This will not work with any Dodge Grand Caravan that was done after 2010. This was possible before 2010 Dodge. Starting from 2010 Dodge is unfortunately not allowing to copy key fob yourself. But anyway - good job with this movie. It shows the whole process very good.
Thanks for the comment, i believe this process can be done with 2 electronic keys for newer models like commented by other people for whom it worked watching this video. are you trying to program with 1 manual key and 1 electronic keyfob?
In case anyone else has the same issue - (for my Dodge Grand Caravan 2019) I only received one fob from the dealer with the physical key inside and when inserted, the physical key showed on the screen as "damaged" so this method didn't work for me, I'm assuming because I only had one "key" at that point - because the fob did work. Anyway, I had to purchase the OBD device off amazon and use the app - I used the i Car Pro and had to purchase the VIN license for the vehicle (20.99) and it worked for both new fobs from Amazon I was trying to program. Super easy.
The reason the remote start would not work is because you have to have the van locked before remote start will work so if you got out of the van or sat in the van and locked it and set the alarm waited a few seconds, then started it with the remote, it should start if it has remote start
Well, I’ve tried a couple times with new key fobs and it does not work for a 2010 Town & Country the only time I get the red flashing light in the center is if I try to put in one of the key fobs that has not been programmed and turned to Keyon I cannot get the programming light or the flashing red light in the center to come on you using the two factory key fobs just put it out there
@@rodneyfodor1899 thanks for confirming. In this case can you check about the key fob you have? Do both of them work to start the car? Look out for that ping sound like given in the video for original key/manual key
@@puttasampath Yes, both of my Fobs start Van. Pings, remove fob, insert other fob, pings, remove insert new fob, pings, red 🔴 on screen flashing. Fob doesn’t program, nothing on new fob works. Saw video that you need security code for vehicle that you can get from dealer with vin #, but a machine is needed to program fob.
@@rodneyfodor1899 they key is to wait for few seconds once it shows the red icon to move the car to programming mode. Can you try waiting for few more seconds each time with your original keys? Just like how to shared in the video?
I am trying to program a 2016 dodge caravan key fob remote, does your method require that the key have a chip in it? Or does it matter the key I have to use is not chipped
not required to have chip on the key. do you have original remote that isn't working anymore? its better to have atleast one remote even if that doesnt work.
What the difference between this method and purchasing the simply key programming module which connects into the obd. I have recently purchased a Grand Voyager 2008 model with only one key.
Managed to get my EZ key from amazon and programmed it into the vehicle. I only had the 1 key when I purchased it but now have 2 working keys so either way I am able to program an additional 3 rd or 4th key using this method or with the EZ tool!!
I have two old fobs that start the van, but I cannot get the program light to work It will come on when I put the new fobs in but not able to program them And I followed your instructions exactly
Is this programming feature available in all trims?? For example I have a 2014 Grand Caravan SXT. If I purchase these keys I should be able to program them as you did?
I am not sure but it should be similar , do a quick check of whether the car is beeping (indication of programming mode that I had shown in the video?)
My wife just bought a 2013 caravan and it only came with a key and no fobs. If i order two key fobs can i program them with only the key, or do you need an original fob to do it?
In my opinion, you must have atleast one keyfob to make duplicate keyfobs. With that being said, you can give it a try with the manual key that you have: See if you hear that beep sound(car going in to programming mode) like shown in the video, if it does, then you should be able to.
If I have lost 1 remote. Can I do this procedure using only the second remote (the FOB + the physical key inside the remote)? Would the FOB and the physical key inside count as 2 disctint keys? (Dodge Grand Caravan 2020)
Hello, Thank you for commenting. It is a really good question that many people ask me. Here's my thought about it: If you are able to start the car with the manual key thats inside the fob, then certainly you can follow the procedure given in the video to replicate another new Keyfob (electronic key). Please do try and let me know how it goes! Have a good day.
@@uccoskun IT does run bro with the keyfob type manual key. i was using the Manual keyfob only before and later i programmed a key using the Keyfob programmer and in this video i showed how to program another keyfob without a programmer.
