I just went with some Eibach lowering springs on my 21. Absolutely no body roll now and looks amazing. Also you can fit 315 in the back try the r888r’s the grip is insane.
Love the car build so far and either ZL1 wheels or 1LE are great (I bought 1LE for mine). I would never compromise safety for 3-5mm wider stance and the extra stress you are putting on the wheels and suspension, just don't use spacers! Gas cap is good, I am also thinking of doing the same (I have the Riverside Blue body colour with all black accents).
My stock wheels has R888R’s with the rear having 315. The steering wheel gets stiffer than normal & the grip, of course. Currently I’m running on MRR M755 black wheels with M. Pilot Sports 4S. Decided to go taller to fill gap didn’t want to modify the suspension. Front 285/35r20 & rear 305/35r20. Looks amazing. This setup am using 5mm & 3mm for the rear. I’m looking into getting 315/35 Nitto’s for the rear. Take your time
Keep checking wheel torque...... Very important when running spacers. Plus , here is a helpful hint for track rats Most tracks will not allow wheel spacers When Passing through Tec inspection . Just an FYI.
I'm not a fan of the cap either but as long as you like it, that's all that matters. You mentioned about having too much black on the car but u want to do black ZL1 stickers? You also mentioned about making your car yours, unique so with that said, i wouldn't go w/a stock wheel and go w/aftermarket wheels. And most important, you should lower the ZL1, the wheel well gap is throwing off the stance. I can't remember if you talked about lowering it but it's a must. Looking fwd to this build!
I’d go aftermarket wheels. A lot of options for some seriously good looking stuff out there. And can make it look different from the other 2 stock options
Keep the stock rims and just go with bigger tires, they will really fill up the whole fender! I went with stock rims in PVD Black Chrome and they look amazing! You can never have enough carbon fiber!
Don’t go with black ZL1, look for something different, if you don’t mind go all red. If you can find one go all out and get a gun metal finish and red 💯
Hey there - nice video like the wheel spacers. On my 2017 Z06 I went with 6mm spacers on all 4 corners and I lowered it 3/4 of an inch. Looks great in my opinion.
Wheel spacers are not a good idea at all, they add load to the axle and extra load to the power steering. Plus way too little threads holding the front lug nuts for a performance car.
I got 2021 just like the one on my profile pic And. I really like putting spacer what’s your recommendation or advice for me for the size or the kind that I need to use Thank you
You should’ve removed the 2 bolts behind your brake pad,the 34mm and then you can pull the front strut outwards a little to help. The bolt has like 5 mm of play
Random question; I haven't seen the previous few videos of it was already answered, but did the Quick Jack kinda fail due to user error or manufacturer defect? Pretty important to report to Quick Jack if it was a defect :0
You can check out the previous video for the full explanation. QuckJack lift works perfect, the rubber blocks they provide begin to deform/flex when you have a vehicle up on them for a few hours.
I usually like your taste in mods but I have to say it....that gas cap doesn't fit in my opinion. It looks like it's straight from AutoZone and reminds me of an overdone V6. The car is turning out nice though
Dude! What do you do for a living to afford all those vehicles and mods! Just jealous. 😆 And that jack...wow. The wheels...? I don't think spacers made a whole lot of difference. Also. I'm confused. Are you in Hawaii or Texas?
Moved to Texas about 2 years ago. Started the channel back home in HI, so older videos are based there. The UA-cam channel (your views and support) actually funds everything I do on the vehicles. I don't make any profit from the channel, but reinvest every penny that is made from it back into the videos. Hope you enjoy!
Wheel spacers are never a good idea 😬. Don't like the gas cap replacement, takes away from the sleek stock and stands out too much. Looks really rugid like it belongs on a truck.
I just went with some Eibach lowering springs on my 21. Absolutely no body roll now and looks amazing. Also you can fit 315 in the back try the r888r’s the grip is insane.
Thanks for the info!
