Big help for knowing what chemicals and making sure I understood and was right about how to set the heat! Also A+ for showing me the blue piece was part of the cover on another video! We just filled ours and hope to try it tomorrow!
In order to keep it warm does it have to be ran all the time. Does it run up the electric bill a lot if so. I've had mine running for about a week and starting to think maybe it's not a good idea because it will be expensive. Is it better to shut off and only run it 24 hours before I want to use or
My electric bill is quite a bit higher up here in North East winter. This is to be expected after all. It’s been quite cold 30’s, dipping to 20’s and at one spell in the 10’s. The tub did well. We keep ours on a three season porch with the tub cover on when it is not in use. I’m sure we over chlorinate. If you keep your temps high, you’ll need to add chlorine more often. We were told by our local spa company it should be a 1:2 ratio chlorine to shock. The timer is easy to use, remembering that the first number you set is determining how long the tub will heat for. The second number you set will determine the delay in the heater coming on. Our local spa store said to keep the circulation on (at least periodically) to ensure there is no overgrowth of anything nasty. Over all, this is a great solution if not looking for permanence!
I just bought a saluspa laguna. Control panel looks like yours. How do you cycle the system on and off? I don't want it heating and running all of the time. The directions are not clear on this.
I found it pretty easy to set up and the quality wasn't that bad. That being said, I would NOT recommend this unit for anywhere north of the sun belt unless you plan on only using it in summer. It is basic math. It's only a 110v heater, and it's got very basic insulation including an unimpressive non-fitting blow up cover. The blow up cover only covers about 75% of the tub. The exterior cover is good. But keep in mind it's waterproof, so if it rains, it will sag. So plan on emptying it after every use. I find it works ok in a northern zone if I fill it with hot water. It takes about 2 hours, and with a custom rigid foam cover, I can keep it warm even if it drops into the single digits. It will run your electric bill about $75-100/month. Folks (even down south) forget to mention that. One final comment, my pump failed after 3 months. It trips the built in GFCI and won't go on at all. So now I basically use it as a non-bubble hot tub. It is nice though to sit under the stars in winter, or even when it's snowing. I do keep the cover on, lol. It's the only way to keep yourself and the water warm.
How often do you change water? Do you leave the hot tub running at all times, even not in use? Should I turn it off if I only use in the weekends F-Sun? Thanks
The air pocket in the bottom is normal. The whole bottom has holes in it that the air pump pushes air through to get the even airflow up top. Those holes are the “air jets” they advertise.
We just bought one of these and set it up. But Did I do something wrong because the jets didn’t turned on and the directions we got weren’t directions at all just pictures.
I bought the foam filters off eBay, works wayyyy better FYI and way less expensive! We bought the same model in montana, a month ago! It’s been very cold lately, it’s gotten under 20 degrees here, and it never falls below 102 covered!
@@bigtim208 Using a Kill-A-Watt I tested with the heater (and filter) running an average of 1,300 watts so this is basically a hairdryer element to heat the water. Since I didn't get a chance to fill ours until 12/31 but was still warm for NJ (50 outside), I added a few harbor freight moving blankets on top of cover to help retain the heat (we placed ours in our garage as I don't know how it would handle any large snowfall). Thanks for taking one for team and documenting all of this making a great reference compared to that well documented instruction guide.
I keep getting EO2 and pump shuts off i drained tub and run hose thru pipes to clean out put back together and added water and it is worst then before i cleaned the lines. Wont stay running shuts down with EO2 comes up. What do i need to do next?
Does your outdoor plug receptacle have a GFI breaker? I've been told that this is essential to protect you from possible electrocution if something goes wrong.
Curious what type of electric plug it has, is it 110 3 prong or 2? And would like to see what you meant by installed the led lights and see them work. Thanks
@@bigtim208 well it says 1 left in stock and also saw they were 289 just a month ago, missed that window smh, I wouldn't have hesitated to purchase for that price. Oh well
I have the Miami and one thing I will say…after reading some of the reviews and seeing the videos, they said you can’t use the heater and bubbles together. This is false. I have a basic 110 or 120 outlet (USA) and I can run the heat, filter and bubbles with no problem. I think the outside lights and ceiling fans as well as some minor stuff like a light and electric chair and some chargers are plugged in and I haven’t had any circuit trips at all. In the directions it even says the heat and bubbles work together. So don’t be afraid to run the heat and bubbles together!
