Diamond X6000A VHF/UHF Triband Antenna and MX3000N Triplexer

Поділитися
Вставка
  • Опубліковано 19 жов 2024
  • The Diamond X6000A VHF / UHF tri-band antenna and the MX3000N triplexer review were filmed for the ARRL QST magazine with a re-publication authorization (ARRL copyright). For my French viewers, pour mes abonnés français, malheuseusement cette vidéo est uniquement disponible en anglais, vous pouvez par contre activé les sous-titres français. Merci de votre compréhension.
    73 Pascal VA2PV

КОМЕНТАРІ • 34

  • @fabienburguera386
    @fabienburguera386 4 роки тому +3

    tres bonne video. Merci Pascal. 73

  • @KarlKrogmann
    @KarlKrogmann 4 роки тому

    Pascal! Love your video work, especially your intro music. Keep up the good work.

  • @davidschwartz9636
    @davidschwartz9636 Рік тому

    Thank you for making this video, it has helped me decide on my set up.
    I have recently bought for myself an Icom IC-9700, and was wondering how best to set the radio up. Just like you I had a dual band antenna and didn't have room for another antenna for 23cm, so needed a try-band antenna. - I have gone for the same set up as you, same; antenna, triplexer, coax, and connectors. This is because, you've chosen quality equipment, also because you, with the help of your friend, tested it all with a spectrum analyzer and proved it to be a good set up. - Thanks to you and your friend for doing the hard work!
    Regards, David (M0XQZ)

  • @ЛидияПлешкунова-я1я
    @ЛидияПлешкунова-я1я 2 місяці тому

    Tnx from UT5RQ! 73 & GL!

  • @johnratcliffe6438
    @johnratcliffe6438 4 роки тому +1

    I have this antenna and love it! :)
    I use mine for FM and also for reaching out around 40 miles to my nearest D-Star repeater with my 9700.

  • @madmax9813
    @madmax9813 3 роки тому

    great video pascal, thanks for the help!

  • @Pascal-F11DRE
    @Pascal-F11DRE Рік тому

    Bonjour Pascal,
    Tiens Tiens ... J'utilise la même station de soudage fer + air chaud et alimentation.
    Elle est pratique, à l'exception faite des câbles qui trop courts
    73's QRO Merci encore pour vos vidéos

  • @mikeklemens8970
    @mikeklemens8970 4 роки тому +3

    I am using the Diamond X6000A triband antenna and MX3000 Diamond triplexer. It is 20 feet at base having about 4 feet below the highest roofline and 6+ feet over the roofline. Great performance for about 30 miles of local repeaters. Looking to move it up higher to 100 percent above the roofline soon. Mike N6IMY

    • @Laboenligne
      @Laboenligne  4 роки тому +2

      Hi Mike, line of sight is very important in VHF and UHF, the higher the better! 73 and thanks for watching, Pascal VA2PV.

  • @va2dv1
    @va2dv1 4 роки тому

    Salut Pascal, bonne vidéo ! J’utilise du RG-11 de Belden (déformation professionnelle) avec les connecteurs PPC et des adapteurs F-Pl-259. Ça fonctionne très bien en HF. En VHF-UHF il faut parfois « trimer » la longueur un peu pour pour ajuster le ROS mais ça se fait bien avec les outils pour les connecteurs. La perte est très proche du LMR-400.

  • @roadsidediner-video2792
    @roadsidediner-video2792 4 роки тому

    Thank you for a great video Pascal. I've been trying to decide between a Comet GP95, Comet GP98 or a Diamond X6000 for my IC-9700. At present I've been using two antennas, a Comet GP3 and a Comet GP6 for 2 meter and 70 centimeter, with nothing for 23 centimeters. I've had good luck with Comets in the past, so I had only been looking at them, but after seeing your video, now I'm considering a Diamond X6000 with the triplexer.

    • @Laboenligne
      @Laboenligne  4 роки тому

      In my opinion, the quality of the Comet and Diamond antennas are very similar. I believe they are the same company now? To be confirmed. 73 Pascal VA2PV

  • @HamRadioConcepts
    @HamRadioConcepts 4 роки тому +1

    I have ordered one of these Pascal, for my 9700 as well. Hey, love the videos. Can you tell me how to pronounce Laboenligne or what it means? I am having a hard time trying to figure it out. I had dinner at the Yaesu dinner with one of your good friends last year, he knows you well.., and he pronounced it right away but I forgot how HAHAHA.. Thanks

