One of the best how-to videos I've ever seen. I'm a little perturbed my wife paid $15 in advance for delivery guys to do this but after seeing this video I guess I'll just leave it be.
I didnt know I could pay the delivery guys $15 to change the door, a bargain! I'm sure it would cost me more now 2 years later and the charge of getting them out here, also!
This video was 100% in every single step needed. Saved me so much time. Also, I didn’t even know the door also opened vertically until I saw it at the end of the video
Thank you so much for your feedback! We're thrilled to hear that the video was helpful to you and saved you a significant amount of time. It's always our goal to provide clear and comprehensive instructions to our viewers. We're glad that the video was able to showcase the door's vertical opening feature, which you may not have been aware of previously. If you have any questions or need assistance, please feel free send us a private message on Facebook and Twitter (X) using the handle @LGUSSupport. We're here to help!
Omg!! THANK YOU!!! This video made it a breeze to reverse the door. The printed manual made me avoid doing this for over a year! It took tops 15 minutes to get this done. Kuddos!
Just received my 7800 set. The Home Depot delivery guys said they wouldn't reverse the door because it'd take too much time. So I kept my $40 tip. I'll attempt to do it myself, using this video. Thank you so much LG.
Excellent video! My son decided to refill a fabric softener bottle on top of the dryer... it didn't go well. Most of it went down the front, and inside the door (it was streaking down the inside of the glass). The video showed me exactly which screws needed to be removed to get inside and clean it up. He's banned from the laundry room for a week!
Great video, with one caveat: at 2:26 the caption says, "The components are now reversed." Except they aren't 🤔. The caption then changes to read, "Pause the video to double check your setup if necessary." Except if you use the video frame here to check your work, you will get it wrong 😱because the video frame shows the hardware as it comes from the factory with the hinges on the right and latch on the left. Maybe this explains why our delivery guy had such a hard time. He assured us he could reverse the door, then spent 2 1/2 hours in the laundry room alternately looking at the video on his phone and running his impact driver(😧). When he finished most of the screws holding the door cover in place were stripped, as were three of the four hinge screws. The fourth was missing entirely. The dealer ordered us a new door, which I reversed myself and it wasn't too difficult to do a proper job of it thanks to this video. I had to buy new hinge screws, but that wasn't difficult as they are standard metric sizes that are readily available at our local hardware store.
This was an outstanding video. The instructions that came with the dryer were not helpful at all. This video clearly walked me through each step. It took a bit of time but I did it, and there were no extra parts left over. Thank you!
Thank you for this video! It’s very detailed, it took me about an hour but because my kids kept coming in to ask me questions. Thanks for showing us how to do it.
Hi, there! Glad to hear that our video helped you make your wife very happy. If there is anything we can serve you further, just let us know by sending us a private message through @LGUSSUpport on Facebook or X. ^Danee
Really well done video, clear and easy to follow. My one thought is that it should be made clear that regarding the four door hinge screws... The two LONG screws go on the TOP hinge and the two SHORT screws go on the bottom hinge. Thanks for posting these videos.
I noticed the different screws as well. I just made a mental note of that when I took them out. Other than that, this video was exceptionally clear and precise!
It took me about an hour as well. I had one problem with the video. At around 2:28-2:30 when it was time to double check my setup, the video had the bottom latches already swapped, but not the top and middle ones. In fact, the video had already shown these parts being swapped earlier, so that was confusing. Other than that, I was able to reverse my door.
Hi there. Thank you for sharing your positive feedback! Our goal is to provide high-quality products and exceptional customer service, and we're glad to hear that your LG product is still performing well. If you have any further questions or need assistance with anything else, please feel free to reach out to us via private message at @LGUSSupport. We're here to help. ^Win
Hello, there. We're glad to hear that you found the video showing hinge replacement helpful. If you require further assistance or parts for the replacement, please feel free to reach out to us at @LGUSSupport so we can further assist you. ^Win
Awesome video..perfect guidance and solution! I read the manual twice, but the drawings were not very helpful. This video solved everything. Thank you!
I agree this was an excellent video. With that said, it took me about three hours. First problem I encountered was the hinge screws were so tight it took a lot of effort and a good screw driver to loosen them. I completed the directions and put the door back on. The next problem was the top latch was not catching so I could only open the top hamper door. When you pulled on the side, it opened from the top. I had to remove all the inside door screws with door attached to dryer to jiggle the inside locks to finally get it to open on the side. I took inside cover off again, played with the side lock rod and top lock rod. I put the door back on the machine. At first I had the same problem, but after loosing some screws and more jiggling, it seems to have fixed itself.
