pros. I’ll be looking for that 6 month review to see how it holds up!
Good job on the install, was there any room to turn the Voswitch 90 degrees so that wiring the accessories might be easier. I could use the switch for for some ditch lights i want to install, could also move my backup lights and a light bar to clean up some stuff.
This would be the foundation for all wired lights, winch, and compressor in the future! Thanks for the giveaway!
Great video! Looking forward to your 6/12 month review!
Awesome video. Putting this on my Tacoma wish list.
Nice to see the DIYer using CAD....
Cardboard
Aided
Design
Recommend using the P/OUTLET#1 fuse to steal power. That's the "cig lighter" and it's NOT tied into the CAN BUSS system. Pretty much makes it a stand alone system that can't mess with any of the many ECU's in the new trucks.
Great idea. Thank you very much!!!
I love this for my taco thanks.
A well edited video, nice work.
I would install it on my 2016 TRD Pro Tundra that we are getting started on doing an overland build setup. So far I have a grill light bar and a set of ditch lights (not installed yet lol)
So glad I waited on purchasing the SPod for my 2019 TRD Pro build. Just finished phase 1, Alpharex headlight upgrade, Lasfit lighting upgrade, interior lighting LED upgrade, and in-dash touchscreen Android head unit, sound system upgrade. Phase 2 just started with the Gobi rack, side and rear lighting, Genisis Off-road dual battery setup, and an ICS shelf for mounting tablets, and what's now going to be the #VOSWITCH switch panel!! Thanks for the video!
I would love to put the Voswitch in my Jeep JK! I have a Vector Off-road bar that would be a perfect match to mount this switch to! I would even make a video of the install as well!
Add ditch lights and rock lights for sure.
“Better?!” “Uhhh sure?!?” I need this kit to avoid this moment!! Hahaha!
I'd put it on my 2016 trd off road, for pod lights and soon rock lights
This will help me with my overland build for my 2021 trd or.
This would be a good mod for my 2018 Tacoma it would clean up all my wires
This would help clean up all the switches on my dash of my TRDOR
Clean up my wiring on my combo light bar and future rock lights/chase lights 👍🏼
I'd use this on my 2020 OR to control my excessories with less wiring mania.
This would be great to add more lighting on my 2020 OR. I've done a lot of same mods because of your videos. Appreciate you doing this giveaway. 👍
Would be a great addition to my wife's 4Runner . Slowly trying to outfit it for her. Give my fj a rest and use her vehicle occasionally.
Hello, I could use a switch system to add my ditch lites and remove winch from jeep to put on the tacoma.
Solid piece that would delete all my random light buttons around the dash 🥴 clean up the mess
I would use it to consolidate all my switches for my forward lighting
I'll install it on my new 2019 tacoma, I've been searching for a switch system for my taco.
Will the panel still work without the truck being turned to accessory?
Great install video! Did you use the provided add-a-fuse or did you swap out for the low profile fuses like you would find in the engine bay fuse box? Also what size fuses did you use for the add-a-fuse. Thanks
I ended up using a factory add-a-fuse and then getting the Meso Customs extended fuse block cover.
I would add that VoSwitch to my 2020 Ram Rebel so I can mount some Rigid lights to my rig.
VoSwitch would help cleanup my wiring mess under the 4RUNNER hood.
Adventure built did you ever end installing the buss bar?
I'd install it in either my 2019 4Runner TRD or my 99 Trooper with it's mile of crazy wiring for 16 lights. LOL
I need it so I can start lighting up my life!
How's your 1st month feeling on this unit? It seems to be more budget friendly but that doesn't mean more reliable. Thanks and keep up the great videos.
Looking for one of these for my 21 Tacoma
So worth it. Hasn’t failed me yet!!!
Installing today on a 4Runner..
How did the install go?
Waiting in the follow up. Great videos!
Very soon.
Have a question. I just got this switch I know you tie in the positive side of the accessories into the box but where do the negative leads plug in at? The directions don’t really say. Thanks
The negatives go either to the negative terminals or a negative mount somewhere on the body. I put a 10 terminal bus bar to ground everything to. It works great.
I wanted to order this from their website and use the discount code you provided, but according to my web security, its not a secure website.
Are those wheels and tires in the background a new setup you are going to be running? The KM3 is a great tire but personally like the toyo mt more! I’m guessing they are going on the new project you recently posted?
I’m actually doing some tire testing. I’m putting the KM3 on the Tacoma and the Toyo MT on the Land Cruiser. Doing a little 35” tire side by side comparison.
Winning would allow my Tacoma to control the power of the sun!
So no joke, I just joined the Tacoma owner's club! Will it work on a 2010 SR5?
I'd use this to get a great start on many of my future build plans.
Connect all the lights!
Great install video! Just one question regarding accessory installation. With the lack detailed of wiring instructions in the kit, where did you hook all your ground wires to? Unlike the expensive SPod (that have pos & neg terminals) the Voswitch only has a positive connection terminal inside the unit but nothing for the accessory ground wires.
Thank you and Great question. Next to the battery on the fender is the name ground wire. I ended up running a fuse block to the ground wire and connected all the negative terminals into that. It’s really clean.
@@AdventureBuilt I just received my Voswitch and I am planning my installation as was thinking of adding all the ground wires to that very spot you mention. I don't have the capability to make a fancy tray as you did, you have any other suggestions for the viewers?
@@Impalals2001 I would say the only other place to mount it easily would be on top of the fuse box however it would make accessing your fusing difficult. I wish I had a better answer for you. Fabricating a plate is really the best answer.
I want the VoSwitch UV100 to clean up my wires and make my rig look good!
Kelly, Hello from a fellow "Zonie". Would love to have that VoSwitch for my 2020 Cement Gray Tacoma OR (longbed though). Do you know of any prebuilt mounts to put it the engine bay that might work? Love your videos. Keep 'em coming.
Thank you very much. Message me on IG and we can chat about the mounting plate!!!
do you have to power that up every time you start up the truck? Looks like a power button in the center of the switch panel?
Great question. So you can turn the switch panel off or leave it on. If you turn the truck off with the switch panel on it will come back on with the vehicle. And same goes if you have the switch turned off when you turn the truck back on it will be off. It’s pretty darn cool.
@@AdventureBuilt thanks, considering this for the taco and or my old fj55 since it has no room on the dash for original switches.
It’s been almost a year! How do you like the location you chose for the switch panel? Any issues?
It is awesome. Not a single complaint. The switches haven’t come loose. I’m really impressed!!!