2007 GSX-R600 FI ERROR CODE C46
Вставка
- Опубліковано 7 лют 2025
- For those who are trying to pull out the black wire with the brown stripe and brown dots running along down it. There are two of them side by side. You will see four numbers around the plate of the wiring. When you see the number 34, count four wires back from that number. It will be the first of two of the described wires. Pull that one out. Be warned the wire has a metal casing around the wire going down into the housing.
For fault codes list:
Please refer to www.gsxr.com/3....
Thanks it works, Regards from Portugal
I have a 600 k7 i found a broken wire that had rubbed on the framework at the front end becasue it kept on blowing the main 30amp fuse and running for 5 seconds then cutting out fixed wire started bike again it now does not blow the fuse but still cuts out after 5 seconds any idears mate?
Is this the same for a 2008 750 gsxr?
I need to see where them plugs are
Can some tell why my code won’t go away. I removed the 5th wire from top right of back plug the way manual said and I’m still getting the c46 light
It’s because you still have your Cadillac converter on
how to fix Code C 40 please can you help me
So all you have to do is cut that wire because i’ve seen people that cut the wire and otheres set the valve what you i do help please ?
Chadi Bouzoubaa I didn’t cut the wire I just simply pulled it out. The wire is attached to a metal component that clamps the end of it. I wouldn’t recommend it.
Hilaire Tucker isn’t the same thing disconnect or cut the wire!
Omar Rodriguez respectfully, would you say that unplugging a cell phone wire is the same as cutting it? Cut and unplug are two different words with two different meanings in this context.
Hilaire Tucker ok let me explain my self it does the same fiction if you cut or unplug it!
Will this cause the battery to go dead
Deanthony Henderson no, I didn’t have any issues afterwards.
If you’re having battery issues, it could be the alternator or stator that need to be changed. Trust, I had changed both of them after pushing almost 400lb of bike 2km on three separate occasions due to it dying in mid transportation.
Ever had any issue after that? like running lean or something?
Akhand 83 it’s been good thus far.
Hey dealing with this issue now, there are two black with brown stripped wires at the 5,6 spot back from 34 can you help me out?
Did you figure it out? Mine says it’s the 5th wire. I removed it and the c46 is still on
Got one on my 2022 gsxr 1000…