Thank you for the step by step video! Worked great for me and I finally have my for serving open the way I want. Only mishap I had was the clips on one of the plastic covers broke off while I was removing it so it won't go back on. It's a non essential part so I'm not too worried about. Thank again!
Hello, there. Thank you for your feedback! We're thrilled to hear that the video tutorial on reversing the door of the LG EasyLoad™ Dryer was helpful to you. Our video tutorials are designed to provide easy-to-follow guides and useful tips on how to use your LG devices and appliances. If you have any more questions or need further assistance, please don't hesitate to reach out at @LGUSSupport. We're here to help! ^Win
Thanks for this video. After four years I got tired of my dryer opening towards my washer. When it was put in they told me it was better that way so it wouldn't open to the wall.
Hey there. We try to make swapping the doors on your LG dryer as easy as possible. We would like to know if we can help with this more. Please private message us on social media @LGUSSupport. We'll be waiting for your message. ^David
Hey! We are happy you flipped the door, and it's drying your clothes. For other questions, private message us on social media @LGUSSupport. We are always here to help you in any possible way. ^David
Good video, one issue though when the door is apart three small plugs are resting on the rods, and they become dislodged but not all are identical. You should review the placement of each prior to the final part of putting the door cover back on :/
I appreciated the instructions, but you stopped at the door alignment. My side opening needs to be tweaked slightly, and I don't have that information.
Perfect video! The only problem I had was the first two screws that had to be swapped (sides) went into holes that were never used before and screws wouldn’t go in. So they wouldn’t strip I got a screw slightly larger and screwed it in a couple times at an angle and then the provided screws went in tight.
What size screw did you get to replace them?? This is the problem I’m running into. The left side hinge screw holes are not the same size as the right side hinge screw holes
HELP- I accidentally unscrewed 2 of the 8 screws that weren’t supposed to be unscrewed and my thread panel fell down inside my dryer! Is there anyway to get that out?
Thank you so very much for this video, it really helped. Just two minor issues, since my drier does not 100% matxh the drierin the video, I had to figure out the two inner components which where different, as to how to reverse and fit for my drier.
I’m so sad! I followed the directions just like they said. Got the door put back on and now it won’t open to the side. It will only open from the top. And, I can’t redo it because the only way to get the screws off is for the door to open from the side. Can anyone out there offer some advice for me? 🙏🏼🙏🏼🙏🏼
@lgusa - I only used my dryer less than 20 times before I swapped the door. On the bottom right hinge attached to the washer, which was moved to the bottom left side, the screw holding the door to that hinge was rusted and snapped in half inside the hinge. Where can I purchase a new hinge/screws?
It took Home Depot installers 2Hrs. I went down there to check on them to find scratches on the top of the dryer and all over the around the screws. I told them get the F out of here. I told them WHY?😢 I showed them in the beginning here are some shop towels. He rested the door on the top of the dryer to change the door. I’ll change the door my self when the new dryer comes again.
Before I found this video, I attempted to do this by following the instruction manual, which is vague at best. I now have all the parts on the machine reversed, however is there a diagram that shows what screws go where exactly on the door? I have evidently mixed some screws up. Some appear smaller, shorter, or pointy, and I’m not certain where exactly they go. I know I should’ve paid closer attention when taking it apart! Any help would be greatly appreciated.
When you pause to the show that the components are all reverse you really throw me for a loop because you're showing the first screen before you actually reverse them... Am I wrong?
Quick question , hinge bracket is no longer making contact to machine. And quick fixes? Only makes contact if I use pressure when using open hamper wise.
I'm looking for a replacement for the nylon slide lock rod, and the parts lists I've found doesn't have a part number for it. My original one broke off at the bottom so I can no longer do the open from the top trick without the whole door flapping on the remaining bottom hinge. Who knows where I can find one?
@@Mack34783 No luck! Have to buy the entire door assembly. We just open the door from the side now and pretend it never opened the other way. Have considered taking the door apart to remove the top latch mechanism so nobody can accidentally unlatch the top hinge.
