Finally Driving Samcacs Ferrari 599 It Almost burnt down!
Вставка
- Опубліковано 3 бер 2024
- Want An Easy way to clean your cars fuel system Check Out TECHRON At your local Auto parts or Walmart!
What's going on guys In todays video we Work On samchracs Ferrari 599!
Check out my brothers! Channel / 23rdgarage
Subscribe! ► / vtuned. .
Instagram ► / vtuned
Check out Safety Restore! www.safetyrestore.com
---------------------------------------------------------------------- - Авто та транспорт
Want An Easy way to clean your cars fuel system Check Out TECHRON At your local Auto parts or Walmart!
Ya i used that in my highlander with 30k n i somehow got 27mpg? Probably wont once i fill up again 😢...usually gets 21😂😂😂
POMB = Piss Out My Bottom
and still nothing on the shop kitty....come on man, intro the little guy ffs!!!
@@muskokamike127 I second that notion!!
It works great! Used it in my 210K 99 Ford Expedition!
Samcracc's new daily driver! Sam will be so excited to see this one come home to his cow pasture... his squirrels have been missing their nest.
He'll just park it in the cow field and leave it there.
That guy treats cars so bad leaving them in the sun
Literally just rotting in fields. At least he doesn’t buy new cars and just destroys 20 year old unwanted cars.
Typical Chicken Farmer...😂
Remember buddy, the shop is a reflection of the mechanic. If people spill stuff on the floor and leave it, if they leave trash on the floor, if they treat it like crap, it is a direct reflection of the owner/operator. Many years ago I worked in a hot rod shop and you could’ve eaten off the floor or the walls at any given time. And all of the guys tools, tool boxes, etc. were immaculate. Made you proud to be there.
The only problem you will have now with the lift location is you won’t be able to raise a car all the way up with the garage door open.
Sam's stepmom should stop by and thank you for fixing this
I watched your lift being installed yesterday. Shout out to 23rd Garage!
Can’t lift a car with garage door open with the new lift position
Man, been waiting on this moment. This is the reason I started watching the channel.
Sam's cows anxious for the Ferrari return to the farm, so they have another fancy exotic brush. Doing some freestyle bodywork.
The 599 has the "F1" shifter setup, not a dual clutch. Basically these cars were born as manual shifter cars, with a flywheel/clutch/pressure plate at the back of the engine and a six speed transaxle at the rear of the car. But only 10 left the factory this way. The rest got the electro-hydraulic F1 system, which uses a computer to operate the clutch, move the shifter forks, and close then open the throttle between gears. The 599 was the last V12 Ferrari to use the F1 system. This makes them also the last Ferrari you can convert to three-pedal operation, by stripping off all the hydraulic rams and installing a clutch pedal and a shifter tower.
The 599 was the first Ferrari to use the "Enzo" engine, which has timing chains, not belts, and the first front engine 2-seater to use an all-aluminum chassis.
You probably figured it out, but the difficulty getting Reverse is probably just a bad connection at the push buttion. Unfortunately, difficulty in getting Reverse can also be the first sign of a worn out clutch.
the 'corrosion' on the cinder blocks is called effrourescence. It's caused by moisture coming in through the blocks and depositing the chemicals brought with it. Needs to be scraped and cleaned and painted with sealer such as UGL, avail at all big box places.
Looking forward to seeing the Farrari with new paint. Cool to see your shop upgrades too!
I’m glad you uploaded a video today because everybody else is lacking. None of the other UA-cam channels that I watch which is like 15 hasn’t uploaded a video today so I’ve been scrounging
No Goonzquad, no Samcrac, no Tavarish, no Rich Rebuilds... It's really lacking out here. But we got Ben to save Monday for us!
seeing the 599 finished, test driven and back to the owner is going to me monumental.
That Ferrari model 599 is gonna be a classic and soon. One of the best engines before they got ridiculous, a really sweet V12.
Sam is going to be pleased with the progress. Good job, my dude.
Great seeing new content, welcome back lol. Seriously though, it’s nice to see the Ferrari finally coming together, looking nice. It’s very good seeing you clearing up and tidying up the shop. Should look incredible once you get it all painted and the floor taken care of definitely looking forward to the end result.
I am so glad Sam's Ferrari is showing progress. 🙏🏻
Keep on keeping it up Ben.
