2005-2010 Jeep Grand Cherokee 4.7 & 3.7, Coolant Temperature Sensor Replacement

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 11

  • @ChrysALearnNSave
    @ChrysALearnNSave  10 місяців тому

    Hi, if you bleed the air out of her system correctly, and hopefully you have the correct temperature thermostat? (I had a similar problem when a failsafe thermostat.was used, I replaced it with a non-failsafe and everything was fine.)
    But it could be a damage gauge?
    check the cooling hoses if they feel hot or use a infrared temperature reader to see if your engine temperature is where it should be versus the gauge reading.
    Also, check to see if the cooling fan comes on?

  • @ChrysALearnNSave
    @ChrysALearnNSave  4 роки тому +1

    Hello,
    If your engine runs hot could be your cooling system faulty but it also could be a head gasket...first check the cooling system make sure there’s no air in the system after replacing the water pump check radiator for leaks make sure your cooling fan works and have a head gasket test done after all that, but for sure is not a timing chain causing the problem.
    Good luck!

  • @lstruggy
    @lstruggy 4 роки тому +1

    Would it be ok to replace this I have 07 jgc laredo 181K miles w new cat system new radiator new alternator new water pump new battery I want to change it now b4 I get issues but my temp seems to work perfectly ok 👌🏽 just doing some preventative maintenance came across this issue from yt saw it on amazon $10 should I wait till I get issues or change now? Any response would be kindly appreciated yaal! 🤙

  • @MariaDosanjos-m8z
    @MariaDosanjos-m8z 10 місяців тому

    So there’s only one temperature sensor on 2010 grand Cherokee Laredo? I know some cars have two. Been having trouble with my coolant temperature codes. Replaced thermostat, burped and bled the coolant I don’t understand why the code keeps coming on and giving me check engine light and my temperature gauge on the dash is reading completely cold.

  • @Dynamic_Anglers
    @Dynamic_Anglers 3 роки тому

    what size socket did you use i’ve tried every socket around the size and none work

  • @TheSilvrWolf
    @TheSilvrWolf 3 роки тому

    if the temp gauge is low could this also be teh problem

  • @lyqwongray6975
    @lyqwongray6975 Рік тому +1

    Where is it on the 5.7

  • @solar4677
    @solar4677 5 років тому

    Thanks it help me replasing my jeep sensor

  • @tolisapostolis6910
    @tolisapostolis6910 5 років тому +3

    👏👏👏👏👍👍👍👍😀😀😀😀

  • @ChrysALearnNSave
    @ChrysALearnNSave  3 роки тому

    Hello, this is the short version of this repair.
    -You can see the full video at my website:
    youfixnsave.com/
    -Just click on the link below the video in the description box or go to: youfixnsave.com/product/2005-2010-jeep-grand-cherokee-4-7-3-7-coolant-temperature-sensor-replacement/
    -Also there you get a free to download, factory service manual for your Jeep to help you with all your car repairs.
    -Good luck with your project !