This plastic opening rod stuff is very important. They should have zoomed in more or pointed out exactly where all the pieces have to be. It’s a complex hinge opening with plastic parts. 5:30
Hi, there. We are sorry for the experience, you may access this link to check if your LG Dryer Door reversal is properly aligned: www.lg.com/us/support/help-library/lg-dryer-how-to-reverse-the-dryer-door--20153089432126. You may reach out to us if you need further assistance. ^Mau
Hey there! Before we check the door light, let's make sure a few things are working properly. 1. Check the power connection: Ensure that the power cord connections at the back of the dryer and at the electrical outlet are secure. 2. Check the circuit breaker: Turn off the circuit breaker for the dryer, wait for five seconds, and then turn it back on. Note that gas units usually have a single circuit breaker, while electric units use two. 3. Check the drum light: Open the dryer and see if the drum light inside is on. If the light is off, it may indicate a power issue. 4. Perform a hard reset: Unplug the dryer and make sure any power outlets controlled by light switches are turned on. While the dryer is unplugged, press and hold the power button for five seconds, then hold down the start/pause button for another five seconds. Plug the dryer back in and check if the light and the dryer come back on. If you have questions after running through these steps, please send us a private message on social media @LGUSSupport. We're always here to help out! ~ Jupe
1:45 that screw on our model, same as the one in the video, was screwed in so tight it was not removable. Even using power tools it was not removable. Unbelievable why any assembly would tighten a screw that goddamn tight that is part of a set of pieces labeled as reversible. Had to put everything back the way it was so no, the door was not reversible. Very dissatisfied.
Hey there. We wish you could've had a better experience with your LG dryer. Sometimes, using a manual screwdriver can provide better control and leverage compared to power tools. To loosen a tight screw, first use a manual screwdriver, turning it counterclockwise with steady pressure. If that doesn't work, apply a small amount of lubricant like WD-40, wait a few minutes for it to penetrate, and then try loosening the screw again with the screwdriver. We want to learn more about your experience to see if there's any way we can assist you at this time. Please send us a private message on social media @LGUSSupport with your contact information. We'll be here to help you through this. ^ Diego
Hi, there. We're thrilled to hear that the video above was able to provide the assistance you needed regarding door reversal for LG dryers. We understand that visual guides can often be more effective than owner manuals, and we're pleased that it made the process easier for you. If you have any more questions or need further assistance, feel free to contact us. We're here to help! `Alice
![[Dryer] Installation - Door reversal instructions](/img/n.gif)
One of the best how-to videos I've ever seen. I'm a little perturbed my wife paid $15 in advance for delivery guys to do this but after seeing this video I guess I'll just leave it be.
I didnt know I could pay the delivery guys $15 to change the door, a bargain! I'm sure it would cost me more now 2 years later and the charge of getting them out here, also!
This video was 100% in every single step needed. Saved me so much time. Also, I didn’t even know the door also opened vertically until I saw it at the end of the video
Thank you so much for your feedback! We're thrilled to hear that the video was helpful to you and saved you a significant amount of time. It's always our goal to provide clear and comprehensive instructions to our viewers. We're glad that the video was able to showcase the door's vertical opening feature, which you may not have been aware of previously. If you have any questions or need assistance, please feel free send us a private message on Facebook and Twitter (X) using the handle @LGUSSupport. We're here to help!
The instructions in the manual were somewhat intimidating, but this video made it sooooo easy! Thank you, LG!
❤️
Omg!! THANK YOU!!! This video made it a breeze to reverse the door. The printed manual made me avoid doing this for over a year! It took tops 15 minutes to get this done. Kuddos!
video was perfect for the door reversal, less than 15 minute job
Just received my 7800 set. The Home Depot delivery guys said they wouldn't reverse the door because it'd take too much time. So I kept my $40 tip. I'll attempt to do it myself, using this video. Thank you so much LG.
Excellent video! My son decided to refill a fabric softener bottle on top of the dryer... it didn't go well. Most of it went down the front, and inside the door (it was streaking down the inside of the glass). The video showed me exactly which screws needed to be removed to get inside and clean it up. He's banned from the laundry room for a week!
Great video, with one caveat: at 2:26 the caption says, "The components are now reversed." Except they aren't 🤔. The caption then changes to read, "Pause the video to double check your setup if necessary." Except if you use the video frame here to check your work, you will get it wrong 😱because the video frame shows the hardware as it comes from the factory with the hinges on the right and latch on the left.
