The first thing you need to warn the customers/viewers is "Never turn the gimbal on without mounting a camera on and balanced first". Turning the gimbal on without camera or turning it on with locked motors can damage the gimbal. It only takes a few mishaps to damage the gimbal.
On the 28-75mm Tamron zoom lens the focus ring is actually the back ring. You have the focus wheel on the zoom ring. It's actually really hard to use that lens with the Weebill S.
This video has saved me. I cannot thank you enough for being so to the point and keeping it simple for beginners. I can’t wait to hear and see more from you!
One question please do I have the sony a6400 back on weelbill s Is it possible to have electronic zoom from the wheel without having to buy the servo motor? How Can I? On the zhiyun weebill compatibility list page I see that I can no longer do it
Can u make a video about using electronic zoom/focus using the wheel (without any motors or other accessories) and which cameras are compatible for that
you didn't finish explaining at 7:37. you said "Awesome" and i'm like okay ??? you show no indication or demonstration on how the last axis should look once balanced correctly.
I think the same Issue, i didnt understand as well the last axis and the first time that i used this Gimbal the battery got down in only 2 hours, that was so confused to me, then i learned that i didnt okay because i saw your video, please delete this video.
OK, now that everything is balanced and I turn "ON" the unit and start using it then I decide to disconnect the camera from the gimbal and use the camera on my mono pod but then decide to reinstall the camera back to the gimbal, would I have to balance everything all over again?
I am connecting my phone to the Weebill S but no image from the camera is shown. The camera is connected to the Weebill S but the camera cannot be manipulated from the phone. Sony a6400 v2.0 Weebill S v1.95 iPhone SE iOS v13.3.1 ZY Play app v2.8.6 (462)
Do y’all power down gimbal when swapping out lens or just standby? I power off but just curious what everyone else tried. Can’t find this answer online
Hi, My weebill S dosen't work properly, the orizion (tilt) isn't perfectly right, also i check it on the digital horizon on my Sony screen and it's confirmed, i've already balaced prperly my weebill S more than one time and in different way but i have the same issue, my weebill S is new
My Weebill S constantly pans to the right when walking in a straight line (push/pull shot), no matter what the settings. I also get horizon drift, and overall, the gimbal rarely returns to centre. I am familiar with calibration, autotune, latest software, and tweaking all the settings, but nothing works. I still own the Crane 2 and never had this issue.
Hey with the Weebill S, when using the zoom motor does the tilt access automatically balance or would it have to be rebalanced after zooming in or out? (Since the lens will come out or retract causing inbalance) 🙏🏽
thanks so much for this, if anyone can help me with this question. can i use the servo focus on a manual lens with my a7sii without pluggin in the camera connection cable. or is it necessary to have compatible camera connection to use the focus feature?
Yes it should work fine if it’s the motor from the weebill lab. I do not have the one from the crane 2 and that was a different motor, so I do not know. The correct motor would accept USB-C input.
My gimbal is crane 3 it's some problem .....it's mode is changed., Power button 2 times prees it was change the mode and another one time press the button coming the regular mode but
Hi Brett, thank you so so much for this very informative video. I've always wanted to buy this gimbal, but I was afraid if I was able to learn how to use it. Thank you!!!
Just got my WEEBILL S today and after updating the software two of the three motors are making wired sounds like they are struggling. Is this odd? I think to return it :(
Before you do, make sure you have perfectly balanced your gimbal. Then run the auto-tune function for motor strength, or select the appropriate strength for your setup. Also try doing a power cycle by powering down, take the batteries out for about 15 seconds, put batteries again and power on. Hopefully this helps out!
The first thing you need to warn the customers/viewers is "Never turn the gimbal on without mounting a camera on and balanced first". Turning the gimbal on without camera or turning it on with locked motors can damage the gimbal. It only takes a few mishaps to damage the gimbal.
On the 28-75mm Tamron zoom lens the focus ring is actually the back ring. You have the focus wheel on the zoom ring. It's actually really hard to use that lens with the Weebill S.
This video has saved me. I cannot thank you enough for being so to the point and keeping it simple for beginners. I can’t wait to hear and see more from you!
yes, my TransMotor Focus/Zoom windows 11 keeps throwing up a USB not recognised when attaching it to update firmware
How to call those strap holders red for your camera. Where can I buy one?
One question please do I have the sony a6400 back on weelbill s Is it possible to have electronic zoom from the wheel without having to buy the servo motor? How Can I? On the zhiyun weebill compatibility list page I see that I can no longer do it
Can u make a video about using electronic zoom/focus using the wheel (without any motors or other accessories) and which cameras are compatible for that
Mine arrived missing the screw in the quick release plate???
