I got no help from the seller. I almost retuned it as defective until I came across this video. I bought this exact kit and with my household maintenance and installing experience, I was baffled by the instructions booklet. Thanks for this.
Old thread, many questions. I have got this alarm and want to emphasize two things: 1 - As far as I understand, this alarm uses 2G and needs an old type of SIM-card, which may not be available any more. In Sweden, none of the mobile providers have these old cards anymore, hence making the GSM part of the alarm useless. 2 - There is no function for a PIN-coded reset when an alarm is triggered. Which means that anyone can just reset (and quiet) the alarm just by pressing the "unarm" button. The solution is to mount the main unit for example in a locked area. And use the provided remote control for resetting. (Which means the main unit can't be too hidden anyway.) Two important shortcomings, which made the alarm much less usable.
Thank you! Do you get any false alarms with these motion sensors? In an effort to avoid false alarms, I am planning on buying this same system but with different motion sensors with Dual PIR + Microwave MW, from a different manufacturer, will any/most sensors work with this system. If you an affiliated link I’ll buy from it.
Hi i have a 4 wire fire detector To connect with this alarm, should i do the settings of the fire detector on nc or no? I got it to work but after I installed the wired pir sensor the fire stopped reacting and when pir is triggered the is no soumd coming out of the siren it just send mag and call. Thanks
Hello , first of all thank you for the top video!The installation of the sim card does not work for me. Must the card on the post (Germany)be activated?
Hello, in the description of the video you mention programming the alarm. So how do you program the alarm? The alarm is sold in several languages, so distributors have to program it for the local language. I have been able to successfully modify the audio messages, but not the SMS yet. In addition, the main CPU sends SMS to the GSM modem in PDU mode. Can you advise how to modify SMS messages? Thank's.
Hi, thank's great video. I have 2 problems: 1) My battery is out of order and it is impossible to find a spare on the market and 2) 2) Controlling the alarm (SIRENON, ALARMON, etc.) via the smartphone does not work. The alarm beeps but does not send back a confirmation sms. Do you have an opinion?
Hi I have lost my gsm manual since I got them 3 years ago..I have kept it since as I do not have the manual to set it up ..I have tried to follow yours to set them but it seems have a different codes and programs..what can I do to obtain a manual or some kind of help to set it up..thanks
Hi great video- how do you get the wireless door sensor to trigger and count down for 15s with out all the pir’s also counting down for 15s can seem to get pir’s to alarm instantly and door wireless sensor to allow 15s entry time cheers
Do you need to insert the sim card pin? I have the sim card from the portuguese operator MEO, and the indication of the activated network does not appear
So, by default, the burglar has 40 seconds to locate the host by its sound and press the disarm button. I he manages to do that, the owner won't be notified about the intrusion.
Hello, Can you tell me how to programmed one wireless door sensor to sound when the door opens please ? Whilst the alarm is not activated ? just as a door opening warning ? please
Having a little difficulty programming the GSM alarm for delayed entry. I have a wireless detector coded as zone No. 3, but the commands to make it delay are not working. Do you know what I might be doing wrong?
Hi, I have purchased the alarm in this video. I would need to connect 2 sirens of 75 ohm. I wanted to ask you where I need to connect. I tried in the last two as explained in the video but it does not work. What do I need to add in order to make them sound? Could you please help me?
i just bought one and i need help because one of the sensor is not working. when i lock it and i walk in room it just goes beep beep beep and nothing happends. The other 2 the alarm goes off but thats only because i set it at 23 then a random number 09 and pressed hash key so it must be set up with right zone. But i cant set this last one to that zone because I cant delete it cos i dont no what number it is set at. What can i do help me ?
I am having real problems wiring in a pir to zone 1, i have easily set the zone ative in the menu but will not trigger alarm, pir can be seen lighting up when motion but no alarm trigger. Have tamper on pir to zone 1 & cc to com on panel (have also tried to ground) can you help?
This unit accept 10 sec voice recording. Do you know under which condition this voice recording is heard after host sounds alarm? When the unit call the preset numbers does not announce the voice recording message.
Great video. Iv just bought this system... BUT.. Where did you fit main unit cause its not properly secured to wall so intruder can easily clip it of wall..
hi i have a opexia op-g99 alarm system but i misplaced the manual and now i am unable to set the system ..do you have a tutorial that is able to assist me setting this alarm thanks
Hi, is there any way of shortening the alarm on this? I'm using it as a driveway monitor, but I dont want the siren to go off for 3 minutes each team. Can I set it to ring for only 10 seconds? Alternatively is there anyway of pairing a wireless doorbell to this as the siren?