👍🏻👋🏻
props to you man for keeping at this project 🔥
I bet Samcrac is doing jumping jacks rn 😂😂😂😂
Are u frigging kidding me brother, jumping Jack's?😬🤷🤔🤔
With Samcrac that's gonna depend on the size of the bill. One thing comes through over and over in his videos, and that's that he hates spending money on his cars.
I'd like to see his stepmother do jumping jacks.
We don't even know who that is. Samcrack. Sounds like a basehead
@@cryptodetective8226 you don't know who he is? 😦
The color matched rims with the engine covers is classy.
That bubbling on the concrete walls may be effervescence which comes from moisture. Make sure you seal the block before painting it or it will come back. Or use a Drylok product.
Moisture probably coming from outside. Wicking thru the brick and bubbling the paint.
I saw your Mustang in the background. I remember when you won the bid on it and how excited you were for it being so relatively clean. Are you gonna finish it? Or is it a fallen soldier?
I Love the shop cat bro! Make sure the garage doors clear! -You can always get roll-ups.
FINALLY!!!!!! I'm so glad you are almost finished. It looks fantastic. This car is the reason why I started viewing this channel. Great Job and great content.
Where were you, missing those videos
If anyone could fix this V can. What a long ride.
Oriellys is awesome - I had a dead battery and one of the guys brought a jump box and rescued me (dont live far from there) got it going and went back to the store and the guy installed my new battery.
The wheels set up is great 😂😂😂😂
I'm glad to see you posting a video Miss seeing them excited to see the upgrade to the shop
invite one of those grafiti painter to do the wall for you ,
Beat me too it I would have the wall graffiti also buddy did inside of garage looks awesome
Awesome and outstanding as always.Thanks for sharing and taking us along
Despite the current volatility in the stock market, there's still a world of opportunity out there! I've been reading up on Bloomberg and other finance media, and they've been sharing stories of people making incredible gains, like over 250k, in just a matter of weeks or a couple of months. It's like a wealth transfer happening right in front of our eyes
when it comes to navigating the market? Seeking guidance from a consultant or investing coach! It may sound obvious or generic, but trust me, it can make a huge difference. Personally, speaking with a consultant helped me stay afloat in the market and grow my portfolio by about 65% since January. It's all about getting that expert advice and support to make the most effective moves in the business.
What you really need is an expert's guidance. A professional to teach you how to trade and help manage your account. There are a lot of fakes when it comes to investments, so be careful before you invest. Make thorough research first.
I've been looking to switch to an advisor for a while now. Any help pointing me to who your advisor is?
Honestly, I'm surprised that this mrs brenda leigh is mentioned here, came across a testimony about her from one of the beneficiaries on the CNBC news, she seems to be doing extremely well
It's high time I get connect with Brenda Leigh . I have heard a lot of testimonies about her and also see few of her interviews on the internet and CNBC
Tons done today Ben! Good to see you get SC’s Ferrari closer to booting out the door. The hoist will be a big plus. The wall up in front looked like it’s reacted to water. It almost looks like an effervescence effect. I’m not sure I totally understand what you’re gonna do with the floor, but Travis from Shop Nation put on an epoxy finish in his garage, and it turned out fantastic. That said it was a lot of work. He rented a machine that blasted or peened the floor and got it ready for the epoxy finish. It will be fun to see what you wind up doing there. See you when the next video drops.
Keep rockin on man,doing awesome job
Dude, I love your determination!! Great job with your troubleshooting and fixing the ferrari!
Who would have ever thought that a group of kids in a smaller city in GA would have so many exotic cars running around.
Great to have you back ! Those bubles on the wall are humidity, you might want to check on the outside for filtrations.
LEGEND
I don’t care how long it takes this car and the series to finish this is cool to watch.
Keep up the good work
great stuff thanks
Glad I watched your brothers video so I could actually see the lift installed but it's nice to see you upgrading.
Nice lift and it is really nice to see you clean your shop and new paint is gonna be amazing. Keep it up Ben. ♥️
I was pretty happy to see you have what appears to be a shop cat keeping you company!!
Let’s giddely-goooo! Would love to do what you do one day! Great inspiration, keep ‘em coming Ben!