Hello. My keyfob will start the car, but the doors can not be locked or unlocked with it. It will not work the buttons. I already changed battery and cleaned buttons and still nothing works. Is the keyfob broken or just not programmed? I only have one.
thank you for your video nice and simple explaning, i have 3 key fobs all three start the car but only one will open the doors etc the other 2 do not, the key if inserted does nothing wont the car ignition to any positiion its like its too loose its the black key, so what do you suggest ?
Hi, sorry for the late reply, I suggest you buy dummy keys off of Amazon and program the way I had shown you in the video. That way, you can use just new keys and still be able to lock, unlock and start the car.
Will this work on 2012 Dodge Grand Caravan?..I have one key that only locks. The rest no longer have remote ability (i have put new batteries) but do start the van.
I have a 2015 Dodge Grand Caravan, with two fobs, I can't program the third new key after I followed all those steps. Not sure is that related to an engine warning I had.
did you ordered the new dummy keys from amazon from the link i had given in the description? did you wait for the beep after moving the car to programming mode?
may i know if you have ordered the programmable ones from Amazon ? i gave the link in the description of the video, please see the compatibility before you buy it..@@rodneyfodor1899
Do you need 2 original key fobs? Why can't you use the same key fob twice instead of 2 separate key fobs? I mean turn the original key fob to the on position for a few seconds take it out then put it back in and turn to the on position again. Wouldn't that do the same thing?
I have a 2019 Dodge Caravan. The first key that you put in my ignition won't even turn once it's in, so I can't proceed any further. This method didn't work for me.
So you don't have another electronic fob? why aren't you able to turn on the Ignition with manual key? doesn't it go all the way in to be able to turn?
@puttasampath so yes...to answer your question, I have my original key fob. I even tried taking the silver key out of the key fob, stuck it in the ignition, and it wouldn't turn over.
@@KeithStinerTunes may be the key is not the right one then? i don't understand why the keyfob that came with the car which has a manual key wouldn't be able to turn the ignition. I would assume that would be the case if the Key is too short and it is just enough to open the driver door from outside.
Hi, yes I think it’s possible to program another key with just 1 key fob. try following same process as I gave in the video and let me know. Alternative would be to get a fob programmer from Amazon.
@@feyrrari no, you need atleast one original remote to be able to pair another one. If you don’t have any remotes, you need to program the key with a key programmer from Amazon.
If I had two working keys, I wouldnt need anymore. I lost the only key fob I had, so I ordered one. It was blank, and was told I had to get a locksmith to cut it and program it. $225. Other than making a 1000% profit I dont see a reason to charge so much. The computer they have to buy is a portion of the reason. It cost $1600, but at $200 a key, after 8 keys is putting it in deep. Anyone know a cheaper way on a 2005 grand caravan?
@@eee19618you mean when you turn on the car? Does the audio system work on your car ? May be an issue with your cars speaker system. Check atleast the red light 💡 that glows at the same time as it sounds.
@@puttasampath No issues, I followed all of the steps, not difficult. But the new fob does not work. Your dash is different but here is what I can tell you. A programmed key when turn to the on position, will have a solid red dot. A non-programmed key will have a blinking dot, at least on my Caravan which is a 2010.
@@puttasampath No, the two programmed keys go in fine and the red dot is solid. I followed the steps numerous times, using different time frames, 10 seconds,12, 15 in the on position then whenever I put in the new fob, the red dot blinks, I put in the on position for 10-15 seconds, still blinks. I remove new key and it does not work.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Very helpful. And mercifully short.
Thank you for respecting the viewer's time!!
Glad it was helpful! Thanks a lot for commenting :)
This will not work with any Dodge Grand Caravan that was done after 2010. This was possible before 2010 Dodge. Starting from 2010 Dodge is unfortunately not allowing to copy key fob yourself. But anyway - good job with this movie. It shows the whole process very good.
Thanks for the comment, i believe this process can be done with 2 electronic keys for newer models like commented by other people for whom it worked watching this video. are you trying to program with 1 manual key and 1 electronic keyfob?
