Regrinding a Camshaft - Behind the Scenes @ Crower Cams
Вставка
- Опубліковано 19 сер 2024
- A long forgotten hot rodding trick is to perform a camshaft “regrind.” In this video I go behind the scenes at Crower Cams & Equipment for a step-by-step walkthrough in the budget friendly trick of yesterday.
Big thanks to the folks at Crower for taking me behind the scenes of the coolest shop in town. @crowercamsandequipmentco.i7594
#mopar #projectcars #dodge #dragracing #hotrod #musclecar #dodgedart #machining #hacks #budgettips #budget
Cool video. Bruce Crower would pour aluminum in coffee cans to machine into pistons according to my dad. Later, my father-in-law worked with Dave Crower on original Crowerglide clutch.
When I was in the Navy stationed in San Diego in the '80's me and one of my car guy friends from the ship would just drive down to Crower and pick up the cams directly. This was when they were in Chula Vista. Really nice service and quality. He had a '69 Chevelle SS 396 which ended up getting stolen off base. The base cops told him it was probably in Mexico, they 'lost' a lot of cars from the base.
Awesome video. You killed it here my friend. Good advice for budget building, great tour at Crower, a little bit of history, just a very well rounded video... Nicely done, thanks for sharing😁
Thanks! Put a lot of time into this one. I’m really excited to reassemble the 318 and fire it up.
@@sorta_stock We'll be watching my friend👍
This channel deserves wayyyy more subscribers. Thanks for the video!
Thanks man! Pushing hard to reach that 1,000 milestone
ARe any of the old timers ie Dave still there? THey always give the best recommendations
Hope they keep all their old lines of V8 cams around they all worked great. I prefer a grind # so I can research all the specs....many of us will ignore a cam thats callled stage xx
Very nice camshaft.
Alot of bang for the buck.
Nice that they stopped and did that.
Crower is a great company.
Just got a solid roller from them for a 557 Ford Mud drags truck.
Beautiful camshaft.
The cam you got looked like brand new.
Thanks for sharing.
Take care, EM.
Very cool to see! I'm about to send them my Honda F22a6 cam for a turbo regrind. Excited to see what they churn out!
dope
Those guys are great. Nice job on the video.
After this last experience, I’ll be going back to them on the regular. Excited to hear that new exhaust note.
274/274 @50?! damn...I got a 220/230 @50 regrind for the 360 Magnum in my 71 Dart I also picked up a set of Pac springs so, I'd imagine you'll have to address those as well.
He's talking about the lobe lift being .275. I've heard that the stock Chrysler Magnum cores are pretty good so that should go on there very easily especially keeping the stock lobe separation.
Nice tour !! See ya at FABO
Does anyone know wire miss fire goes away at higher RPM even though you have a bad camshaft