I used this video to do my 2004. Except instead of toothpaste to mark the studs I heated the tips up with a lighter and pressed the bumper against them and they melt the exact spot where you need to drill the holes. Hopefully someone finds my way useful
Great video I'll be doing this to mine this weekend. I broke my tabs driving over a rail road track so this video saved me a few hundred bucks thank u!!
Thank you for the video! I was going to go to a body shop to have my bumper fixed, but I feel confident enough to do it on my own. I'll update this comment in the future with my results. Thanks again!
This seems to be common on a lot of newer cars that are using these urethane bumpers. My 2013 Lexus ES 350 has the same issue and I'm about to put some on mine.
They suit your beast of a car👍 thankyou for sharing. I bought the JDM ones with the rubber bands, now I'm actually gonna get the ones you have, They look alot better.
Thanks a lot. The front fascia of my car weights a ton, brackets are not holding the piece as they should, it doesn't help that the car is lowered. This is a perfect solution for this problem.
Nice vid! Ordered these for my car, this gives me a good idea what i need to do! Def looks WAY better than the bands....plus you dont need to drill into your fender like the bands require. This design is MUCH cleaner
Great video. But i noticed that with the quick latch in the middle of the bumper end, it was kind of wobbly on both ends. Due to not having a solid grip across. I would not use this on my car unless i had to take my bumper off every now and then. I had broken tabs and used soldering iron and nylon zip ties to repair the tab and holds as strong as they are supposed to. Then again, i already had a $20 soldering iron and $2 zip ties.
How's it holding up after 3 years? I just broke my clips on the driver side when installing my BOV 🤦🏽♂️... I've seen the band one but I feel like they would randomly rip due to do the summer heat 🔥
Bought some similar ones on Amazon around 2 years ago and they are still holding on quite strong. Only problem was that they faded and became a gold color instead of black
Steven Yassa soon, I’ve had a couple road blocks. Had to order more suspension parts to get it alligned. And the roof repair didn’t go perfectly so I had to redo it. But that’s done now an I’ll be posting soon. Thanks!
How often do you need to remove the front bumper? Why use quick-latches for that? The only time I removed my bumper cover from my car I owned for over ten years is to replace it after an accident. Seems like a waste of money to me - over $60
If you work on your car constantly and add things or need to access other parts behind it... then it is beneficial to have these quick releases since it is VERY time consuming with all the clips and awkwardly angled screws that most cars have at the top corner of either side of the bumper which is only accessible from the wheel well behind the fender liners along with a couple scraped knuckles
@@romagrigorenko Also, and I know this is a bit niche, but my vehicle crosses the border from RHD to LHD countries a lot. Those beam bender stickers chew, and leave goop on the lenses. I want to be able to get the front bumper off and lights swapped in a car park asap and these look like just the job. Handy video, thanks.
I show/race mine and try getting a car on and off the trailer without removing the bumper or destroying $1200 in bumpers. Car has 6 inches of clearance.
Lol dude the bumper on the S550 mustang has a ton of nuts and bolts under the hood that need to be taken off it’s not being held by only two quik latches on each side 🤣
@@abaddonguecubu6588There’s a bunch of tabs and bolts and screws that support a bumper. These are just to replace the broken screws/tabs on the side. I guess you can technically hold a bumper up with nothing but quick releases, but that’s pretty situational & dangerous
Baffling??!!! Why would someone want a quick release bumper?? 50 bucks EACH to make an easy to steal bumper... Why not just use a big lag bolt?? Maybe a gate latch??
this only takes off the hard to reach bolt on the corner of the bumper. it’s in an awkward spot on these cars. you still have to pop the hood and remove 8 lag bolts, as well as all the fasteners and bolts on the bottom of the bumper
I used this video to do my 2004. Except instead of toothpaste to mark the studs I heated the tips up with a lighter and pressed the bumper against them and they melt the exact spot where you need to drill the holes. Hopefully someone finds my way useful
You should make a video of this
Makes sense 😅
I'll try it when I do mine 🤙
Sheeeesh about time someone made this video & actually showing clear footage 👍🏽👍🏽
Great video I'll be doing this to mine this weekend. I broke my tabs driving over a rail road track so this video saved me a few hundred bucks thank u!!