Would you be able to make an instruction video on how to connect a PIR motion detector with the main host? If this isn't possible then could you message me some instructions. Thanks.
hi you can add my whatspp +8617612778257 or check the link then will help you www.aliexpress.com/store/product/Home-Security-Alarm-systems-Metal-Remote-Control-Voice-Prompt-Wireless-Door-sensor-LCD-Display-Wired-Siren/910381_32952613601.html?albbt=1&isdl=y&aff_short_key=uNb6i2f&aff_platform=true&albslr=201206798&src=UA-cam
Rye Cooder Rye Cooder I tried setting the siren but siren won't switch off armed or unarmed. I'm feeding the black wire into ground connection and red wire into 9v Things to note I don't have a SIM card in Could that be the reason or I'm connecting it wrong?
Thanks...question... ..my unit came without batteries and I need to determine what size battery to use in the remotes. Do you know what battery works in the remote?
Nice video... But,Mine must be a slightly different version to the one in the video,Got all the sensors working but the magnetic contacts (That are already wired up ) wont work,Tried a factory reset but still no good. It's like they are disabled,Any ideas
I have exactly the same model. When is armed and i trigger an sesnor, the alarm is starting and send sms and call but no siren alarm not even on wired siren. Can you help me please? Thank you.
Does anyone know how to get a SIM card for this system? I ordered it from Walmart and am needing one ASAP as I am moving and I need it for my new place
Hi igsI got a new sim card and tryed it in my mobile first to make sure it works and it does with sms/calls the machine was powered off before I put sim in tryed to call the machine but nothing is happening there isn't any pin code on simthanks dave
Hi.when you put new sim in the phone did that sim had a access code or phone start up straight away and you where able to use it ? if there was a access code then you have to set up in the phone security to take that code off Also to reset the system to factory settings you should find in the manual long digit code ,just read manual better .i am away for the week so can't send the code I have any it could be different.
Please have a look at the new inprover system here on youtube, it will actually indicate to outsiders whether someones in the property when the alarm is sounding !
Hi igs20101, I have been using the same (basically) system for a good while now but there is one function setting I just don't understand the use of it. In my book its #20-Host Timing Function Setting, 2 options, 0-close all timing arm/disarm function, or 1-open all timing arm/disarm function. Maybe its the way its worded but I don't understand what it does lol! In setup state its 41 for mine, I have never set it either way, everything functions as it should but it bugs me that it has me clueless. You seem to know a good bit, any ideas, anyone? I just want to know its function, thanks.
Hi, The Host Timing Setting allows the alarm to arm and disarm itself at a certain times each day. In setup 42hhmmhhmm# sets the two times (disarm, then arm time). 411# then enables the timed function. 410# disables it. Hope this helps.
I see, so yours like mine has separate inputs. Setting arm/disarm times is the step below the input that switches those times on or off. Mine must default to on, I have never changed it but my timers work once set, that would also explain why I never changed it but my timers work. Thanks a lot, I appreciate it.
Hi.in my panel ,and as far as I came a cross few of them I found that all wired zones on the back are already numbered.and depending on your alarm full spec wired zones start like from 93 for zone 1,then 94 as zone 2 and so on fallowing from your manual of the wired zones .so after you installed 22 wireless zones and adding one wired ,than that zone will be zone93 and you have to program that zone 93 for whatever function that zone will be.like front door or back door and I have to program it as access zone 93..hope that was helpful.
instruction command is 47 so therefore it should be 6666# 47 xx # - xx being your sensor number, depending on system that will be 01 to 07 or 08 Hopefully this will work, it does on mine. This of course depends on your system.
hi i'm trying to figure out how to set up the time but ive tried everything all the numbers for Ect. 33.34.35 and nothing so please get back to me on this
Good day Is there anyone who will be able to assist in how to connect an LED to the system so we will be able to see from the outside when it is armed.
Hi my system looks just like yours but my default password is 6666. There is no instruction on how to enable delay on the wired door contact. are you able to help? My Z1 wired is 81 on system. Thank you.