It’s wonderful that corporations are upping their greed by holding us down and sucking all of our hard-earned money.
So you’re saying you can’t do it with a 2010 Town & Country just curious thank you sir
Because the dipshit headquarters want more money
In case anyone else has the same issue - (for my Dodge Grand Caravan 2019) I only received one fob from the dealer with the physical key inside and when inserted, the physical key showed on the screen as "damaged" so this method didn't work for me, I'm assuming because I only had one "key" at that point - because the fob did work. Anyway, I had to purchase the OBD device off amazon and use the app - I used the i Car Pro and had to purchase the VIN license for the vehicle (20.99) and it worked for both new fobs from Amazon I was trying to program. Super easy.
So it worked even though it was “damaged”?
Scammer!!!!!
@@kacymoreno7259 you are a scammer!!!!
Thanks for sharing an alternative video that helped you aswell.
I have a 2019 as well can you send me the link or attach the link of the Amazon purchase
The reason the remote start would not work is because you have to have the van locked before remote start will work so if you got out of the van or sat in the van and locked it and set the alarm waited a few seconds, then started it with the remote, it should start if it has remote start
Well, I’ve tried a couple times with new key fobs and it does not work for a 2010 Town & Country the only time I get the red flashing light in the center is if I try to put in one of the key fobs that has not been programmed and turned to Keyon I cannot get the programming light or the flashing red light in the center to come on you using the two factory key fobs just put it out there
Try with one manual key like shown in the video?
Bought same programmable keys from Amazon, I have 2 original Fobs. Followed video, Inserted new Fob, doesn’t program, button just flashes red?
may i know if you bought the compatible key from amazon? what is your car's year make and model?
@@puttasampath Same Fob from Amazon, used your link. 2010 Dodge Grand Caravan SXT.
@@rodneyfodor1899 thanks for confirming. In this case can you check about the key fob you have? Do both of them work to start the car? Look out for that ping sound like given in the video for original key/manual key
@@puttasampath Yes, both of my Fobs start Van. Pings, remove fob, insert other fob, pings, remove insert new fob, pings, red 🔴 on screen flashing. Fob doesn’t program, nothing on new fob works. Saw video that you need security code for vehicle that you can get from dealer with vin #, but a machine is needed to program fob.
@@rodneyfodor1899 they key is to wait for few seconds once it shows the red icon to move the car to programming mode. Can you try waiting for few more seconds each time with your original keys? Just like how to shared in the video?
Super helpful thank you
You are very welcome :)
I am trying to program a 2016 dodge caravan key fob remote, does your method require that the key have a chip in it? Or does it matter the key I have to use is not chipped
not required to have chip on the key. do you have original remote that isn't working anymore? its better to have atleast one remote even if that doesnt work.
What do you do with the non working fob? @@puttasampath
Hi , with the non working keyfob, are you able to put the car in programming mode like shown In the video?
How do you do it if you only have one key
Program a dummy key like given in video?
What the difference between this method and purchasing the simply key programming module which connects into the obd. I have recently purchased a Grand Voyager 2008 model with only one key.
with the programming module you can program the new keyfob without the need of duplicate keys.
Managed to get my EZ key from amazon and programmed it into the vehicle. I only had the 1 key when I purchased it but now have 2 working keys so either way I am able to program an additional 3 rd or 4th key using this method or with the EZ tool!!
I have two old fobs that start the van, but I cannot get the program light to work
It will come on when I put the new fobs in but not able to program them
And I followed your instructions exactly
thanks for commenting, is your car the exact same year?
Hi Sampath, can it be done if you have only one fob? it seems I can not program the new fob. I have only one original key fob.
You may try one manual key and one original keyfob to program duplicates like shown in the video.
Is this programming feature available in all trims?? For example I have a 2014 Grand Caravan SXT. If I purchase these keys I should be able to program them as you did?
I am not sure but it should be similar , do a quick check of whether the car is beeping (indication of programming mode that I had shown in the video?)
