MOZA Mini-P Camera Installation and Balance Tutorial - 2
Вставка
- Опубліковано 25 тра 2020
- Compatible with multiple devices such as smartphones, action cameras, and light mirrorless/DSLR cameras, the MOZA Mini-P is the perfect gimbal for traveling, filmmaking, or just capturing life. The foldable & sleek design allows MOZA Mini-P to be easily folded down to the size of a novel and stored into a backpack or a day bag.
Timeline
0.00-0.27 Install L-bracket Quick Release Plate.
0.28-1.11 Unlock Motor Lock
1.12-1.39 Camera Installation
1.40-3.22 Balancing the MOZA Mini-P
3.23-3.41 Balance Check
To learn more: www.gudsen.com/moza-mini-p
Like us on Facebook: / gudsenmoza
Follow us on Instagram: / gudsenmoza
Follow us on Twitter: / gudsentech - Фільми й анімація
Love it. Always when I do it.
Gimbal works fine once balanced properly although it has a low tolerance to out of balance set up and will vibrate. The simple addition of a filter or zooming a lens can result in vibration. Markings on the mode dial are indecipherable to older eyes, even with glasses on. So far so good in operation. Better than Zhiyun so far.
Thank you!
WOOOOOW We use it!
great tutorial and great product, I watching this primary because align PAN axis is not much clear from manual, now I understand how to do properly :) I use this gimbal with handycam SONY HDR-CX405 and it works perfectly, I just must made simple adpater to mount on L bracket but it still works perfectly with this camera.
hi, is canon m50 and m 50 mark 2 with 14-55 mm lenscompatible with Moza mini p ?
How hard is to turn the lights on and have the cut shots to show what parts are you working with? I had to watch other tutorials to understand what you are doing !
Does it charge a Sony camera while connected to the gimbal with the included cable? Thank you
Is there any way to stop the sounds coming from the device? It's very harsh when it turns on and off. I use it outdoors in natural environments and would love for it to be silent or at least less abrasive.
Hi, can you please contact our service center to check out if the product itself got some issues, support@gudsen.com, thank you.
nice!
Nice
Tell me please which application we need to install in phone or we can use just buttons without application
Hello, it is the MOZA Genie and MOZA Master APP.
How much days it takes to deliver the product to india?
I bought this, but it's perfect. I should have bought it earlier.
Thanks for your support!
hi, is canon m50 and m 50 mark 2 with 14-55 mm lenscompatible with Moza mini p ?
hi, is canon m50 and m 50 mark 2 with 14-55 mm lenscompatible with Moza mini p ?
Yes, it is
Do you have this combination? How is it working if so?
👌👌👌👍
Friend, thank you for the video. Please take off your mask & let us see your beautiful smile. 😃 God bless!! 💟Kim in Colorado #CommieCough #Conjob19
Hahah,we need to wear mask bcz of covid-19.
Done as video but motor somehow shaking, any help?
And I cannot Update Firmware
Hello，please check this out：ua-cam.com/video/dfAvXKMZvB8/v-deo.html
@@GudsenMOZA It said that I need to authorize device
@@hoangphihung6017 Could you please make a short video to show the issue?
Orange led blinking in my moza mini p , what's that mean.
Would you please contact us via
Email: support@gudsen.com
Skype: MOZA Official Support
and send necessary information including purchase receipt and video demonstrating the detailed problem?
Help!! When I turned on mine for the first time. The entire gimbal vibrate. I tried to adjust the bracket to balance it but no luck 😭
Hi there, please reach out to our service center for help, support@gudsen.com, thank you!
09.12.20 приобрёл данное устройство. Две недели пытался настроить всё делал по инструкции, пересмотрел много видео по настройке. На стабилизатор устанавливал разное оборудование, зеркальную камеру весом 486 гр., смартфон, экшн камеру, простую фотокамеру (мыльницу), но положительного результата не получил. Делал калибровку, в некоторых случаях калибровка не всегда доводится до конца, моторы уходят в спящий режим, либо, во время работы моторы уходят в спящий режим и камера просто болтается, иногда после калибровки моторы сходят сума, их буквально болтает с большой силой в разные стороны и снова впадают в спящий режим. Не большое отклонение вправо или влево, порыв ветра и снова стабилизатор отключается, включает спящий режим моторов. Пробовал настраивать через приложение MOZA Master, не помогло. Ну не может же быть, чтобы настройка такого простого девайса занимала столько времени. Произвёл обновление ПО через MOZA Master, обновление 100% закончилось удачно, устройство выключил, пытался запустить, но оно превратилось в КИРПИЧ, больше не включалось, а сброса настроек до заводских в данном девайсе нет. Как быть? Только сервис. Обратился в сервисный центр по гарантии, там объяснили не видитесь на рекламу, всё, что вещают про простоту автоматической настройки, туфта, лучше настраивать вручную. В сервисном центре устройство восстановили, но оно выдавало ошибку, признали производственным браком. Магазин сделал возврат денежных средств. Производителю тоже писал несколько раз о данной проблеме, но так и не получил внятного ответа. Есть повод задуматься.
Would you please contact us via support@gudsen.com and send necessary information including purchase receipt and video demonstrating the detailed problem?
@@GudsenMOZA Я вам уже несколько раз писал, что устройство сдано обратно продавцу. Сервисный центр признал производственный брак. Техническое заключение я Вам переслал. Квитанцию о покупке, контакты продавца, тоже переслал. А вы всё просите какое-то видео.
I can't balance with a 18 55 put on my canon m50 the body collides whit some part of the gimbal, impossible :(
Hello，you can send us your problem ：support@gudsen.com.We'll help help you fix that.
hi, is canon m50 and m 50 mark 2 with 14-55 mm lens compatible with Moza mini p ?
After update firmware there is a big vibration.
Hello, don’t worry，please write an email to support@gudsen.com for professional guidance.
I came here for a tutorial, why am I sad.....?
MCSC C1 cable store.gudsen.com/products/mcsc-c1-cable?variant=32323324280903
The cables used for NIKON and FujiFilm are not included.
この製品を買って以来、別売りケーブルだの、アプリとの連携が切断されるだの気苦労が絶えない。DJIも使っているが、機能で優れていると思ったのに残念でしかない。
Why are you wearing a covid mask? I’ve so many questions?
Is fucking difficult
It's complex😂😅
Oops😂😂😂
Why are you wearing a mask if you are the ONLY person in the room? I mean... it's not like you could possibly get COVID from the internet? I've seen this a bunch... if you were in the room with others, sure... but by yourself? It's like the people driving in their own car with the windows up wearing a mask. I don't see the logic.
Not well presented.
No! Stop not the annoying music again, it’s in all the tutorials, make it stop
Gudsen doesn't honor the warranty on their products. I wouldn't recommend any of their products. BUYER BEWARE. No matter how well it performs, if it doesn't hold up under light use, it's still a piece of junk in the end.