Hi .had a quick look at ur question and their is few different problems that u can end up with and also it quiet a lot to be meant to be adjusted . if the factory codes are already different ,then it possible programming code also will be different .in my case 99 wireless and after 7 wired .also to program first wired zone as entry zone I would have to use operation methods with my settings that I will explain here ,but possibly not the same as yours . it starts from 60(defence zone programming that I want to do ) My case Zone 100 - is first wired zone that will have to be as door opener and then it will have to be marked from the manual as all options to be done like zone type,what alarm type and in my case if siren on or of if it set for 24 type alarm.so looking will be 60>30(entry time)>4(door alarm)>0(siren on) .witch means my hard wired zone 1 is set for 30 sec to entry/exit as a door alarm and siren not used in that 30 seconds when that zone is touched ..
It's lots to explain on this type along and was thinking to make photo for reply but seemly I can't post any photos anywhere.if u want to send me ur email I will post current manual later on and see if u can do anything
instruction command is 47 so therefore it should be 6666# 47 xx # - xx being your sensor number, depending on system that will be 01 to 07 or 08 Hopefully this will work, it does on mine.
how to setup panic button using this keypad, the problem is punic buttom must keep active, but in this model panic button only work when arm, pls someone help
this Parnell have option to turn voice of inside when u do any work or if you want some commands been voiced .Oslo that inside ringing option useful to set up to go of if someone broken in to the house .you just have to play with voice settings and see what would u keep it
Hi I had to put a new sim in as my last one deactivated. The new one is showing no signal and I have lost my master password and manual. Any idea how to fix it?
Really need some help can't get the alarm to ring or text me. I have topped up the sim I can call and send texts so that's all fine I've programmed my number in the host still nothing please help
first change the user password in setup mode and if you want 3333 for password type 383333# than to lock the keypad in setup mode type 401# it should say setup completed and that's it.
u get ur SIM in any shop that sales the phone ,only make sure its still old type big size sim not for not for iPhone .and also that SIM have to be security code unblocked or u can change that settings with normal phone be for using in alarm
+lam le depends where u live and the rules of the SIM card provider.i am live in Ireland and one of the network,that I use for this alarm have a full to top up SIM card every 6 month by min 10 Euro.even if u don't use that credit u can make few phone calls to any number or different country from alarm panel itself to chat ur best friend abroad
Granges d'en Haut, my understanding is that it might be the version of your sim card. If you have a sim newer than the 128k sim, that might be the problem. Try with a 128k sim.
Am I being stupid but what’s stopping a robber breaking into my house and just hitting the unarmed button on alarm system before it goes off ? Most alarms u use have a keypad to put a password in before it goes off. Can anyone help with this. As every time I walk in I can just hit the unarmed button and it goes off 😩
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I got no help from the seller. I almost retuned it as defective until I came across this video. I bought this exact kit and with my household maintenance and installing experience, I was baffled by the instructions booklet. Thanks for this.
Old thread, many questions. I have got this alarm and want to emphasize two things:
1 - As far as I understand, this alarm uses 2G and needs an old type of SIM-card, which may not be available any more. In Sweden, none of the mobile providers have these old cards anymore, hence making the GSM part of the alarm useless.
2 - There is no function for a PIN-coded reset when an alarm is triggered. Which means that anyone can just reset (and quiet) the alarm just by pressing the "unarm" button. The solution is to mount the main unit for example in a locked area. And use the provided remote control for resetting. (Which means the main unit can't be too hidden anyway.)
Two important shortcomings, which made the alarm much less usable.
Can you use this system without the Sim card
Thank you! So helpful.
If you are ever in Yorkshire I'll buy you a beer.
I have a question. When arming/disarming the siren beeps. Is there a way to stop it beeping when arming and disarming?
Yea Same question please help
Hi, can you have a code to disarm all the sensors and another to disarm some of them?
Thank you! Do you get any false alarms with these motion sensors? In an effort to avoid false alarms, I am planning on buying this same system but with different motion sensors with Dual PIR + Microwave MW, from a different manufacturer, will any/most sensors work with this system. If you an affiliated link I’ll buy from it.
Hi, Is alarm volume adjustable? I would prefer to keep volume low when I am around and high when not.
Thanks for your Video!. I found it very useful. I successfully installed my unit following your installation tips👍👍
Hi i have a 4 wire fire detector
To connect with this alarm, should i do the settings of the fire detector on nc or no? I got it to work but after I installed the wired pir sensor the fire stopped reacting and when pir is triggered the is no soumd coming out of the siren it just send mag and call.