I have not had that issue with mine. I would try the basics. Unplug it for a few minutes and plug it back in. If that does not work, contact the manufacturer.
@@nosirrahm Do you know more about this? I have a Bahamas version and I believe it shut off after 2 days. Can't quite figure it out. It's a bummer since it takes so long to heat up.
Thank you! Your videos saved me so much time and effort. Just set mine up while watching your videos. Secret Xmas gift for my wife. Just hope she doesn’t go outside till Xmas. 😂
My electrician needs to bond the spa with a #8 bare copper wire, but he can not find anywhere to attach it. The manual states to connect it at the power box/terminal. He opened up the bottom of the unit believing there would be a lug to connect to, but none found. Where would the power box/terminal be?
My hot tub is flashing E02 . I have checked my water level it is good. My filter is clean. I put on stoppers and checked the connect hoses at filter sprayed out but seen no debrie. We have only used the hot tub a few times. We woke up the other morning with the E02 sensor flashing. I added water because it was a little low. Woke up the next day and it was flashing again. I have checked all things and still no water flow 😕 any advice would be helpful.
Ok so we are looking at getting this and the only spot I have to put it is on the back porch. We have outdoor animals we feed including 5 cats, a couple possums and raccoons lol. How is the thickness on this? Could they possibly pop it or is it thick enough it could hold up to some wildlife climbing on it? Because I'm sure they will be on it.
I had that error on Sunday, looked on UA-cam to determine what that code was (very happy that I just had to clean the filter) so I changed my filter, pushed the test button on the plug and the error cleared.
I didn't set mine up my ex did then we broke up. So I don't know what I'm doing. Idk where the filter is or where it goes. He bought bromine tablets... I hope those are ok.... Where do I buy the filters?
No once you remove the cover and turn on the bubbles the temperature will start to drop. I've been using mine since 2 days after Christmas but I can't wait until the Spring and Summer nights.
I just bought this one and am having trouble putting air in the bottom plug, I don’t understand why air isn’t going in or how much air should be in it. Also on the box and directions it lead me to believe that I could have it outside during winter since it says it’s winterized so I thought it would be safe outside even with snow on the ground like at your Hot Springs
There is only one plug that needs air on the hot tub. That is the side wall plug. The bottom plug in the tub is for draining it. The only other thing that needs to filled with air is the lid.
Yes it can be outside in the winter. Although I think it is going to increase my electricity bill. Lol... Right now it is costing me about $30.00 a month. I expect it to be $50.00 this month.
It can stay outside in the winter. As long as the heater is on, it wont allow it to get lower than 40 degrees and the water won't freeze. Mine sat out in the snow last week with no issues.
Does anyone have a digital copy of their manual they'd be willing to send me? We got ours from Costco - it was the last one on the floor and was returned by someone without the manual!! Been tricky setting it up without a manual so your video has been really helpful We don't know if we're supposed to turn the hot tub off in between the days we're not using it. We're definitely not going in every day and don't want to waste money heating it every day.
I've had mine set up since Christmas day and it's been running ever since. You can set the timer so it'll kmow when to start heating.... I haven't tried that feature yet since it takes time to get it to 104 so i just leave mine as is.
In 30-40 degree outdoor weather, is it supposed to always stay at 104 degrees if it’s set for that? Mine is at 91 degrees and it’s not raising now that it’s colder out
Thanks for the update, Tim. 👍 How often do you have to change the filter? I read on a different review that it is supposed to be changed weekly (?)~😬 Yeah, umm, that can get pricey~lol.
