Building an Axle Truss From Scratch! Oldschool High Pinion Dana 60
Вставка
- Опубліковано 2 жов 2024
- Shirts, Hoodies & Stickers: flawedoffroad....
Finally got the axle truss build for the kingpin 60! Let me know what you think!
→Tools I used:
Flexible Welding magnets: amzn.to/3x07kFb
Line Laser: amzn.to/3IFMI7z
Contour gauge: amzn.to/3TEu5ak
Plasma Cutter → Yeswelder Cut55DS PRO: bit.ly/Cut55DSPRO (Don't forget my discount code Flawedoffroad)
My Welder: bit.ly/3B9Zg2k
My Amazon Favs! www.amazon.com...
🔥Partner Discounts🔥
Use my code: Flawedoffroad
To save 10% at the following companies!
--------------------------------------
⚡YESWELDER⚡ yeswelder.com/...
🌟Yankum Ropes🌟 yankum.com/?afm...
🔦Auxbeam🔦 15% Code: FLDORD15 auxbeam.com/?s...
I'm an onX Offroad Trail Guide, use code trailguide30 for 30% off a subscription
-----------------(I earn a small commission from these affiliate links)------------------------------
Follow me on Social media:
Instagram - / flawed_offroad
linktr.ee/Flaw...
revkit.com/hel...
#jeepyj #yj #dana60
Disclaimer:
Due to factors beyond the control of Flawed Offroad, I cannot guarantee against improper use or unauthorized modifications of this information. Flawed Offroad assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flawed Offroad recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flawed Offroad, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flawed Offroad.
This video and description has affiliate link(s), which means that if you make a purchase after clicking one of the links, I’ll receive a small commission. Which helps me continue to make more content.
This is the Yeswelder Plasma cutter I used: bit.ly/Cut55DSPRO
This is how you save 10% on it: code- Flawedoffroad
Hi, my name is Nanan and I am a member of the procrastination society. I have made zero progress on my 1 ton swap on my YJ in over 8 months...
HI NANAN!! Thank you for sharing your story today that was very brave
Wow your editing skills are on fire! I’ve noticed a significant improvement in your videos. Keep up the great work!
Thanks my dude. Most of the time I don’t have enough time to put a ton of effort into it cause I’m doing it last minute. but I spent a whole Saturday doing this one. 👌
Haha Dan the muh fuh man. Preciate the content and your time.Enjoy watching you solutionize and your yj love!
My Yeswelder cut 55ds died after very little use. Hopefully their pro model works better for you. Thanks for the video!
Got leaf springs on all my wheelers and trucks 😉
Nice job glad you got it done
You're a member of Procrastinators too? Probably would've known that if I ever went to the meetings, but I always figured I would go next month.
Haha you win 🥇
I dunno Dan. Wonder if it's strong enough? Maybe you should have gone with 9/16 instead of 1/2 inch stock. 😱🤣🤣 Nice work/video! Less than 2 months to Moab. 🤗
I used what I had lol. I ran out of 3/8”.
Moab is looking very slim for me between not having PTO and being a long way away from having this axle installed and working
Pro tip: when you're doing your CAD anytime you are doing a small enough piece that you could use a cereal box, It works much better than corrugated paper. It is much more precise and easier to cut.
Oh I use that kind of cardboard all the time. For this application I kind of wanted it to be able to stand up and hold it shape a little better which is why I went with the corrugated. If you watch my channel long enough you’ll see plenty of examples of both. I’ve even made gaskets out of cereal box lol
It's good to see some progress on the old 60. My barnes truss finally showed up today for mine. Yes... I'm cheating. 😁
Dude if I could buy a truss that didn’t cover the leaf perch…..I would have lol.
@@FlawedOffroad right. As you said, no one cares about you leaf spring guys any more. 🤣😂
That axle “ain’t goin (to bend) nowhere!!” Lookin good.
Thanks!
I’d hope not!
Keep it up Dan!!!
I try. So much going on right now it’s difficult to make solid progress. Wish I could have time off my main job so I have time to do my second job😅
Great video.
Editing is on point for sure!
I’ve had pretty good luck with my Eastwood plasma. Does leave some slag sometimes but the quality of the cut is usually related to how steady my hand is.
Thanks man. On these longer videos I have to add a little bit of razzle dazzle lol
Stay strong leaf brother!
I'd definitely fully weld it. I've welded several trusses to axles and did gears after and have never seen any issues when I set up the gears.
Yep I did, I kind of stitched half of it then a few mins later filled in the rest lol. It worked out. When you gonna post another vidya?
I know the feeling about the stray sparks burning the house down, i stop all hot work 45-60 min before im ready to go in for the night just so I can be sure nothing catches fire. It sucks when you have to find little things to do that dont involve plas, grinder or welder.
Yeah I always do that too, even that night. My girlfriend’s dad lost his 2 story shop with an upper apartment. Welded and a spark must have got in the wall. It’s even worse being an attached garage cause I’d lose my house too
@FlawedOffroad same boat the garage is right against my kiddos rooms I have zero room for error on fire watch. I also blanket things that are likely to catch and then move the blanket after. Paranoid I know but it's worth the effort.
Sell me that 44 front locker 😂
its a 60
@@FlawedOffroad you're rocking a 44 currently or you still got that duragrip?
@@FlawedOffroadjust saw the ending trying to sell the 60 locker. Opps
the 44 has duragrip still. but its staying in there for when I sell the whole axle. heck just buy the axles, my front and my spare matching 60 rear both 5.13 lol@@jeepindave5464
4.7 4.7 out of 5 stars 857
Diablo D0748CF STEEL DEMON 7 1/4 inch 48 Teeth Metal and Stainless Steel cutting Saw Blade CERMET II Carbide Up to 5X Longer Life
Metal cutting blade for circular saw
23:37
Do those run at the same RPM as a standard circular saw or do you have to buy the special evolution saw for slower rpm? I have the evolution chopsaw which is very nice.
@@FlawedOffroad run at full speed of circular saw. I have the evolution 9in metal saw, runs bid slower. Cut My . 750 in weld table like butter