Thanks
Hi, your wired magnetic sensor is NC or NO? Thanks
Hello , first of all thank you for the top video!The installation of the sim card does not work for me. Must the card on the post (Germany)be activated?
Regarding the sim card. Do you have data with the gsm sim card? Or do you only have talk and text for the sim card plan?
Hello, in the description of the video you mention programming the alarm. So how do you program the alarm? The alarm is sold in several languages, so distributors have to program it for the local language. I have been able to successfully modify the audio messages, but not the SMS yet. In addition, the main CPU sends SMS to the GSM modem in PDU mode. Can you advise how to modify SMS messages? Thank's.
great video do you know where I can get the manual?
Hi, thank's great video. I have 2 problems: 1) My battery is out of order and it is impossible to find a spare on the market and 2) 2) Controlling the alarm (SIRENON, ALARMON, etc.) via the smartphone does not work. The alarm beeps but does not send back a confirmation sms. Do you have an opinion?
Hi I have lost my gsm manual since I got them 3 years ago..I have kept it since as I do not have the manual to set it up ..I have tried to follow yours to set them but it seems have a different codes and programs..what can I do to obtain a manual or some kind of help to set it up..thanks
Hi I'm looking at one these alarm systems for my shed. How has the alarm stood the test of time ? Would you recommend it ? Thanks
Hi great video- how do you get the wireless door sensor to trigger and count down for 15s with out all the pir’s also counting down for 15s can seem to get pir’s to alarm instantly and door wireless sensor to allow 15s entry time cheers
I don't see a setting for that I think you can only have one time setting
When calling the system, whether it is possible to change the number of rings, or insert a delay until the system answers?
Hi, do you know how to connect the wired panic attack to this system as you know there's tamper connector on the panel? Thanks
Thank you! The manual on mine is almost impossible to understand, but it's pretty straight forward once you watch this video.
can I connect a simple contact NO to wired zone or i need some resistor, thanks
Do you need to insert the sim card pin? I have the sim card from the portuguese operator MEO, and the indication of the activated network does not appear
Is it possible to use gsm when arming or disarming the unit remotely
So, by default, the burglar has 40 seconds to locate the host by its sound and press the disarm button. I he manages to do that, the owner won't be notified about the intrusion.
The power supply is provided for the 12v standard, but what is the admissible voltage range? Can we go up to 14v?
Hello, Can you tell me how to programmed one wireless door sensor to sound when the door opens please ? Whilst the alarm is not activated ? just as a door opening warning ? please
Having a little difficulty programming the GSM alarm for delayed entry. I have a wireless detector coded as zone No. 3, but the commands to make it delay are not working. Do you know what I might be doing wrong?
Hi, I have purchased the alarm in this video. I would need to connect 2 sirens of 75 ohm. I wanted to ask you where I need to connect. I tried in the last two as explained in the video but it does not work. What do I need to add in order to make them sound? Could you please help me?
Hi I was wondering how does the phone and line works on pstn alarm systems.
Hi is there a entry and exit zone or do all the zones have a time delay
i just bought one and i need help because one of the sensor is not working. when i lock it and i walk in room it just goes beep beep beep and nothing happends. The other 2 the alarm goes off but thats only because i set it at 23 then a random number 09 and pressed hash key so it must be set up with right zone. But i cant set this last one to that zone because I cant delete it cos i dont no what number it is set at. What can i do help me ?
Hi! Can I use this system without to insert a sim card? Thank you
Yes you can, but you will not be alerted on your mobile phone, nor you 'll be able to operate the security host via your mobile phone.
kyriakos thank you
kyriakos do you need data or can you just get sms for the sim card?
should the Signal Led Be flashing if you have a Simcard Installed ???
I am having real problems wiring in a pir to zone 1, i have easily set the zone ative in the menu but will not trigger alarm, pir can be seen lighting up when motion but no alarm trigger. Have tamper on pir to zone 1 & cc to com on panel (have also tried to ground) can you help?
This unit accept 10 sec voice recording. Do you know under which condition this voice recording is heard after host sounds alarm? When the unit call the preset numbers does not announce the voice recording message.
Thanks so much for the quick response to my question. I appreciate it very much. Great, helpful video!
What number is the factory setting its not showing up in Manuel. Dave
Is it possible to do a walk test to check that everything is working without setting off the alarm siren each time it is triggered?