I wasn't going to say anything but now that you said it, it would make a heck of a drinking game every time he says magic of you tube, everybody take a drink. This is all in fun and not an act of meanness towards the UA-cam contributor. 🤗
I purchased this hot tub and had to return it because it was leaking air in the inflatable lid cover and the hot tub itself wouldn’t hold air. I was very disappointed.
Buy another one, that one just sounds defective. Mine has been up exactly 1 month and I've had no issues with leaking. We just had our 1st snow 2x this week, so I'm curious if I'll need to add more air once the weather gets above freezing.
@@danieleviola5696 I also read the instructions on the spa sanitizer and my PH down it says to add it directly to the tub with the jets on and not a bucket. So thanks for the information but I'm going to stick with the instructions and the recommendations of professionals. I think you should consider doing the same.
Thank for the videos! It really helped with setup and we are now waiting on it to heat up!
Did you like it?
How is your tub doing?
@@bigtim208 so far so good we took it down a week ago for the winter just to be safe but miss it already lol
Big help for knowing what chemicals and making sure I understood and was right about how to set the heat! Also A+ for showing me the blue piece was part of the cover on another video! We just filled ours and hope to try it tomorrow!
In order to keep it warm does it have to be ran all the time. Does it run up the electric bill a lot if so. I've had mine running for about a week and starting to think maybe it's not a good idea because it will be expensive. Is it better to shut off and only run it 24 hours before I want to use or
We have bubbles under our floor as well. I was hoping it wasn’t something I did wrong. Ho do I know if I have enough air in my hot tub?
Do you add the cleaning products before heating up hot tub or a little before your getting inside the hot tub?
My electric bill is quite a bit higher up here in North East winter. This is to be expected after all. It’s been quite cold 30’s, dipping to 20’s and at one spell in the 10’s. The tub did well. We keep ours on a three season porch with the tub cover on when it is not in use. I’m sure we over chlorinate. If you keep your temps high, you’ll need to add chlorine more often. We were told by our local spa company it should be a 1:2 ratio chlorine to shock. The timer is easy to use, remembering that the first number you set is determining how long the tub will heat for. The second number you set will determine the delay in the heater coming on. Our local spa store said to keep the circulation on (at least periodically) to ensure there is no overgrowth of anything nasty. Over all, this is a great solution if not looking for permanence!
Best way to keep heat with jets running ? I drop temp so fast
I just set mine up. well, my wife's graduation gift. Thank you so much for your efforts. Your videos are very helpful.
Informative video thanks.. do you think it can fit 4 adults comfortably?
I just bought a saluspa laguna. Control panel looks like yours. How do you cycle the system on and off? I don't want it heating and running all of the time. The directions are not clear on this.
My heat cycles on an off but i can't get the circulation to cycle on and off the circulation runs 24/7.
I found it pretty easy to set up and the quality wasn't that bad. That being said, I would NOT recommend this unit for anywhere north of the sun belt unless you plan on only using it in summer. It is basic math. It's only a 110v heater, and it's got very basic insulation including an unimpressive non-fitting blow up cover. The blow up cover only covers about 75% of the tub. The exterior cover is good. But keep in mind it's waterproof, so if it rains, it will sag. So plan on emptying it after every use. I find it works ok in a northern zone if I fill it with hot water. It takes about 2 hours, and with a custom rigid foam cover, I can keep it warm even if it drops into the single digits. It will run your electric bill about $75-100/month. Folks (even down south) forget to mention that. One final comment, my pump failed after 3 months. It trips the built in GFCI and won't go on at all. So now I basically use it as a non-bubble hot tub. It is nice though to sit under the stars in winter, or even when it's snowing. I do keep the cover on, lol. It's the only way to keep yourself and the water warm.
How often do you change water? Do you leave the hot tub running at all times, even not in use? Should I turn it off if I only use in the weekends F-Sun? Thanks
The air pocket in the bottom is normal. The whole bottom has holes in it that the air pump pushes air through to get the even airflow up top. Those holes are the “air jets” they advertise.
My temp won’t go past 84 degrees. Changed the filter. Took off filter. Anything else I can try before buy another pump
What is the plastic piece above the water inlet?