“That build that never gets finished” isn’t that all Sam Cracs cars !!😂
Looks good
about time 😆 keep on that grind
Actually pretty damn excited for the shop remodel
Thanks! Keep it up. Coffee for you!
Great video, Ben. Really enjoyed seeing progress on the 599. Have you named the kitty?
Cant wait to see it painted.
That was a lot of progress. Well done!
i laughed so hard at the grafitti part!!! It's really harder than it sounds! keep it comming Vtune!
tnx for the video
Its amazing how far the Ferrari has come!🎉
Finally!! Get’er done 👍🏻
We love the video and work 🤗🙌🙌
Nice job! 👌🏻👌🏻
Gaps Are Perfect
Maybe good idea to build the old lift with some frame into a trailer? then you have a mobile one. Great to see the 599 can be soon painted and returned. Big up!
Nice work as always can't wait to see whats next never a dull minute when v tune puts out a video 👍
Awesome 💯
I love the orange wheels!!!
Great progress , Sam has to be estatic! Great episode.
Dear Ben,
It’s really great you got so far with the Ferrari 599 because this car was a long time in your shop. I guess you now soon will be able to finish the repair of this smashed car.
Nice car-lift you’ve bought so I hope this helps you a lot better than the previous blue one.
I look forward to your next vlog and send you love from the Netherlands
Looking awesome 😁💯
Awesome you have a shop make over.
Amazing
Not much for Ferraris but really impressed with your skill and the channel rocks.
Me encanta tú progreso!! Bien ahí
Amigo!! Te sigo desde siempre..
La luchas a morir!! 😊👍 te felicito!!
Nice work as always. Looking forward to the boat content!
Great to see you nearly getting rid of that Ferrari ! Looking forward to seeing the shop renovation 👍👍
I love the 599! I want one so bad. I can’t believe how long this car has taken to come back together! WOW! Still needs SO MUCH work!
Excelente...
Man wish you Madd luck on the 599 & getting it to the finish line. Stay motivated..
Finally - got the story on the VT tag. also - its satisfying to see that ferarri moving along.
Put the old lift outback for pulling parts
I really enjoy the trip you made to Oh Rileys. More of that kind of content please.
The best builds on you tube
Just one thing you may want to be careful with those new lifts installed in a different location on the foundation...Usually when you are building a shop where your lifts are they reinforce the areas for where the lifts bolt to the concrete...Those areas are usually reinforced with more rebar and depth...Anyways aside from that, Great videos and work as always!
Can't wate to see the shop looking good. Love your Chanel bother.
I remember in the olden days we used to use water mixed with anti freeze as our coolant.
Good deal.
I appreciate the video
Very cool 😎
I love you taking risks on these old rare/part cars! But in the end the end there isn't much demand for them. I restore and collect 70-76 2002 beemer parts and there is still a huge draw and inventory for those. thx Ben.
Nice,definitely been awhile but you knew you could fix it,tell Samcrac next time don’t call you until he has all the parts,in hand.great video,just keep doing what your doing and carry on.😎😎😎👍👍👍
Would love to see what you can do with and old Datsun 240Z
The corrosion on your shop wall is likely the lime leaching out of the block. It can happen if it's exposed to alot of moisture. Congrats on all your progress with the shop brother!
Definitely like older body style.
Great stuff. Looks like you will lose some height on the lift with the garage door up. As my father used to say to say, a clean shop is a much more efficient shop. You can find your tools and move around without getting hurt.
Nice video.
One of the best looking ferraris in my opinion. Also loving the two tone white and black look 😂 I vote an old school ae86 paint scheme
599 is coming along. Kitten running around looks just like 2 I just got, Love All Cats.
Wait, why did you install the new lift closer to the door when you said you were installing it closer to the wall?
The install video was on 23rd Garage, the lift was too tall to go closer to the wall. It wouldn't fit because the floor slopes higher closer to the wall.
Doesn't look like it'll clear the garage door either. And why not mention that in this video as well?
I would use that old hoist outside and put both new ones inside
The stuff on your blocks in your shop is called “efflorescence”. It’s the salt being leached out of your blocks from being wet. It means you should dig out and re-point and liquid rubber that spot outside and refill with gravel before it messes up the shop wall.
I will recommend that you just use NAVY Deck gray paint and paint the floor. Don't use tiles.
Cool 😎 !
Samcrac probably forgot he owns it, just keep it. : ))