Holy crap this is excellent. Watching these things actually work. Im getting these installed this week. I jave yhe whole yakima swing base system and there is major sag with yhe swing alone. Hopefully this remedies the sag. Thanks etrailer!
Whenever you torque suspension bolts, you should have the weight of the vehicle on the suspension to have it in it's natural position. If you torque the bolt with the suspension drooping, the bushing(s) will be in a bind and more likely to tear. You should always paint anything you drill through too. You don't want your lower arms rusting out.
Good, I've been looking at these for my Ody, I will be carrying a mobility scooter, and figure that I may use a hitch carrier for some cargo, and wanted to see how this was done. Nice job running it into the fuel door compartment!
I didn't buy it until I put 17 inch wheel with big tire on it... it's raise up 1 inch so with 4 people in the back yes it's hit fender over bump... so I guess this air bag can help... can wait to it arrive on Friday ...👍👍👍... I'm not sure how long this air gonna last...
Your situation is what these air bags where designed for. They will help greatly to support the rear end of your van. www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Great video! Ill be picking some up from your site soon! You wouldn't reinstall the bump stop? Do you at least replace the bolt you took out or does the airbag completely replace that?
The air bag assembly will completely replace the bump stops. There is no need for them any more. You may want to hang on to them in case you decide to remove the air bags at some point. www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Most of the other people on e trailer warm up the tube with hot water before attaching them. Is there any advantage to that? He seemed to get it over the valves just fine without warming the tubes.
If you are having trouble installing them, you can warm them up but I would say for most installs you will not need to do this. www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
We have both available in the following links to our website. www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html www.etrailer.com/Air-Suspension-Compressor-Kit/Air-Lift/AL25980EZ.html
Holy crap this is excellent. Watching these things actually work. Im getting these installed this week. I jave yhe whole yakima swing base system and there is major sag with yhe swing alone. Hopefully this remedies the sag. Thanks etrailer!
You're very welcome, what kind of adventures are you planning?
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Whenever you torque suspension bolts, you should have the weight of the vehicle on the suspension to have it in it's natural position. If you torque the bolt with the suspension drooping, the bushing(s) will be in a bind and more likely to tear.
You should always paint anything you drill through too. You don't want your lower arms rusting out.
Good, I've been looking at these for my Ody, I will be carrying a mobility scooter, and figure that I may use a hitch carrier for some cargo, and wanted to see how this was done. Nice job running it into the fuel door compartment!
Thank you, we're glad the video was helpful!!
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Excellent instructions. Thanks.
You're very welcome, we're glad you found the video helpful!
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Great work bud!! I'll be installing my today🖒🖒
Thank you so much for this video!!! Putting these on a 2008 Honda Pilot today. Doesn't look to bad!
We love hearing this! Thank you for sharing. It's not too bad of an install.
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
I didn't buy it until I put 17 inch wheel with big tire on it... it's raise up 1 inch so with 4 people in the back yes it's hit fender over bump... so I guess this air bag can help... can wait to it arrive on Friday ...👍👍👍... I'm not sure how long this air gonna last...
Your situation is what these air bags where designed for. They will help greatly to support the rear end of your van.
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Great video! Ill be picking some up from your site soon! You wouldn't reinstall the bump stop? Do you at least replace the bolt you took out or does the airbag completely replace that?
The air bag assembly will completely replace the bump stops. There is no need for them any more. You may want to hang on to them in case you decide to remove the air bags at some point.
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Shpuld have used a rubber grommet in the hole where the air line conmects to less of a chance for air line to get cut
Most of the other people on e trailer warm up the tube with hot water before attaching them. Is there any advantage to that? He seemed to get it over the valves just fine without warming the tubes.
If you are having trouble installing them, you can warm them up but I would say for most installs you will not need to do this.
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
Won't the springs rub a hole on the airbaggs?
Do they have the same kit but with a controllable with a remote compressor??????
And if airlift does have it what’s the part number and the price
We have both available in the following links to our website.
www.etrailer.com/Vehicle-Suspension/Air-Lift/al60815.html
www.etrailer.com/Air-Suspension-Compressor-Kit/Air-Lift/AL25980EZ.html
What is the total install time?
Dónde compro esas bolsas las mías están tromadas
The idea is good, but it was executed absolutely unprofessionally and naively.
How so?