I just bought one of these hot tubs. Do you run the filter all the time?
Blower works only for two minutes and shuts off for the bubbles. Cannot turn it back on but hear a small click noise when I try. Any suggestions?
I have a brand new one, with airpockets. dont know either if its normal.
We just bought one of these and set it up. But Did I do something wrong because the jets didn’t turned on and the directions we got weren’t directions at all just pictures.
🤷♂️
What is the length of the power cord?
Hi. Do you have a video of the setup?
I bought the foam filters off eBay, works wayyyy better FYI and way less expensive! We bought the same model in montana, a month ago! It’s been very cold lately, it’s gotten under 20 degrees here, and it never falls below 102 covered!
Have you noticed a change in your electric bill? How much?
About $30.00 a month.
I know this tub rocks!
Link to filters?
@@bigtim208 Using a Kill-A-Watt I tested with the heater (and filter) running an average of 1,300 watts so this is basically a hairdryer element to heat the water. Since I didn't get a chance to fill ours until 12/31 but was still warm for NJ (50 outside), I added a few harbor freight moving blankets on top of cover to help retain the heat (we placed ours in our garage as I don't know how it would handle any large snowfall). Thanks for taking one for team and documenting all of this making a great reference compared to that well documented instruction guide.
Thank you for all the information I need it I will be ordering my hot tub next week from wayfair god bless you always
You as well.
I keep getting EO2 and pump shuts off i drained tub and run hose thru pipes to clean out put back together and added water and it is worst then before i cleaned the lines. Wont stay running shuts down with EO2 comes up. What do i need to do next?
Try running bubbles only without heater for 5 or so minutes then try to run everything normally again
The size of the filter is V1 not 4 (not roman numerals) just like the ones you bought are S1 and Yes S1 / V1 are interchangeable.
Thanks for the information. When I do a other video I'll be sure to include that.
The size of the filter is 6 - VI. :)
Hello thanks for the videos, I am planning on purchasing this. Does it run your electric bill up? 🤔 My kids are excited to try?
Yes
Does your outdoor plug receptacle have a GFI breaker? I've been told that this is essential to protect you from possible electrocution if something goes wrong.
Yes it does. I have one n love it..
So your using an S1 in place of the VI for the filter? Interesting.
Yep
Great video. What part of the US do you live in? Curious on how your spa is doing through the winter months?
Curious what type of electric plug it has, is it 110 3 prong or 2? And would like to see what you meant by installed the led lights and see them work. Thanks
Check out my other videos for the led lights. It is a 110v 3 prong plug in. Also it is sold out everywhere.
@@bigtim208 walmart has 1 for 399, im arguing with myself on whether or not to hit the checkout button lol
@@bentramell729 Oh wow! They have been sold out for a few days now. Good to know they are back.
@@bigtim208 well it says 1 left in stock and also saw they were 289 just a month ago, missed that window smh, I wouldn't have hesitated to purchase for that price. Oh well
@@bentramell729 Wish I could have got it for that. Even at $399 I feel like it was a great purchase.
On first heat up, when it's full, you can dip out a pot of water and boil one pot every hour to speed up the heat up.
Sounds like helpful information. Thanks for the comment.
Or hook a hose pipe up to your tankless water heater when you fill it! 😎
Trying to inflat it at set up. Set up in the right spot for pump and connected to air spot. throws eo2 constantly. Won't air up.
I put the bromine in and ran the bubbles and it’s making A LOT of bubbles.. is that normal?
I have the Miami and one thing I will say…after reading some of the reviews and seeing the videos, they said you can’t use the heater and bubbles together. This is false. I have a basic 110 or 120 outlet (USA) and I can run the heat, filter and bubbles with no problem. I think the outside lights and ceiling fans as well as some minor stuff like a light and electric chair and some chargers are plugged in and I haven’t had any circuit trips at all. In the directions it even says the heat and bubbles work together. So don’t be afraid to run the heat and bubbles together!
Can confirm. I do it all the time.