I have a 2010 sxt and cannot get it into programming mode with this technique
sorry about that. i hope you find an alternative through internet search.@@eric.willman
My wife just bought a 2013 caravan and it only came with a key and no fobs. If i order two key fobs can i program them with only the key, or do you need an original fob to do it?
In my opinion, you must have atleast one keyfob to make duplicate keyfobs. With that being said, you can give it a try with the manual key that you have: See if you hear that beep sound(car going in to programming mode) like shown in the video, if it does, then you should be able to.
How do you program a new fob if you do not have the original and only have and actual key, no push button fob?
you can use the keyfob programmer available in Amazon. its easy step by step.
www.amazon.com/BestKeys-Programmer-Compatible-Transimitter-4-Button/dp/B0DDSN7GBZ/ref=sr_1_1_sspa?dib=eyJ2IjoiMSJ9.cEV3LmGFU-14nUiFOlOMXRYp-vXf2cgZbXqMv5Ytt_yz3JV2N5kwu-DC599ZpiGU1Lk6m0gQ90Xb1-GC3dydmfrtf5m1p8K8dLD7HnqvwlmPr4ibbHFSZReI8MdPS06X4qzRKYIFtDXfLO1Pm6Ozu9FKcSf4zfeE9uW10ZGQkR86Gan9fR_SJFMN8unIpO4h4Ubgu8Z2NAG7HNTZwLFL4zJ9YXEIqofM8PEAH9zqpKNd1EeKQTvQSVrxqCyyJ7qgy-9qwb6V13Z1_ONbHddGgMcHGS4V6I1UPP0_gK-pvDA.ykN7X6AdZZ_Nbt9NcqEemiUJ0XsCdFlqrHMvi-VmpxE&dib_tag=se&hvadid=670251597328&hvdev=c&hvlocphy=9032051&hvnetw=g&hvqmt=b&hvrand=11768123090853867704&hvtargid=kwd-394845021585&hydadcr=25122_13572271&keywords=key+fob+programmer+for&qid=1729997855&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
2010 caravan sxt does not flash for programming mode after second key, still treats the new/third one as badkey
Damn, then could you check the owners manual on how to move it to programming mode? probably its slightly different for your car?
Same problem me as wel I have 2010 dodge caravan after 2nd original key on the on position, not pop up program blink light?
Can I use the one fob key twice to program a new one? The second key was stolen
you may try. I haven't tried it. possibly use one manual key and one remote like shown in this video.
Una pregunta tengo que programar las 2 llaves del nuevo control? O simple mente el control
No entiendo tu pregunta
This would not work for my 2013 Town & Country. It never went into programming mode. Brought the new fobs to a parkin$95. Still a great deal.
did you get the new keys programmed at the dealer or did you do it yourself with the programmer available on Amazon?
@@puttasampath Local locksmith.
One manual key only. no remotes, will this still work?
its best to have atleast one remote.
Will this work for a 2012 Dodge Caravan?
yes it should work. but please make sure you are ordering a programmable remote keyfobs suitable to your car.
If I have lost 1 remote. Can I do this procedure using only the second remote (the FOB + the physical key inside the remote)? Would the FOB and the physical key inside count as 2 disctint keys? (Dodge Grand Caravan 2020)
Hello, Thank you for commenting. It is a really good question that many people ask me. Here's my thought about it: If you are able to start the car with the manual key thats inside the fob, then certainly you can follow the procedure given in the video to replicate another new Keyfob (electronic key). Please do try and let me know how it goes! Have a good day.
@@puttasampath I donot think the key inside the key fob is good for this. It does not run the car...
@@uccoskun IT does run bro with the keyfob type manual key. i was using the Manual keyfob only before and later i programmed a key using the Keyfob programmer and in this video i showed how to program another keyfob without a programmer.
Hi ,,what's the problem, I don't can more locking the van with control
Could be the remote buttons inside have gone bad. Open the key fob and you can check
Hello. My keyfob will start the car, but the doors can not be locked or unlocked with it. It will not work the buttons. I already changed battery and cleaned buttons and still nothing works. Is the keyfob broken or just not programmed? I only have one.