Thank you for the video! I was going to go to a body shop to have my bumper fixed, but I feel confident enough to do it on my own. I'll update this comment in the future with my results. Thanks again!
How did it go?
@@mro025 It went well. I didn't align the bumper correctly so it's a bit off, but it did the job.
Thank you for this video! My 2017 Mustang just popped the passenger side. You saved me a lot of money.
This seems to be common on a lot of newer cars that are using these urethane bumpers. My 2013 Lexus ES 350 has the same issue and I'm about to put some on mine.
Thank you! I’m putting 2 on each side of my MK6 gti’s front bumper tonight
If u watching I hope u get rich one day 🙏🏿
I don't want to be rich
Awesome ,man this helped a ton ..Im about to do this to my car ..huge help
👍🏽👌🏾 God bless, man
Appreciate this video. Been debating on getting them or buying the brackets
They suit your beast of a car👍 thankyou for sharing. I bought the JDM ones with the rubber bands, now I'm actually gonna get the ones you have, They look alot better.
Thanks a lot. The front fascia of my car weights a ton, brackets are not holding the piece as they should, it doesn't help that the car is lowered. This is a perfect solution for this problem.
Really professional video, thanks for taking the time to make a video. I can tell you just doing it to help others. I install mine tomorrow :)
How did it go?
Thank you for the instructions and really recommending it
Going to get it thanks
Nice vid! Ordered these for my car, this gives me a good idea what i need to do! Def looks WAY better than the bands....plus you dont need to drill into your fender like the bands require. This design is MUCH cleaner
He'll yeah I jus ordered mine .....great video man....because of u I ordered these as I was looking for such an option
@@seanbreedlove8178 Dawg why would you have to drill into the fender?
@@thedug1692 band that links bumper to fender
Dawg, the one with the bands doesn't last and you both need to drill them. But this one in the video is better.
Very clean job ! Very helpful Video
Clear instructions,thank you sir
Thanks for the video, I just got mine back from the body shop. I had them paint match it for me.
Nice bro. Nice car too btw. Looks good
Great vid man 🤙🏼
Exactly what I needed 😎
Great looking car, what tires are you runnin?
Looks nice.
Great video.
But i noticed that with the quick latch in the middle of the bumper end, it was kind of wobbly on both ends. Due to not having a solid grip across.
I would not use this on my car unless i had to take my bumper off every now and then.
I had broken tabs and used soldering iron and nylon zip ties to repair the tab and holds as strong as they are supposed to. Then again, i already had a $20 soldering iron and $2 zip ties.
depends on the car, but you can put two next to each other to help control that. i don't think it'll be easy to do that with the S550 though
I have these same ones on my Ecobeast. Can these be used on back bumper being My back bumper is falling off?
How's it holding up after 3 years? I just broke my clips on the driver side when installing my BOV 🤦🏽♂️... I've seen the band one but I feel like they would randomly rip due to do the summer heat 🔥
Very nice video,👍👍
Wow, super nice man
GSHeverything _27 thanks man
Watched the cjponyparts video and yours came out better lol. His had a ton of gap after.
Good video.... I didn't know anything about these but these look way better than just having that piece of rubber band on there..
You order the 1”? Does it fit fine with your car?
Sweet solution! On it.
I feel like these would work great on skirting if you wanna be able to remove them on demand also
Very nice
What size did you get ? Like the diameter
Will it work on 2010-2014 mustang?
Hey this is amazing, how it holding up after 2 years?
@@jamarileroy7755 hello lil bot
Bought some similar ones on Amazon around 2 years ago and they are still holding on quite strong. Only problem was that they faded and became a gold color instead of black
I have to order 2?