Hey buddy I got a coleman saluspa bahamas inflatable and stop heating up what's wrong can you idea thanks
I have not had that issue with mine. I would try the basics. Unplug it for a few minutes and plug it back in. If that does not work, contact the manufacturer.
Oh god i have the same spa same table set
how long should i wait for the hot tub to heat up?
2 degrees an hour or so.
Have you or do you use the power saving timer. ?
Nope. I just keep it on all the time.
Depending on the one purchased, they do have timers.
@@bigtim208 Do you keep your circulation pump only running 24/7 or the heater too at the same time?
@@nosirrahm Do you know more about this? I have a Bahamas version and I believe it shut off after 2 days. Can't quite figure it out. It's a bummer since it takes so long to heat up.
Thank you! Your videos saved me so much time and effort. Just set mine up while watching your videos. Secret Xmas gift for my wife. Just hope she doesn’t go outside till Xmas. 😂
Thank you for the feedback. Helping people is why I do this.
My electrician needs to bond the spa with a #8 bare copper wire, but he can not find anywhere to attach it. The manual states to connect it at the power box/terminal. He opened up the bottom of the unit believing there would be a lug to connect to, but none found. Where would the power box/terminal be?
Don't need to it has a built in gfi plug
My unit will not unlock.
Had a e02 error n changed filter n it now won't unlock to turn it on.
Why?
My hot tub is flashing E02 . I have checked my water level it is good. My filter is clean. I put on stoppers and checked the connect hoses at filter sprayed out but seen no debrie. We have only used the hot tub a few times. We woke up the other morning with the E02 sensor flashing. I added water because it was a little low. Woke up the next day and it was flashing again. I have checked all things and still no water flow 😕 any advice would be helpful.
I believe it can be low temperature. I’m having the same thing😣
How much of a headache is it to drain? We are putting hours on our screened-in back porch so this information would be highly useful as to placement.
I have not drained it yet. Next month is going to be my first time.
Okay this is a birthday surprise for my husband and I'm trying to think when I set it up where can it stay without having to move it LOL
@@uhohmomo7685 lol
I bought a submersible pump to drain mine. Easy as hell with a garden hose.
hi. is it true that you cannot run jet and heater at the same time with 120v? so you have to chose to heat it or have jet going? Thanks
You can run both with the tub.
I prefer Bromine, doesn't smell and softer on skin.
Thank you for the videos it has really helped. Can you post the link to the filters please?
www.amazon.com › POOLP...
Web results
Amazon.com : POOLPURE 6 Pack Type S1 Replacement PureSpa ...
Ok so we are looking at getting this and the only spot I have to put it is on the back porch. We have outdoor animals we feed including 5 cats, a couple possums and raccoons lol. How is the thickness on this? Could they possibly pop it or is it thick enough it could hold up to some wildlife climbing on it? Because I'm sure they will be on it.
My cats and dogs do not disturb it in any way. Once in a while I find my cat sleeping on too of it to stay warm. It is thick but it can be punctured.
The magic of UA-cam.
It is magical!
How will I know when to stop inflating the tub?
The pump will stop when its full.
I hope you got a new subscriber every time you said magic of youtube, if you did you're all set!
If it were only that easy! Lol
Mine won't unlock. What do I do?
What about error 02 new filter clean out hot tub by putting new water in. No kinked hose no debris. Still getting error 02
I had that error on Sunday, looked on UA-cam to determine what that code was (very happy that I just had to clean the filter) so I changed my filter, pushed the test button on the plug and the error cleared.
I thought the bottom seat also inflated some, but mine appears flat? Is this correct?
It is padded but not inflatable. Not sure why some many people think the bottom is inflatable?
You are correct. I thought so too... but it doesn't but its sort of padded so it's comfortable to sit in
Thanks for the videos. My SaluSpa arrives on Friday.
You're welcome. Have you set it up yet?
@@bigtim208 it’s been up for a few weeks ago. Have you had any issues with the LED lights? Mine will work half the time.
@@bryan2088 No issues here.
@@bryan2088 mine has been up since Christmas night and luckily no issues with the lights
Thank you.