I got same issue
its the keyfob damaged. i had same problem. hence did i program a new key.
yea try the solution that i have suggested :)
thank you for your video nice and simple explaning, i have 3 key fobs all three start the car but only one will open the doors etc the other 2 do not, the key if inserted does nothing wont the car ignition to any positiion its like its too loose its the black key, so what do you suggest ?
Hi, sorry for the late reply, I suggest you buy dummy keys off of Amazon and program the way I had shown you in the video. That way, you can use just new keys and still be able to lock, unlock and start the car.
@@puttasampath thanks ! I have already ordered the keys and will follow your instructions when i get them, appreciated
@@redeemed316-p5t You are very welcome.
Can you please share Amazon link for me? Thanks so much
It's in the description box.
Its in the description of the video :)
Will this work on 2012 Dodge Grand Caravan?..I have one key that only locks. The rest no longer have remote ability (i have put new batteries) but do start the van.
Yes I think it should work. Please try and let me know. Alternative would be to program via the RKE programmer from amazon
If you have a check engine light on the remote start won't work fyi
Where is the link to the key fob on Amazon
Updated in description.
would the old key fob still work?
Yes 👍 it is independent of old ones working or not.
I have a 2015 Dodge Grand Caravan, with two fobs, I can't program the third new key after I followed all those steps. Not sure is that related to an engine warning I had.
did you ordered the new dummy keys from amazon from the link i had given in the description? did you wait for the beep after moving the car to programming mode?
Can you do this with a fob from another dodge caravan or does it have to be a new fob only
you can re-program any key, but its a must to have 2 keys( like shown in video).
I have two keys and it doesn't seem to work, is there anything else to do. The programming light just keeps flashing when I put the new light in
did you mean you have 2 original keyfobs and you are not able to program the new ones?
@@puttasampath I have same issue. Have 2 working keys. New one keeps flashing red. Any luck on a remedy?
may i know if you have ordered the programmable ones from Amazon ? i gave the link in the description of the video, please see the compatibility before you buy it..@@rodneyfodor1899
Do you need 2 original key fobs? Why can't you use the same key fob twice instead of 2 separate key fobs? I mean turn the original key fob to the on position for a few seconds take it out then put it back in and turn to the on position again. Wouldn't that do the same thing?
The keys have different ID numbers, when you do this, you need two "Authorized" keys in order to program/add a additional key.
Not necessary. i have shown in this video that you can do programming of a new key if you just have 1 Manual Key and 1 Keyfob.
I tried on my 2013 Grand Caravan but it didn't enter the programming mode. The dashboard shows only the engine light.
Have you tried the steps given in the description of the video? There’s a way to program it via the car connector.
I lost my one and only key to the van. How would that work?
Does that mean you have no keys or remotes? If so, you may try the fob programmer on Amazon or delaer
si solo tengo una llave de repuesto y no dos? como puedo programar la nueva llave?
Hola amigo, use la programmer de Amazon. Link en description.
Gracias por comentar 🙏
Great Thank You!!
You're welcome!
Does it work in Grand Caravan 2014?
It should be similar try it. Most dodges have same
How much was the key??
you mean the programmable remote from amazon?
I have a 2019 Dodge Caravan. The first key that you put in my ignition won't even turn once it's in, so I can't proceed any further. This method didn't work for me.
So you don't have another electronic fob? why aren't you able to turn on the Ignition with manual key? doesn't it go all the way in to be able to turn?
@puttasampath I have one original key fob from when I bought my vehicle. I ordered 2 key fobs off of Amazon and they both have to be programmed.
@puttasampath so yes...to answer your question, I have my original key fob. I even tried taking the silver key out of the key fob, stuck it in the ignition, and it wouldn't turn over.
@@puttasampath it goes all the way in but won't turn
@@KeithStinerTunes may be the key is not the right one then? i don't understand why the keyfob that came with the car which has a manual key wouldn't be able to turn the ignition. I would assume that would be the case if the Key is too short and it is just enough to open the driver door from outside.