Love the car build so far and either ZL1 wheels or 1LE are great (I bought 1LE for mine). I would never compromise safety for 3-5mm wider stance and the extra stress you are putting on the wheels and suspension, just don't use spacers! Gas cap is good, I am also thinking of doing the same (I have the Riverside Blue body colour with all black accents).
Weapon X makes Hub Centric spacers. I went their 15mm all around on my V. Changed the whole look of the car.
Thanks!
Not a fan of the gas cap, I like the stock wheels.
My stock wheels has R888R’s with the rear having 315. The steering wheel gets stiffer than normal & the grip, of course. Currently I’m running on MRR M755 black wheels with M. Pilot Sports 4S. Decided to go taller to fill gap didn’t want to modify the suspension. Front 285/35r20 & rear 305/35r20. Looks amazing. This setup am using 5mm & 3mm for the rear. I’m looking into getting 315/35 Nitto’s for the rear. Take your time
Thanks for the info!
Keep checking wheel torque......
Very important when running spacers.
Plus , here is a helpful hint for track rats
Most tracks will not allow wheel spacers
When Passing through Tec inspection .
Just an FYI.
I'm not a fan of the cap either but as long as you like it, that's all that matters. You mentioned about having too much black on the car but u want to do black ZL1 stickers? You also mentioned about making your car yours, unique so with that said, i wouldn't go w/a stock wheel and go w/aftermarket wheels. And most important, you should lower the ZL1, the wheel well gap is throwing off the stance. I can't remember if you talked about lowering it but it's a must. Looking fwd to this build!
I don't care alot for the gas caps either, 1LE wheels all the way.
Not a fan of the gas cap, it just looks really bulky. I’d go with 1LE wheels.
I’d go aftermarket wheels. A lot of options for some seriously good looking stuff out there. And can make it look different from the other 2 stock options
Through some 2 inch spacers on my new Z71 Tahoe, no regrets 😈 stance looks like it came out of factory that way 💯
Aftermarket rims, black ZL1 badges. This is a awesome car! I wish I could afford something like this for my channel build. Keep up the great work 🤙
Keep the stock rims and just go with bigger tires, they will really fill up the whole fender! I went with stock rims in PVD Black Chrome and they look amazing! You can never have enough carbon fiber!
Never. Enough. Carbon fiber.
I like the gas cap looks the part
Your living the dream. Happy to see your videos.
I appreciate it! Aloha
I think the aftermarket wheels with the wider tires would look really sick
Don’t go with black ZL1, look for something different, if you don’t mind go all red. If you can find one go all out and get a gun metal finish and red 💯
Safety first no spacers ! Spec the car with the proper wheel.
Probably need coil overs to really snug the fender🤙
I like the gas cap ! Screw the haters.
Hey there - nice video like the wheel spacers. On my 2017 Z06 I went with 6mm spacers on all 4 corners and I lowered it 3/4 of an inch. Looks great in my opinion.
Right on!
I have 2018 zl1 1le and I would do something different. My whole car is black but I’ll probably do bronze wheels
Keep the ZL1 wheels. Gas cap is a no for me. I like the clean look of the stock one. I don’t like that it sticks out.
Keep in mind if you push the wheels out, you'll get more tar sling, road grime and paint chips.
Wheel spacers are not a good idea at all, they add load to the axle and extra load to the power steering. Plus way too little threads holding the front lug nuts for a performance car.
Good Job Lonestar 👏 👍 looks good. I'm looking forward to seeing that new grill!!!
I agree the gas cap look out of place
Not feeling the fuel door, but defiantly stick with the stock Zl1 wheels.
Dude. This is awesome. Reminds me of the exorcist camero a little bit….