Thanks for the comment!
I didn't set mine up my ex did then we broke up. So I don't know what I'm doing. Idk where the filter is or where it goes. He bought bromine tablets... I hope those are ok.... Where do I buy the filters?
Also are we supposed to be checking the levels?
Check out my other videos. I got over all of it.
Is it safe to let the hot tub heat up overnight and with the lid on it?
Mine has been on for 3 months now.
Yes, that's how you should heat it to get it to your desired temperature. My lid and heat are always on.
@@msways5242 I've only had mine for few days. Randomly shut off one morning. Have you had that issue? Can you keep it on and heat 24/7?
@@bigtim208 I've only had mine for few days. Randomly shut off one morning. Have you had that issue? Can you keep it on and heat 24/7?
Need help. Need to get the water out of the rim part that blow up.the is so much water in the rim I can't lift it 😫
What size tote do I need to store all this in?
30 gallon
How long did it take to heat up
2 degrees an hour.
where do you buy the filters for this hottub
What happens when the heater element goes?
it happened to someone that does not heat?
did we set up something wrong if the temperature drops when you turn on the bubbles?
Nope. Ours also drops when the bubbles are on. I lose about 2 degrees for every 20 to 30 minutes it is on.
No once you remove the cover and turn on the bubbles the temperature will start to drop. I've been using mine since 2 days after Christmas but I can't wait until the Spring and Summer nights.
I set mine up in my basement. More private and convenient then outside lol
My question is that it says the light above will turn green when done mine has been heating wich light turns green?
I believe it is an energy saving mode it goes into when it is at 104 degrees.
When the desired temperature is reached the green might comes on.
Have you ever had the heater just not work? Everything is new, just won't produce hot water.
That has not been an issue for me. It takes 12 to 24 hours for the tub to reach 104 degrees for me.
Dude! Greatly appreciate the knowledge.
You're welcome.
I just bought this one and am having trouble putting air in the bottom plug, I don’t understand why air isn’t going in or how much air should be in it.
Also on the box and directions it lead me to believe that I could have it outside during winter since it says it’s winterized so I thought it would be safe outside even with snow on the ground like at your Hot Springs
The bottom plug?
There is only one plug that needs air on the hot tub. That is the side wall plug. The bottom plug in the tub is for draining it. The only other thing that needs to filled with air is the lid.
Yes it can be outside in the winter. Although I think it is going to increase my electricity bill. Lol... Right now it is costing me about $30.00 a month. I expect it to be $50.00 this month.
It can stay outside in the winter. As long as the heater is on, it wont allow it to get lower than 40 degrees and the water won't freeze. Mine sat out in the snow last week with no issues.
Do you put air in the bottom of the spa? It looks like it's hard to sit on.
No air goes in the bottom of the tub. It is however padded and very comfortable.
Whats the valve or drain for in the bottom?
@@matthewgautierIt is a drain.
no air in the bottom, but it's not hard to sit in.
I was worried about that too. It's actually nice
What is the oval piece at the top right at the water line? Above the bromine holder?
I think it is the temperature 🌡 🤔
@@bigtim208 I thought so too but it would be reading the air temp more than water temp. I am pretty sure it reads the temp inside the pump.
@@2005acmk 🤷♂️
@@bigtim208 lol. Me too.
Water is high. Enough filter is new. Every time we turn on the heater it kicks off and reads a e02
If unplugging it for 5 minutes does not work, you may need to reach out to the manufacturer.
What is the piece all the at the top above the filter is that another filter?
That is where you would add the container for the chemicals. We choose not to use it.
How long it take to heat up?
It depends on your water temperature. It can take a few days.
24 hours to 104 from first water set up
Every time I push the heater button it keeps kicking off. Water is good. Filter is new.
The one and only time this happened to me. I unplugged the tub for 5 minutes and plugged it back in. After that, it worked fine.
Is there a reset button on the tank?
No.
You have that plugged into an outlet right next to the hot tub. Playing with lightning there.
That video was taken over a yeah and a half ago. It has been moved since.