Hello there, how do you get the sim card?, do you have to sign up with a phone company? And do you have to a monthly fee to some company?
Great video.
Iv just bought this system... BUT.. Where did you fit main unit cause its not properly secured to wall so intruder can easily clip it of wall..
hi i have a opexia op-g99 alarm system but i misplaced the manual and now i am unable to set the system ..do you have a tutorial that is able to assist me setting this alarm
thanks
Hi, is there any way of shortening the alarm on this? I'm using it as a driveway monitor, but I dont want the siren to go off for 3 minutes each team. Can I set it to ring for only 10 seconds?
Alternatively is there anyway of pairing a wireless doorbell to this as the siren?
Hi, I have te same question... Did you resolve? How? Thanks
Could you help me I recently bought an indoor siren when I connect it won’t stop going off could you tell how fix this please
Thank you for this. I find the manual both carefully written, yet confusing!
Can't figure out how to make entry door a 20 second delay and leave all the other sensors at 1 second. Any help would be appreciated.
How do I stop the bleep when pressing buttons and turn her down a little
Would you be able to make an instruction video on how to connect a PIR motion detector with the main host? If this isn't possible then could you message me some instructions. Thanks.
Hi I was wondering of how the phone and line on the alarm system z.
Hello, which phone system should I use for remote communication?
hi you can add my whatspp +8617612778257 or check the link then will help you
www.aliexpress.com/store/product/Home-Security-Alarm-systems-Metal-Remote-Control-Voice-Prompt-Wireless-Door-sensor-LCD-Display-Wired-Siren/910381_32952613601.html?albbt=1&isdl=y&aff_short_key=uNb6i2f&aff_platform=true&albslr=201206798&src=UA-cam
great video, thanks, however, how do i adjust the siren on time? mine takes a while, like 4 mins, wanted to make it 2 or 3mins of noise
Chris in setup mode press 32 on the keypad then enter the time [00-15] minutes finally press # the host then makes a long beep your gone
@@ryecoodr woooooow, thank you very very much, woooow, thanks, am so relieved
Rye Cooder Rye Cooder I tried setting the siren but siren won't switch off armed or unarmed.
I'm feeding the black wire into ground connection and red wire into 9v
Things to note I don't have a SIM card in
Could that be the reason or I'm connecting it wrong?
@@NoName-vi7lg to hook up your external siren you connect the wires to BZ- and BZ+
hi Could you tell me where can I find manual for it?
Daniel Brańka drive.google.com/file/d/1y8zGgrWocGnHARorjBgC5slkqhKtPxva/view?usp=drivesdk
www.aliexpress.com/store/product/Free-shipping-Wireless-SMS-Home-GSM-Alarm-system-House-intelligent-Burglar-Security-LCD-Keyboard-Wireless-GSM/711262_32464441757.html?spm=2114.12010612.8148356.1.f2412c189F2NFa
what phone app it has to be used for this system. Tks
do they charge a monthly fee to use this system and what is the sim card for
@@richardlentner8619 no monthly fee. you just put your own sim card in. you can use pay as you go if you want
Hi! It is possible to disable the voice prompts in this alarm? I would like to use it without it. Thanks!
hi.there is some settings in manual for internal bell / notifications not to sound or answer ,but don't have manual with me yet to check properly .
PLease do you know the settings for it?
This is very useful, please can you help with how I can add wired strobe light to the system
Thanks...question...
..my unit came without batteries and I need to determine what size battery to use in the remotes. Do you know what battery works in the remote?
Larry Minichello it works with 23a a23 v12 alkaline batteries
I’m pretty sure I threw my last one out a couple days ago so the package is gone
hi, just 1 question ,,for the GSM sim card ,,it need the pin code or not ?
if yes how to put it in ?, thank's
1 2 3 4 is a PIN code when you dial the SIMS card number
I cannot arm nor disarm host. Please help me to do this. I followed the instructions in the manual.
Nice video... But,Mine must be a slightly different version to the one in the video,Got all the sensors working but the magnetic contacts (That are already wired up ) wont work,Tried a factory reset but still no good. It's like they are disabled,Any ideas
Same mine did you figured out?
