WHEEL SPACERS - ZL1Addons
Вставка
- Опубліковано 18 вер 2024
- WHEEL SPACERS - ZL1Addons
Should you add wheel spacers to your car? Let me know what you think in the comments...
To purchase the ZL1Addons wheel spacers goto:
ZL1Addons.com
Recording equipment I use:
Cannon 77D DSLR: amzn.to/2NGdsGx
iPhone 7 Plus: amzn.to/2EeCxre
SJCAM SJ7: amzn.to/2Ebg8uF
BOYA Lavalier Mic: amzn.to/2GKN0Zw
BOYA BY-MM1 Shotgun Mic: amzn.to/2GGOkN4
Battery Video LED Light: amzn.to/2ECzA1d
Driving iPhone Mount Vlog: amzn.to/2EbYXJj
Handheld Stabilizer: amzn.to/2FIhJoL
Please be sure to like and subscribe so you do not miss the latest updates.
Website: OnlineCarShow.net
Instagram: @OnlineCarShow
Twitter: @OnlineCarShow
Donations Page:
www.gofundme.c...
Thanks for watching and supporting!
ZL1Addons ZL1Addons.com Camaro Corvette Wheel Spacers Spacer Honda Bad Good #OnlineCarShow #WheelSpacers #ZL1Addons
Please let everyone know, in the comments, your experience and/or feelings about wheels spacers...
Very nice. It is funny how people are scared of spacers. I do not get it. It can make a complete difference in how the car looks
Yeah and a couple mm is nothing. Had them on two cars and zero Issues.
I ran spacers on my F -body for a long time.... they work
Had them on my 02 TA 👍👍. Just make it look more aggressive
Beautiful car bud .do u have a link for your black out back tail lights makes a big difference I have a 2018 camero.ty
GMPartsHouse.com. I recommend reaching out to them on email or instagram. Tell them I sent you and they will give you a discount 👍👍
Enjoyed the Video! 👍😎
I’ve used spacers for years without issues
Do you race with them?
Another great video where did you get those taillights?
GMPartsHouse.com. Or @gmpartshouse on IG
Small
Details that add great look. Good job james
Thanks man. Think it brought it out just right. 👌
Im going to follow your tip again Thanks.
How’s the suspension holding up with those springs you installed a while ago?
Actually really good. They settled all the way I think by now and loving the look and ride
James....just got mine yesterday. Winter tires and rims rub just a bit.
Yeah should allow me to go 315 or even 335 on some brands. 👍👍
Nice
Thanks
great info as always James. whats your opinion of your louvers now that you have had them for a while.
I like the looks more and more to be honest. Especially since adding rocker panels. I will say all the double sided tape eventually wore off and over time I replaced all with goop and it’s still holding strong.
thanks bud, ill have to get some goop so im ready, rocker panels ?
What size of wheel spacers did you get? I have the five's. I didn't hear it in the video. I had to use them because I'm running 5th gen wheels on my 6th gen and it looks perfect now
Went with the 3mm. My buddy has 5mm on his 6th gen. They work perfect on his z28 wheels too
Which 5th Gen Wheels on your 6th gen?? I have a 6th gen too and think the wheels look so much better...
@@yvettek111 These are the MRR - M228 Black and they work just fine
@@OnlinecarshowNet1 any rubbing issues???
I want to buy spacers for my 2017 Canaro Rs, the ones I can get are 1.5 inches , but I do like to run and tale corners fast, but I dont wanna die, what are the risks, pro and cons of spacer ?
Well additional length stresses suspension and axles. Also risk of breaking mid corner. Pros really is just looks.
Are you running any spacers In the front and if you are how much?
I didn’t run the front spacers but knew plenty who did. Legally speaking I can’t recommend you to do either size to your car. But I’ll put it this way... I know plenty of Camaro guys/gals that are running both spacer sizes in front without issues... as long as tires don’t rub turning wheel
I have a 2018 honda pilot and the wheels made with the car are like under the car if you get what i mean, they dont balance out on the truck like i would like....so my question is should i use wheel spaacers or do i need wider more sportier tires to balance out the look of the truck.....thx in advance for your answer and advice....you can look at any video on youtube on how the 2018 pilot looks with the wheel base under the car and you'll see what i mean
Depends on how much your needing. 3mm on camaro in rear flushed me but I know people that went 5mm. I wouldn’t go beyond that. After going beyond that is safer to replace wheels and change the offset from stock
Yeah I know what your saying. Camaro was same in rear just not as extreme.
@@OnlinecarshowNet1 Ok thx
Well I do believe the zl11le already is spaced in the front and they race it as long as you don't go over six you can race with those if you have 7 to 10 turns you're fine on the lug bolts
What if I put 5mm in the front and 3mm in the rear ? I have the stock setup that are on the 2018 LS models with the 245’s and the 18” wheels, is it still safe ?
I would think you’d want that setup flip flopped to get rear tires more even with front. I can’t really say it’s safe because that opens me up to legalities. I can say no one has had issues I know of with 5mm or 3mm. I know plenty of cars with them and no one has ever said they have a problem. Hope that answers the question.
OnlineCarShow yeah no, I see what you mean, I just really wanted like a track stance lol... but yeah if everyone hasn’t had any problems so far then I’m all set! Thanks man !
OnlineCarShow one last question lol, am I gonna have to check torque frequently? Since essentially it’s just a slap on lol
I have the 5mm on my rear wheels, no issues
😬 thanks for sharing bud. Yeah know 2 people with them on their car and said no problems at all 👍
Yes sir, it’s a great product. Like you said, I wouldn’t race with them on, but it gives it the look I was going for and fit like a glove 👍🏼
Did you add them to all 4 tires?
Where did you get your wicker bill?
Did you say "be sure to put your lug nuts on extra tight"..!!?? How about just the lug nuts on to factory specs.
I know what your saying and I should have used a torque wrench. I used to bust tires for Super Shops in High School and College so I can appreciate what you are saying. Over tightening can damage lugs. I just was trying to emphasize you want to be extra sure you have them on tight with no lose bolts using a wheel spacer. I stopped using wheel spacers altogether now though. Heard too many horror stories related to them. Thanks for your input and Ill try to at least explain in the future, to get perfect use a torque wrench and recommended lug torque for your vehicle.
3 mm? I'm about to add a 51mm spacer to my camaro
MAKE sure u get an alignment done after u put ur spacers on.
Yeah I will after I install these toe rods.
I did lifetime alignment deal through brake check. Only cost 4.99 each alignment now. She’s been 3 times in the year I’ve owned because of springs and suspension gooodies
@@OnlinecarshowNet1 good. i added these spacers from zl1 addons too,which are great btw. i added them to the rear and after a month it threw off my alignment. when i took it in. my rear was off.
5 mm is nothing.
Yeah especially with camaro. Some reason the lugs have 3-4 more turns with camaro over corvettes anyways. Corvette 5mm probably be sketchy but on camaro it’s totally fine.