Just curious- is this hot tub pump still working for you while running the filter/heat function everyday? Thank you!
@TC yes. I only run the hottub every two days, really no need to run it daily if the chemicals are correct. Heat and pump all work properly.
Does anyone have a digital copy of their manual they'd be willing to send me? We got ours from Costco - it was the last one on the floor and was returned by someone without the manual!! Been tricky setting it up without a manual so your video has been really helpful We don't know if we're supposed to turn the hot tub off in between the days we're not using it. We're definitely not going in every day and don't want to waste money heating it every day.
I've had mine set up since Christmas day and it's been running ever since. You can set the timer so it'll kmow when to start heating.... I haven't tried that feature yet since it takes time to get it to 104 so i just leave mine as is.
@@msways5242 I do the same thing leave it at 104.
Here's the manual: p360.bestwaycorp.com/Manual/98611ADF-B525-4056-A65B-DACD337F43FF.pdf
How do you heat the spa tub
Push the lock button and change the temperature to what you want it to be. Make sure the button that looks like fire is lit.
@@bigtim208 I am going to admit that I have been sitting here twiddling my thumbs wondering why this thing wasn't heating. You are awesome.
In 30-40 degree outdoor weather, is it supposed to always stay at 104 degrees if it’s set for that? Mine is at 91 degrees and it’s not raising now that it’s colder out
Thanks for the update, Tim. 👍 How often do you have to change the filter? I read on a different review that it is supposed to be changed weekly (?)~😬 Yeah, umm, that can get pricey~lol.
It depends on how often you use it. Could be weekly if it is used every day.
@@bigtim208 Oh my! 💰 Thank you, Tim.
Where did you get your filter??
I saw that you rinse daily? And can replace monthly depending on usage. So much different t info out there.
Mine has been hearing for 2 hrs and it hasn't budged.... Jets work.... Nothing feels warm what so ever on any on the inlets
Heating*
It can take 24 or more hours for it to heat up. It only heats up 2 degrees or so an hour.
@@bigtim208 I just figured I'd see it go up at least a few degrees. Hoping to be able to use it tomorrow 🤞
Awesome video 👍 thanks brotha #FLINKO
Thank you.
"Magic of UA-cam"
Dude... I had to stop the video.. the magic of UA-cam phrase was toooooo frequent lol
It is magical!
I wasn't going to say anything but now that you said it, it would make a heck of a drinking game every time he says magic of you tube, everybody take a drink. This is all in fun and not an act of meanness towards the UA-cam contributor. 🤗
Wat was the snswer
I purchased this hot tub and had to return it because it was leaking air in the inflatable lid cover and the hot tub itself wouldn’t hold air. I was very disappointed.
Have not had an issue. Did you try another one?
Buy another one, that one just sounds defective. Mine has been up exactly 1 month and I've had no issues with leaking. We just had our 1st snow 2x this week, so I'm curious if I'll need to add more air once the weather gets above freezing.
When do you put the other chemicals in and how much
You need to talk with your local spa store about the Chemicals you need and how much. They can test your water for free.
please add a link for the filters you purchased
Amazon.com
POOLPURE 6 Pack Type S1 Replacement PureSpa Filter for Easy Set Pool Cartridges, 11692 Spa Filter







Just throw it in the dishwasher. What I do.
Never trow your products straight in the tub or pool. Always mix them in a bucket . First water,than the product,not the other way.
I follow the instructions given to me by my local spa store.
@@bigtim208 well someone is not doing his job right.
@@danieleviola5696 I also read the instructions on the spa sanitizer and my PH down it says to add it directly to the tub with the jets on and not a bucket. So thanks for the information but I'm going to stick with the instructions and the recommendations of professionals. I think you should consider doing the same.
need help to deflate please
I have not had to deflate mine but you should have a black attachment to help with deflation.
#thruthemagicofyoutube
VI is 6 not 4. If it was 4 it would be IV
👍 just buy S1 filters and you're good.
Once the Calista has reached 104 do I need to do anything