Maybe this explains why our delivery guy had such a hard time. He assured us he could reverse the door, then spent 2 1/2 hours in the laundry room alternately looking at the video on his phone and running his impact driver(😧). When he finished most of the screws holding the door cover in place were stripped, as were three of the four hinge screws. The fourth was missing entirely. The dealer ordered us a new door, which I reversed myself and it wasn't too difficult to do a proper job of it thanks to this video. I had to buy new hinge screws, but that wasn't difficult as they are standard metric sizes that are readily available at our local hardware store.
Thank you for this video - i can't believe this didn't come this way already from the factory!
Really helpful video. Great step by step instructions. So much better than following a manual.
This was an outstanding video. The instructions that came with the dryer were not helpful at all. This video clearly walked me through each step. It took a bit of time but I did it, and there were no extra parts left over. Thank you!
Thank you for this video! It’s very detailed, it took me about an hour but because my kids kept coming in to ask me questions. Thanks for showing us how to do it.
Thank you for this video. It made reversing my dryer door easy!!
Very well done video. The pacing was good and the demonstrations were spot on. Thanks for posting this.
This is a more complicated model than ours, but the instructions were extremely helpful. Thank you!
Thank you I just followed this video along with my own common sense and it worked perfect....
Excellent video. I just made my wife very happy, and that's a very good thing!
Hi, there! Glad to hear that our video helped you make your wife very happy. If there is anything we can serve you further, just let us know by sending us a private message through @LGUSSUpport on Facebook or X. ^Danee
Would have never figured it out without this video. Excellent instructions, thank you.
Really well done video, clear and easy to follow. My one thought is that it should be made clear that regarding the four door hinge screws... The two LONG screws go on the TOP hinge and the two SHORT screws go on the bottom hinge. Thanks for posting these videos.
Thank you for adding this!!!! EXACTLY what I needed to know so that I can finish!!!
I noticed the different screws as well. I just made a mental note of that when I took them out. Other than that, this video was exceptionally clear and precise!
Thanks. This video helped me reverse my dryer door and it took me around 30 mins. Awesome.
Do you like your dryer ?
It took me about an hour as well. I had one problem with the video. At around 2:28-2:30 when it was time to double check my setup, the video had the bottom latches already swapped, but not the top and middle ones. In fact, the video had already shown these parts being swapped earlier, so that was confusing. Other than that, I was able to reverse my door.
This was a well detailed video. Including comment on latch being difficult to screw in.
Still works to this day on the 7900 models. Perfect! Thank you
Hi there. Thank you for sharing your positive feedback! Our goal is to provide high-quality products and exceptional customer service, and we're glad to hear that your LG product is still performing well. If you have any further questions or need assistance with anything else, please feel free to reach out to us via private message at @LGUSSupport. We're here to help. ^Win
My lower hinge broke. Great video showing hinge replacement.
Hello, there. We're glad to hear that you found the video showing hinge replacement helpful. If you require further assistance or parts for the replacement, please feel free to reach out to us at @LGUSSupport so we can further assist you. ^Win
This is a terrific video. We would have been completely lost without it. Thank you.
Awesome video..perfect guidance and solution! I read the manual twice, but the drawings were not very helpful. This video solved everything. Thank you!
I agree this was an excellent video. With that said, it took me about three hours. First problem I encountered was the hinge screws were so tight it took a lot of effort and a good screw driver to loosen them. I completed the directions and put the door back on.
The next problem was the top latch was not catching so I could only open the top hamper door. When you pulled on the side, it opened from the top. I had to remove all the inside door screws with door attached to dryer to jiggle the inside locks to finally get it to open on the side. I took inside cover off again, played with the side lock rod and top lock rod. I put the door back on the machine. At first I had the same problem, but after loosing some screws and more jiggling, it seems to have fixed itself.
Really useful video. Gives you every step you need.
Thank you for this extremely detailed and helpful video
Thank you for the step by step video! Worked great for me and I finally have my for serving open the way I want.
Only mishap I had was the clips on one of the plastic covers broke off while I was removing it so it won't go back on. It's a non essential part so I'm not too worried about. Thank again!
Fantastic. Completed in under and hour and works great.
Video saved the day. Great job!
Hello, there. Thank you for your feedback! We're thrilled to hear that the video tutorial on reversing the door of the LG EasyLoad™ Dryer was helpful to you. Our video tutorials are designed to provide easy-to-follow guides and useful tips on how to use your LG devices and appliances. If you have any more questions or need further assistance, please don't hesitate to reach out at @LGUSSupport. We're here to help! ^Win
Thank you for this video. Extremely helpful and accurate.