I have exactly the same model. When is armed and i trigger an sesnor, the alarm is starting and send sms and call but no siren alarm not even on wired siren. Can you help me please? Thank you.
try this in setup state press 32 on the keypad than [00-15] minutes finally press # the host makes a long beep your done
Does anyone know how to get a SIM card for this system? I ordered it from Walmart and am needing one ASAP as I am moving and I need it for my new place
Hello only mij power lamp is working is there a hard reset
Very usefull thank you brother ..I cleared my doubts
Hi do you know if 99 + 8 zone model have GPRS function?
is there a monthly charge to use this system or is it free
Hi. I have this alarm and think can I switch off sound twice siren beep when I unlock alarm? And can I add extra siren?
Bu Tom Hello, have you found a solution? Mfg.
I want to know if you need a Sim card to use this system. I trying to find out if I can use it without a Sim card
Buy the WiFi model, no need of sim card. But if the internet is down, GSM is a better choices ce
May I know the model and code of it because before I buy, I need to check more details?
Thank you sir. Just how to set data and time?
Hi igsI got a new sim card and tryed it in my mobile first to make sure it works and it does with sms/calls the machine was powered off before I put sim in tryed to call the machine but nothing is happening there isn't any pin code on simthanks dave
Hi.when you put new sim in the phone did that sim had a access code or phone start up straight away and you where able to use it ? if there was a access code then you have to set up in the phone security to take that code off Also to reset the system to factory settings you should find in the manual long digit code ,just read manual better .i am away for the week so can't send the code I have any it could be different.
Remember that this is a GSM system so it will not take a 3G-only SIM such as those for the THREE network in the UK
Please have a look at the new inprover system here on youtube, it will actually indicate to outsiders whether someones in the property when the alarm is sounding !
Hi igs20101, I have been using the same (basically) system for a good while now but there is one function setting I just don't understand the use of it. In my book its #20-Host Timing Function Setting, 2 options, 0-close all timing arm/disarm function, or 1-open all timing arm/disarm function. Maybe its the way its worded but I don't understand what it does lol! In setup state its 41 for mine, I have never set it either way, everything functions as it should but it bugs me that it has me clueless. You seem to know a good bit, any ideas, anyone? I just want to know its function, thanks.
Hi, The Host Timing Setting allows the alarm to arm and disarm itself at a certain times each day. In setup 42hhmmhhmm# sets the two times (disarm, then arm time). 411# then enables the timed function. 410# disables it. Hope this helps.
I see, so yours like mine has separate inputs. Setting arm/disarm times is the step below the input that switches those times on or off. Mine must default to on, I have never changed it but my timers work once set, that would also explain why I never changed it but my timers work. Thanks a lot, I appreciate it.
How do you set the time ?
Hi...how setting wired zone, the code 23 for wireless sensor, what code for wired sensor ? Thanks
Hi.in my panel ,and as far as I came a cross few of them I found that all wired zones on the back are already numbered.and depending on your alarm full spec wired zones start like from 93 for zone 1,then 94 as zone 2 and so on fallowing from your manual of the wired zones .so after you installed 22 wireless zones and adding one wired ,than that zone will be zone93 and you have to program that zone 93 for whatever function that zone will be.like front door or back door and I have to program it as access zone 93..hope that was helpful.
instruction command is 47 so therefore it should be 6666# 47 xx # - xx being your sensor number, depending on system that will be 01 to 07 or 08
Hopefully this will work, it does on mine. This of course depends on your system.
can you add more than one siren so it can be louder?
Can't
What is the name of the App you are using for mobile - ANDROID ?
Can anyone help I changed to factory settings and it’s not picking up the outside siren. How do I do this? Please
how do you change the passcode on the alarm?
hi i'm trying to figure out how to set up the time but ive tried everything all the numbers for Ect. 33.34.35 and nothing
so please get back to me on this
help :) I have this but its in arm mode and i don't know know to manually take it out of this state to enable me to set it up correctly.
Is this security system free or is there a monthly charge what is the sim card for and do you have to buy it thank you for your help
any log management ?
Good day
Is there anyone who will be able to assist in how to connect an LED to the system so we will be able to see from the outside when it is armed.
Hi my system looks just like yours but my default password is 6666. There is no instruction on how to enable delay on the wired door contact. are you able to help? My Z1 wired is 81 on system. Thank you.