My weebill s arrived without the 2 in 1 quick release so have no where to connect the focus puller and can find no where on the internet to but it !
you didn't finish explaining at 7:37. you said "Awesome" and i'm like okay ??? you show no indication or demonstration on how the last axis should look once balanced correctly.
ya i got stuck on this too, kinda annoying ngl
I think the same Issue, i didnt understand as well the last axis and the first time that i used this Gimbal the battery got down in only 2 hours, that was so confused to me, then i learned that i didnt okay because i saw your video, please delete this video.
OK, now that everything is balanced and I turn "ON" the unit and start using it then I decide to disconnect the camera from the gimbal and use the camera on my mono pod but then decide to reinstall the camera back to the gimbal, would I have to balance everything all over again?
hello I have your same configuration but to balance a zoom lens well it is better to bring it to the focal length of the middle.
wow great video, thanks a lot, can that zoom motor be used for aparture ring in weebill S, please let me know?
Is it possible to control the FF motor within the Zy play app?
You didn't explain how to balance the pan-axis very well. How is it supposed to look when balanced?
should I remove the plastic cover on my battery?
i connect my camera canon eos rebel t7 with the gimbal and my camera wont turn on or anything just black screen
I am connecting my phone to the Weebill S but no image from the camera is shown. The camera is connected to the Weebill S but the camera cannot be manipulated from the phone.
Sony a6400 v2.0
Weebill S v1.95
iPhone SE iOS v13.3.1
ZY Play app v2.8.6 (462)
Does the zoom and focus motor also comes in the weebill S box??
all is great but it wont write on 2 sd cards on my a7ii :(
Do y’all power down gimbal when swapping out lens or just standby? I power off but just curious what everyone else tried. Can’t find this answer online
When is the calibration video coming out?
Great video What music is that in the background can u share the track thanks
Hi, My weebill S dosen't work properly, the orizion (tilt) isn't perfectly right, also i check it on the digital horizon on my Sony screen and it's confirmed, i've already balaced prperly my weebill S more than one time and in different way but i have the same issue, my weebill S is new
My Weebill S constantly pans to the right when walking in a straight
line (push/pull shot), no matter what the settings. I also get horizon
drift, and overall, the gimbal rarely returns to centre. I am familiar
with calibration, autotune, latest software, and tweaking all the
settings, but nothing works. I still own the Crane 2 and never had this
issue.
Hey with the Weebill S, when using the zoom motor does the tilt access automatically balance or would it have to be rebalanced after zooming in or out? (Since the lens will come out or retract causing inbalance) 🙏🏽
HI is it possible to connect Weebill with Fuji X camera ?
thanks so much for this, if anyone can help me with this question. can i use the servo focus on a manual lens with my a7sii without pluggin in the camera connection cable. or is it necessary to have compatible camera connection to use the focus feature?
max verstappen?
Hi, does the zoom/focus motor comes in the basic package or it has to be purchased separately? Thank you.
It doesn't so you have to buy it separately
You make the video transmitter video for the S?
Just out of curiousity, does the servo follow focus for weebill lab/crane 2 is compatible with the weebill S?
Yes it should work fine if it’s the motor from the weebill lab. I do not have the one from the crane 2 and that was a different motor, so I do not know. The correct motor would accept USB-C input.
My gimbal is crane 3 it's some problem .....it's mode is changed., Power button 2 times prees it was change the mode and another one time press the button coming the regular mode but
It was not coming regular mode there was only sleeping mode
Please release the videos you mentioned A.S.A.P.
Thanks, well explained as usual .
Hi Brett, thank you so so much for this very informative video. I've always wanted to buy this gimbal, but I was afraid if I was able to learn how to use it. Thank you!!!
Is it works Panasonic G85 camera or not, If not what can I do?
doesn't work for me
Excellent! Thanks for the info!
Hey hey no problem. Info is what I do.
Infosmercial what percent is info and what percent is smercial?
Thx! Great info and pleasant to watch. :)
very nice
hi nice video plz upload video for zyplzy app with S
Just got my WEEBILL S today and after updating the software two of the three motors are making wired sounds like they are struggling. Is this odd? I think to return it :(
Before you do, make sure you have perfectly balanced your gimbal. Then run the auto-tune function for motor strength, or select the appropriate strength for your setup. Also try doing a power cycle by powering down, take the batteries out for about 15 seconds, put batteries again and power on. Hopefully this helps out!
Thank,help me a lots....
Your welcome. I’m glad it helped you out.
Sadly I didn't check it's not suport my nikon.d5300. Guys check before buy :)
You buy gimbal first of all for smoothness not to control your camera through it..
Anybody try it?