    • @Laboenligne
      @Laboenligne  4 роки тому

      Hi Eric, thank you. Pierre told me he met you at the event last year, he’s also a French Canadian. Laboenligne in English mean “online lab”, in French it’s three words to say the same thing, “Labo” (short for laboratory) “en” (for the on… in English) and “ligne” for the “…line”. You can type in “labo en ligne” in google translate and select French, click on the speaker and you will ear the correct way to say it, I check it out and it comes out perfectly. Thanks for dropping by, you’re probably one of the most popular hams on the planet and it’s an honour you took the time to ask. I was hoping to meet you at the Hamvention this year, but I don’t think there will be an event with everything going on right now ☹. I’m very excited today as I will reach my 10000 subs in the next few hours, maybe minutes… 73 Pascal VA2PV

    • @HamRadioConcepts
      @HamRadioConcepts 4 роки тому

      Laboenligne.ca thank you buddy. I was very close in the pronounciation. You made it clear. I don’t want to be the most popular in the world HAHAni am just another ham like you. We all contribute videos and education to this hobby. We all do it differently, that is what is great. You have a very easy way of speaking and makes it comfortable to listen to, but me, I am too excited HAHAHA. Keep it up buddy, great video stuff. I watch you all the time. 73

    • @Laboenligne
      @Laboenligne  4 роки тому

      @@HamRadioConcepts Thanks Eric but you are well known ;-) Me too I watch all your videos, 73.

  • @Andy71
    @Andy71 2 роки тому

    Hi, what software are you using to display the real time screen readout of the IC-7300 on the right hand monitor behind you? Kind regards, 73 - Andy.

  • @davidgrant2725
    @davidgrant2725 4 роки тому +1

    Very nice. I use a tri band comet antenna and LMR 600 Ultra flex. I use an icom-ID 1 for my 1.2Ghz radio on my antenna tho. and VHF UHF Kenwood 5700 and 5800 .

  • @M0JHN
    @M0JHN 2 роки тому

    If your radio only has one input why do you need a triplexer, I thought this is only for connecting multiple radios to one antenna? Looking at getting the v2000 for my IC-705.

  • @CrisisGuildWOW
    @CrisisGuildWOW Рік тому

    only has room for 1 antenna, but installed it on his tower that already had at least 2 antennas on it? looked like a 50 or 60 ft tower? Can put several antennas on that with side arms. Jus sayin.

  • @VE2KRN
    @VE2KRN 2 роки тому

    Salut Pascal!
    Besoin d’un conseil d’expert comme toi.
    Je me cherche un triplexer pour relier une antenne dual band X-300 Diamond mais je dois la relier à 2 transceivers VHF/UHF et un scanner mobile tous les 3 dans ma demeure. Est ce que qu’un triplexer Comet avec prise femelle ferait la job pour mes besoins. Merci Pascal et toujours intéressant d’écouter tes vidéos.
    73 de VE2KRN Rouyn-Noranda.

  • @raymondmartin6737
    @raymondmartin6737 4 роки тому

    Some time ago I had purchased a used
    Yaesu FT-736 multi band VHF-UHF
    transceiver from a dealer for $1800.00,
    US, with 144, 220, 432, and 1296 MHz.
    I had a tri- band Diamond. I think it was a X-3200A, with 3 bands, but no 23cm.
    It had 10 watts output on that band's
    module, and I had one SSB QSO with
    a nearby mountaintop during a VHF-
    UHF Contest, so I know it worked.
    However, I didn't have a very low loss
    coax then, and the antenna was not
    a close match for 23cm, so this did
    limit my QSO's on the 23cm band.

    • @KarlKrogmann
      @KarlKrogmann 4 роки тому

      Don't ever sell that radio man. Those things are damned near the best 145/435/1296 MHz rigs ever made.

  • @Dg-zj6jo
    @Dg-zj6jo 4 роки тому

    how do you do other bands please then with a triplexer as the radio is all mode

  • @jlocana1
    @jlocana1 3 роки тому

    thanks

  • @stephanele4968
    @stephanele4968 4 роки тому

    Bonjour , cela serait sympa en francais , merci pour les belle vidéo 👏, pour quand Icom 705 ?

    • @Laboenligne
      @Laboenligne  4 роки тому

      Peut-être en août au Canada... 73

  • @sergeplaut4217
    @sergeplaut4217 4 роки тому

    L'icom ic 9700 est un super trx , j'ai le mien depuis lundi matin

    • @Laboenligne
      @Laboenligne  4 роки тому

      Toutes mes félicitations Serge, des heures de plaisir à l'horizon ;-) 73 Pascal VA2PV

  • @johnkershaw9575
    @johnkershaw9575 4 роки тому

    Wonderful video and very informative. Thank you. John N6NRO

  • @regybar2553
    @regybar2553 4 роки тому

    merci mes de coutume tu les envois en français Tes Tube