This doesn’t work for my dad’s 2010 van (same model as the vid). The light shows up but it never ever stops blinking. And it didn’t start the car.
are you trying the one with just 1 key? or 1 manual key wiht 1 keyfob?
What if you only have 1 key fob (no key or any other key fob) just a single fob is there a way to get it program still?
Hi, yes I think it’s possible to program another key with just 1 key fob. try following same process as I gave in the video and let me know. Alternative would be to get a fob programmer from Amazon.
I have no key can I program a amazon key with this tool?
@@feyrrari no, you need atleast one original remote to be able to pair another one. If you don’t have any remotes, you need to program the key with a key programmer from Amazon.
@sampath ramkumar thank you. Which programmer would you use? I don't know too much about them.
@@feyrrari here’s what I would suggest : Simple Key Programmer & Key Fob for Select Chrysler, Dodge, Jeep, Ram, Volkswagen Vehicles (interchangeable 5 & 7 button keypads) a.co/d/gNMjZ1r
If I had two working keys, I wouldnt need anymore. I lost the only key fob I had, so I ordered one. It was blank, and was told I had to get a locksmith to cut it and program it. $225. Other than making a 1000% profit I dont see a reason to charge so much. The computer they have to buy is a portion of the reason. It cost $1600, but at $200 a key, after 8 keys is putting it in deep.
Anyone know a cheaper way on a 2005 grand caravan?
certainly. try the programmer for $85 on Amazon. you can create a Keyfob. sorry for the late reply.
it doesn’t beep at all
which car model do you have? does it not beep when you place your original key or when you place the programming key?
2010 and it just doesn’t beep in general
@@eee19618you mean when you turn on the car? Does the audio system work on your car ? May be an issue with your cars speaker system. Check atleast the red light 💡 that glows at the same time as it sounds.
the audio system does work but it just doesn’t beep
when i turn on the car it just turns on and that’s it
i have a 2009, my dashboard looks nothing like his, dis shit dont work ova here...
what is the error you are seeing?
Doesn't work with my 2013 Dodge Caravan ...... :- (
whats the issue you are seeing? you need to wait for that first beep sound. only then you can program the next one.
hola saludos, gracias..
De nada amigo :) gracias por commentar.
Not working 😢
What is not working? Can you be more specific so that I can help you?
You can’t put that bar key in the ignition why are you pretending that works?
The key works brother!
awesome thanks
You are very welcome! Thanks a lot for commenting :)
Nope...not working on D Car 2019 !
are you trying just with 1 key and 1 keyfob?
Did not help for dodge caravan 2014
At which step you are experiencing issue?
Aree bhai kiyya yaar kiyyon logoo ki topi ghumma rahhe hoo ji. Iss traa se fob programming nahi hotti 😂😂😂
I did it live in the video and you can also do it. Purpose of the video is to help others who don’t know how to program a key.
Did not work on 2013. FWIW
what is the issue you are facing? did you not hear the beeping to program on the car?
You didn’t start the car
I am sorry its not that easy , never worked
What is the problem that you are experiencing? At what step you are having issue?
Don't work.. try it in a few cars
What’s the issue you are experiencing brother?
Complete bull$hit, this does not work
what do you mean bro, i did it and showed you in the video. whats the step you are facing issue with?
@@puttasampath No issues, I followed all of the steps, not difficult. But the new fob does not work. Your dash is different but here is what I can tell you. A programmed key when turn to the on position, will have a solid red dot. A non-programmed key will have a blinking dot, at least on my Caravan which is a 2010.
@@billballoo7881 ok. Thanks for sharing the info. Did you get it to work finally?
@@puttasampath No, the two programmed keys go in fine and the red dot is solid. I followed the steps numerous times, using different time frames, 10 seconds,12, 15 in the on position then whenever I put in the new fob, the red dot blinks, I put in the on position for 10-15 seconds, still blinks. I remove new key and it does not work.
@@billballoo7881 so the issue with the new keys then. Try the keys that I shared in description. What’s your car make and model again?