I vote for getting the stock 1LE wheels
I got 2021 just like the one on my profile pic
And. I really like putting spacer what’s your recommendation or advice for me for the size or the kind that I need to use
Thank you
Who you foolin!? You're gonna get the 1LEs. 😉
I love your build. I can’t wait to own my own ZL1 so soon
Aftermarket wheels or 1le
You should’ve removed the 2 bolts behind your brake pad,the 34mm and then you can pull the front strut outwards a little to help. The bolt has like 5 mm of play
The top one is the one that moves and you need to put the nuts on the end and hammer the top bolt partly out
Love the car but from us truck guys don't forget about the OG
I would not go with wheel spacers. Bad things don’t happen often when spacers are used, but when they do it’s bad news.
The ones u have look great
I’m sure they make a carbon fiber ZL1 badge. Just an idea
Yes change out the zL1 bag
How did the wheel spacers with stock studs hold up? Thinking about buying the same set up.
Held up just fine for the few months I ran them. 🤙🏽
I currently have stock 20" 305 tires on my 2017 ZL1. Would 315's or even 325" tires fit on the stock wheels with no clearance issues?
Aftermarket rims 👌🏽
where's the light-up rims in the thumbnail or was that just click-bait ?
Too much Tron vibes lol
Have you thought about air conditioning the garage. Mini split???
Yes and Yes... I NEED it... That or at least one of the those rolling units for now.
what he needs is another garage built... but his HOA will prob say no way. That is why HOA's suck.
I like the gas cap. Where can I buy one? Please send me a link! 👌
Link's always in description. Check it out. I'm loving mine.
Random question; I haven't seen the previous few videos of it was already answered, but did the Quick Jack kinda fail due to user error or manufacturer defect? Pretty important to report to Quick Jack if it was a defect :0
You can check out the previous video for the full explanation. QuckJack lift works perfect, the rubber blocks they provide begin to deform/flex when you have a vehicle up on them for a few hours.
You really keep an eye on that MPG gauge :D lol.
Foose wheels!
If only I could afford a set of those... that dude is my hero.
The 🚗 is dope.
Aftermarket!
Can we get a video of spacers on the trail boss?
Remove the gas cap and throw on 1le wheels
I usually like your taste in mods but I have to say it....that gas cap doesn't fit in my opinion. It looks like it's straight from AutoZone and reminds me of an overdone V6. The car is turning out nice though
Lol! This seems like a common theme in the comments... not a lot of love for my eBay gas cap 🤔
Don't put spacers on that car. Get some HRE Flow Form wheels and don't take the shortcut route of wheel spacers.
So are you just done with the OG?
I hear very bad things about using wheel spacers. If anyone out there has experience using them please inform me.
Dude! What do you do for a living to afford all those vehicles and mods! Just jealous. 😆
And that jack...wow.
The wheels...? I don't think spacers made a whole lot of difference.
Also. I'm confused. Are you in Hawaii or Texas?
Moved to Texas about 2 years ago. Started the channel back home in HI, so older videos are based there. The UA-cam channel (your views and support) actually funds everything I do on the vehicles. I don't make any profit from the channel, but reinvest every penny that is made from it back into the videos. Hope you enjoy!
@@LonestarHawaiian I do enjoy. Pretty cool things you do in those vids.
Do you read your viewers comments, and get back to them?
As much as I can.
No spacers please!🤙
So is this guy from Hawaii but lives in texas? New subscriber that’s why I ask.
Hawaiian, born and raised in TX but lived in HI for the last 10 years and recently moved back to TX. Clear a mud, right?
Get some Z28 style wheels
Good thought!
Just black out the Z or the 1
Go aftermarket!
Thanks!
Not a fan of the gas cap, Make your car really stand out with aftermarket wheels and lower it just a bit.
Wheel spacers are never a good idea 😬. Don't like the gas cap replacement, takes away from the sleek stock and stands out too much. Looks really rugid like it belongs on a truck.
I would remove all chrome and replace with black.
needs to be lowerd
Stock wheels!
and yes, black ZL1 badges
1LE wheels look better
Cap is tacky.