S550 Mustang Install: Quik-Latch Black QL-25 Series 1" Diameter Mini Latch Assembly
Вставка
- Опубліковано 27 чер 2024
- Bill shows you how to install a Quik-Latch Black QL-25 Series 1" Diameter Mini Latch Assembly on your 2015-2021 Mustang.
Purchase Product Here:
www.cjponyparts.com/quik-latc...
As you know, there are so many reasons to remove your panels when working on your vehicle, and with all the removing and re-attaching, things will eventually wear out. Now, not only do these correct that issue, but they also look race-inspired and are approved by NHRA for use with drag-racing competitions.
Completely made in America, these durable, and individually sold latch assemblies make it super-easy to remove and re-attach panels at the touch of a button.
Universally fitting, these latch assemblies will fit any vehicle.
Check out more Mustang Hood Accessory parts from CJ's here:
www.cjponyparts.com/mustang-h...
Check out more Quik-Latch parts from CJ's here:
www.cjponyparts.com/quik-latc...
Subscribe to CJ Pony Parts on UA-cam here:
ua-cam.com/users/subscription_c...
Music Provided By:
www.epidemicsound.com/ - Авто та транспорт
For those that don't like the look of the quick latch, you can salvage the piece by impregnating the bumper and lip piece with some fine mesh from a food strainer and a flat tip soldering iron. Doesn't add thickness if done correctly and pretty rigid.
Wow these quik latch kits blew up, when I got mine installed it wasn't seen much now I see everyone with them. These latches are amazing!!!
Can these be used on a 2014 ?
@@quany9113 yes
Another great video. Thanks Bill
Definitely needed this! Great video!
Cool! Nice install video!
Saved me a lot of money!
As usual a well made video.
Thank you.
Bill, have you heard anything about a Ford Performance Power Pack 2 for the 2018 Mustangs? 2018 production is over and still no Power Pack 2.
I cut out the hole with a knife because I didn’t have a big enough drill bit 😂 it was off a little but looks better than the bumper sticking out on my mustang
The description for this video should be revised. This install and product will not work on 2018+ as the brackets are similar but not quite the same.
How do you fix the 2018+ with this issue?
Beautiful
I think you need a bigger band on that watch.
Do you have to use thread lock also on the hood pins?
Hey i just bought the 1.5" diameter one. Which step drill bit will I need to for the bumper hole? Thanks
Dang where was this vid when my dad bumped my bumper on a pole a while back, my bumper came loose at the same spot he's putting the latch.
Will it work for a 2014 GT ?
My rear bumper clips are weak, is this possible on the rear?
Can this be used on a s197 ?
Is it possible to purchase a factory clip.
Got the same installed on my 16 S550 but my installers didn't use lock tight and I'm constantly having to re-tighten the quick latch! Now even the quick release features isn't releasing from the base and on stuck mode!
I installed these on my 16 GT, however i wasn't able to retain the black rectangular support bracket. When i try to install/keep it it pushes my bumper too far out and prevents the latch from engaging and getting a flush install. Without it, it seats perfectly and aligns they way it should. Any suggestions?
Make sure the bracket is seated properly and not sticking up because of the pin. The bracket is not 100% necessary but usually provides a better surface for alignment.
Just installed on our 2017, had the same issue and shaved down the plastic bracket with a dremel and a sander. Fiddly but fits much neater
Option 3, Zip ties
Hey, Bill. I'm in the market to buy the quik-latch for my s550. Would I need the assist springs as well or will I get by? Thanks!
The springs will make it easier to remove but I don't feel they are needed. For something like a hood yes since you open it often but you probably aren't removing your front bumper that often.
@@cjponyparts 10-4! Thanks! Placed my order last week on the latches.
Bro you don’t have to get a quick latch just go to your local body shop and they’ll simply apply some black glue let it dry and it works great for only 20 bucks
@@renegarcia7591 Already have the latches. Doesn't look bad on a black vehicle so no complains here.
@@ToxicatedValentine link please. Can't find em on site
Am I correct in saying this issue doesn't apply to 2018-23 "Gen3" cars? .... I've only seen the 15-17's with the issue. IMO, major fail on Ford's part, and I'm surprised someone hasn't come up with a solution that keeps the car looking stock.
Correct! Ford made a change to the bumper design on the 18-23 GT and Ecoboost that is way less prone to damage.
There is a zip tie fix that works well and leaves the car looking stock. Proven to hold up to high speed and all.
Option 3 use jb weld and never brake like I did still on after 2years
Jose Velasquez please explain more
Now can weld the plastic on any bumper you can buy a weld kit and fix you bumper and it’s like nothing happen that’s how it looks like after
I have a inch gap cause my clips are broken and they won’t line up
Damn wish I knew about this 2 months ago. Just replaced the bumper .... $700 after parts and paint
Kevin Manuel damm. I was literally thinking of doing the same and UA-cam just saved me a ton of money! Sorry about the big expense
I barely can see anything. A brighter car would have been better in sense of a install vid.
Al year
They used black because black on black isn't as noticeable & hidious looking as most all other colors will be.
We used black because that was the car that had a broken bumper.
Bill Tumas do a white one so we can see how that looks 😁
I imagine they didn't just break the bumper of this car for the purposes of making an install video lol. This is likely what they had.
Why not use Dzus tabs like a pro? And a lot cheaper!!!
Song name?
Hey Welcome to your channel I have a question What is the best type after Mustang Shalaby? How many prices in America are used?
33
100% there will be a man that will steal your bumper :D
Just because there’s a quick latch on the side of the bumper doesn’t mean you can take off the bumper easily… there’s like 8 screws up top, 10 on bottom and numerous push pins everywhere lol
Sounds like Jimmy Kimmel
I would figure a way to zip tie it or SOMETHING else before all that. Just not a fan of how that looks. At all…