You're the best LG
Fantastic tutorial. Super easy swap.
Thanks for this video. After four years I got tired of my dryer opening towards my washer. When it was put in they told me it was better that way so it wouldn't open to the wall.
I dropped a screw down inside. How do I disasseble to get it out? Thank you.
This was a huge help, I appreciate the video.
LG makes it easy, hardest hinge swap I've ever done
Hey there. We try to make swapping the doors on your LG dryer as easy as possible. We would like to know if we can help with this more. Please private message us on social media @LGUSSupport. We'll be waiting for your message. ^David
@@LGUSA I got it done all good but waaaay tooo man steps
Hey! We are happy you flipped the door, and it's drying your clothes. For other questions, private message us on social media @LGUSSupport. We are always here to help you in any possible way. ^David
Excellent tutorial. This is exactly what I needed!
Good video, one issue though when the door is apart three small plugs are resting on the rods, and they become dislodged but not all are identical. You should review the placement of each prior to the final part of putting the door cover back on :/
Great video. Made this super fast and easy. Thanks!
I appreciated the instructions, but you stopped at the door alignment. My side opening needs to be tweaked slightly, and I don't have that information.
Perfect video! The only problem I had was the first two screws that had to be swapped (sides) went into holes that were never used before and screws wouldn’t go in. So they wouldn’t strip I got a screw slightly larger and screwed it in a couple times at an angle and then the provided screws went in tight.
What size screw did you get to replace them?? This is the problem I’m running into. The left side hinge screw holes are not the same size as the right side hinge screw holes
GREAT video. Thanks!
Perfect, exactly what I needed.
HELP- I accidentally unscrewed 2 of the 8 screws that weren’t supposed to be unscrewed and my thread panel fell down inside my dryer! Is there anyway to get that out?
Thank you so very much for this video, it really helped. Just two minor issues, since my drier does not 100% matxh the drierin the video, I had to figure out the two inner components which where different, as to how to reverse and fit for my drier.
Excellent video. Well played!
I’m so sad! I followed the directions just like they said. Got the door put back on and now it won’t open to the side. It will only open from the top. And, I can’t redo it because the only way to get the screws off is for the door to open from the side. Can anyone out there offer some advice for me? 🙏🏼🙏🏼🙏🏼
Did you figure out how to fix this? This just happened to me
That was perfect. Thanks 👍
@lgusa - I only used my dryer less than 20 times before I swapped the door. On the bottom right hinge attached to the washer, which was moved to the bottom left side, the screw holding the door to that hinge was rusted and snapped in half inside the hinge. Where can I purchase a new hinge/screws?
TY. Worked without a hitch!
Loved the video. I followed all instructions and my door will pull open down but won't open to the direction I switched it and I can't figure out why
Excellent instructions…
Great video. May want to add a warning to not overtighten the screw that goes in the nylon top lock rod.
So detail. Nice video. 상세한 설명 너무 좋네요. 감사합니다
The screws I had to remove were so tight it was ridiculous. The one behind the hinge is now stripped and I can't remove it 😬
It took Home Depot installers 2Hrs. I went down there to check on them to find scratches on the top of the dryer and all over the around the screws. I told them get the F out of here. I told them WHY?😢 I showed them in the beginning here are some shop towels. He rested the door on the top of the dryer to change the door. I’ll change the door my self when the new dryer comes again.
Thank you!!! Huge help!
Before I found this video, I attempted to do this by following the instruction manual, which is vague at best. I now have all the parts on the machine reversed, however is there a diagram that shows what screws go where exactly on the door? I have evidently mixed some screws up. Some appear smaller, shorter, or pointy, and I’m not certain where exactly they go. I know I should’ve paid closer attention when taking it apart!
Any help would be greatly appreciated.
Hello! Unfortunately we do not have customer service on UA-cam. Please reach out to our support team on FB or Twitter (LGUSSUPPORT). Thanks! ^Emma
@@LGUSA You know.. it would’ve been way more cash money of you if you would’ve just provided assistance through UA-cam
The picture at 2:26 shows the original orientation of the components, not what it should be. It’s a little misleading.
When you pause to the show that the components are all reverse you really throw me for a loop because you're showing the first screen before you actually reverse them... Am I wrong?
I just bought this dryer and washer I hope I like it will be here 29 th 🇺🇸❤️
Thank you!!!!!