Hi .had a quick look at ur question and their is few different problems that u can end up with and also it quiet a lot to be meant to be adjusted .
if the factory codes are already different ,then it possible programming code also will be different .in my case 99 wireless and after 7 wired .also to program first wired zone as entry zone I would have to use operation methods with my settings that I will explain here ,but possibly not the same as yours .
it starts from 60(defence zone programming that I want to do ) My case Zone 100 - is first wired zone that will have to be as door opener and then it will have to be marked from the manual as all options to be done like zone type,what alarm type and in my case if siren on or of if it set for 24 type alarm.so looking will be 60>30(entry time)>4(door alarm)>0(siren on) .witch means my hard wired zone 1 is set for 30 sec to entry/exit as a door alarm and siren not used in that 30 seconds when that zone is touched ..
It's lots to explain on this type along and was thinking to make photo for reply but seemly I can't post any photos anywhere.if u want to send me ur email I will post current manual later on and see if u can do anything
Hi,
My system like yours is 6666# and I am also trying to hard wire a contact, have you had any luck yet.
instruction command is 47 so therefore it should be 6666# 47 xx # - xx being your sensor number, depending on system that will be 01 to 07 or 08
Hopefully this will work, it does on mine.
Hi,
Yes, I've now got it sorted, code as you say with a 10k resistance, many thanks.
how to setup panic button using this keypad, the problem is punic buttom must keep active, but in this model panic button only work when arm, pls someone help
my alarm sound is coming out of the speaker were the voice is. The external alarm just clicks any suggestions.
this Parnell have option to turn voice of inside when u do any work or if you want some commands been voiced .Oslo that inside ringing option useful to set up to go of if someone broken in to the house .you just have to play with voice settings and see what would u keep it
how can i reduce the sound of the voice??? please can you right me down what to press??
Very helpful tutorial. Thank you! ★★★★★
Hello where can I download the manual?
Hi I had to put a new sim in as my last one deactivated. The new one is showing no signal and I have lost my master password and manual. Any idea how to fix it?
Please input the factory reset no.
U can find at your instruction manual book
hi how can i get the devices here in zaria kaduna state nigeria
hi could u plz share the guild book of Wireless GSM alarm
If I want to get the system to alert me on my mobile phone...will I need to pay a monthy charge on a sim card to a phone company.
nickjaxe you will have to pay the monthly payment for have the SIM card activated, i pay 20 dollar monthly in tmobile
I have one of these i had 2 sim cards and i can not get it to contact my phone
O mesmo problema eu tenho o sinal não passa de 06 impedindo a comunicação com o alarme.
Really need some help can't get the alarm to ring or text me. I have topped up the sim I can call and send texts so that's all fine I've programmed my number in the host still nothing please help
Im having same problem help
Same problem here. Any suggestion?
Hello, my system wont ask me for the user password to turn off the alarm any idea why? And how do i fix it?
first change the user password in setup mode and if you want 3333 for password type 383333#
than to lock the keypad in setup mode type 401# it should say setup completed and that's it.
+Rye Cooder thanks alot
very helpful, thanks!
You're a genius. Thanks.
With the SIM card installed I could not get it to call out on my phone. Looking to send it back.
Do you have a monthly service charge if you use this security system.
Because you need a top up for the sim lol
Link to the book of coding?
where i can get the sim .it come with alarm system .thanks
u get ur SIM in any shop that sales the phone ,only make sure its still old type big size sim not for not for iPhone .and also that SIM have to be security code unblocked or u can change that settings with normal phone be for using in alarm
where you will get home to set alarm system
i don't know yet
that mean the sim card we have to payment look like the cell phone
+lam le depends where u live and the rules of the SIM card provider.i am live in Ireland and one of the network,that I use for this alarm have a full to top up SIM card every 6 month by min 10 Euro.even if u don't use that credit u can make few phone calls to any number or different country from alarm panel itself to chat ur best friend abroad
I made a password on this device but when I go to arm/disarm it doesn’t ask me to “please enter password “
Calum Sutherland hi mate that’s the same with me did u manage to sort it? I would love to know
Hi, the sim card is not recognized. Anything i can do?
Granges d'en Haut, my understanding is that it might be the version of your sim card. If you have a sim newer than the 128k sim, that might be the problem. Try with a 128k sim.
Am I being stupid but what’s stopping a robber breaking into my house and just hitting the unarmed button on alarm system before it goes off ? Most alarms u use have a keypad to put a password in before it goes off. Can anyone help with this. As every time I walk in I can just hit the unarmed button and it goes off 😩
the rechargeable battery of the alarm never charges, please help
Sorry to be a bother but does anyone know how to code a new fob for this system any help is very appreciated