Would be great if one of the hinge screws would come loose but it's not and I'm starting to strip it so I don't know what to do...
Quick question , hinge bracket is no longer making contact to machine. And quick fixes? Only makes contact if I use pressure when using open hamper wise.
Nvm…. The hinge broke lol ordered a new part via Amazon
I'm looking for a replacement for the nylon slide lock rod, and the parts lists I've found doesn't have a part number for it. My original one broke off at the bottom so I can no longer do the open from the top trick without the whole door flapping on the remaining bottom hinge. Who knows where I can find one?
I’m having the same issue. Can’t find the part anywhere. Any luck ?
@@Mack34783 No luck! Have to buy the entire door assembly. We just open the door from the side now and pretend it never opened the other way. Have considered taking the door apart to remove the top latch mechanism so nobody can accidentally unlatch the top hinge.
Thanks
Mine has different hinges, but as long as you take the face of the door off it’s a breeze.
Hi Kevin. Let's have a closer look! Do you mind letting us know what your dryer model number is? We look forward to your response! ^Chris
Mine was open like a book.... I shut it to mess with it and it opened like an oven again? I've messed with no screws. Wtf happened
This plastic opening rod stuff is very important. They should have zoomed in more or pointed out exactly where all the pieces have to be. It’s a complex hinge opening with plastic parts. 5:30
The door won’t swing open now and it only opens from the top please help!
Hi, there. We are sorry for the experience, you may access this link to check if your LG Dryer Door reversal is properly aligned: www.lg.com/us/support/help-library/lg-dryer-how-to-reverse-the-dryer-door--20153089432126. You may reach out to us if you need further assistance. ^Mau
How do I connect the DLE7300VE dryer to WiFi?
Okay. Wish me luck!
Okay. Everything went like clock work until I closed the door. It no longer swings and I can't undo the screws.
@@stephenschwab7143 how did you fix this issue? I have had the same trouble
Why mine won’t turn light on when door is open?
Hey there! Before we check the door light, let's make sure a few things are working properly.
1. Check the power connection: Ensure that the power cord connections at the back of the dryer and at the electrical outlet are secure.
2. Check the circuit breaker: Turn off the circuit breaker for the dryer, wait for five seconds, and then turn it back on. Note that gas units usually have a single circuit breaker, while electric units use two.
3. Check the drum light: Open the dryer and see if the drum light inside is on. If the light is off, it may indicate a power issue.
4. Perform a hard reset: Unplug the dryer and make sure any power outlets controlled by light switches are turned on. While the dryer is unplugged, press and hold the power button for five seconds, then hold down the start/pause button for another five seconds. Plug the dryer back in and check if the light and the dryer come back on.
If you have questions after running through these steps, please send us a private message on social media @LGUSSupport. We're always here to help out! ~ Jupe
You really have to slam the top shut to re-engage the top hinge. Otherwise it won't open from the side again.
What happens if you remove those eight screws and how do I fix it
This question can be answered by a member of our support team. Visit our website: bit.ly/3D0zJZH to chat live or call 800-243-0000! ^Leland
1:45 that screw on our model, same as the one in the video, was screwed in so tight it was not removable. Even using power tools it was not removable. Unbelievable why any assembly would tighten a screw that goddamn tight that is part of a set of pieces labeled as reversible. Had to put everything back the way it was so no, the door was not reversible. Very dissatisfied.
Hey there. We wish you could've had a better experience with your LG dryer. Sometimes, using a manual screwdriver can provide better control and leverage compared to power tools. To loosen a tight screw, first use a manual screwdriver, turning it counterclockwise with steady pressure. If that doesn't work, apply a small amount of lubricant like WD-40, wait a few minutes for it to penetrate, and then try loosening the screw again with the screwdriver. We want to learn more about your experience to see if there's any way we can assist you at this time. Please send us a private message on social media @LGUSSupport with your contact information. We'll be here to help you through this. ^ Diego
Amazing instructional video. The paper manual is not helpful at all. This video made it easy for me.
Hi, there. We're thrilled to hear that the video above was able to provide the assistance you needed regarding door reversal for LG dryers. We understand that visual guides can often be more effective than owner manuals, and we're pleased that it made the process easier for you. If you have any more questions or need further assistance, feel free to contact us. We're here to help! `Alice
That’s a lot of steps
Talk about over complicating the design so that users need to go through 30 steps to make this work.
Thxs 100X
what fun...
"duh door"