Wow. Nice, I was gonna try changing the bracelets but these look clean and my car is black so they will match the paint. Thanks for the great idea.
Cool
Where did u buy it
Robert S550stang link in the description
👍💯🔥
Can people just take it off if they see the button
Can you do mines next
I wish I knew about these before getting the bands, oh well more body work
didn't know you could use this on a bumper.
Its $24 a piece or a pair?
A piece
@@chrisbellevue a pair.
They got these on ali express, 4pcs for $16
Getting a set but not those overpriced ones. There are identicle ones selling for half the price.
was his window smashed ??
Yessir. I was rebuilding this car from a salvage yard. It looked a lot worse before lol
When’s the next mustang video!
Steven Yassa soon, I’ve had a couple road blocks. Had to order more suspension parts to get it alligned. And the roof repair didn’t go perfectly so I had to redo it. But that’s done now an I’ll be posting soon. Thanks!
Romanenko Garage Glad everything worked out, Can’t wait!!
Why is it so expensive
What are you doing step bit😏
How often do you need to remove the front bumper? Why use quick-latches for that? The only time I removed my bumper cover from my car I owned for over ten years is to replace it after an accident. Seems like a waste of money to me - over $60
Denis not the point.
My car is notorious for bumper tabs breaking. It’s either getting a new bumper $500+ or a quick latch for $60
If you work on your car constantly and add things or need to access other parts behind it... then it is beneficial to have these quick releases since it is VERY time consuming with all the clips and awkwardly angled screws that most cars have at the top corner of either side of the bumper which is only accessible from the wheel well behind the fender liners along with a couple scraped knuckles
Yes is a waste of money for people who don't know anything about fixing or upgrade their cars.. 🤷♂️
@@romagrigorenko Also, and I know this is a bit niche, but my vehicle crosses the border from RHD to LHD countries a lot. Those beam bender stickers chew, and leave goop on the lenses. I want to be able to get the front bumper off and lights swapped in a car park asap and these look like just the job. Handy video, thanks.
I show/race mine and try getting a car on and off the trailer without removing the bumper or destroying $1200 in bumpers. Car has 6 inches of clearance.
What happens when you're at walmart and some knucklehead goes and presses both buttons and pulls your bumper out,,,
It’s only for the ends. The other clips screws underneath the hood is all still there
Nooby🪑
Bumper get stolen yet?
Lol dude the bumper on the S550 mustang has a ton of nuts and bolts under the hood that need to be taken off it’s not being held by only two quik latches on each side 🤣
Nooby.
I’m scared of some clown stealing your bumper or just to take it off out of spite
Do you really think the whole bumper is held on by the two push buttons?
@@abaddonguecubu6588There’s a bunch of tabs and bolts and screws that support a bumper. These are just to replace the broken screws/tabs on the side. I guess you can technically hold a bumper up with nothing but quick releases, but that’s pretty situational & dangerous
You filmed all this video and didn’t even bother to demonstrate “pushing the button”???
Beyond FAIL
You don’t know how to push a button?
You called a mustang a muscle car. That's cute. 🤭🤭
Stupid ass nigga
that was hilarious 😐
We're all dying of laughter 😐
It’s a racecar with that much hp.
Good video but get to the fuckin point faster
Leonard Hill it’s an instructional video. Learn to use the fast forward button 😂
Baffling??!!! Why would someone want a quick release bumper?? 50 bucks EACH to make an easy to steal bumper... Why not just use a big lag bolt?? Maybe a gate latch??
this only takes off the hard to reach bolt on the corner of the bumper. it’s in an awkward spot on these cars. you still have to pop the hood and remove 8 lag bolts, as well as all the fasteners and bolts on the bottom of the bumper
@@valkyrie_voodoo Which makes it even more ridiculous..
Looks tacky as hell....lol
Bought these and not even 4 days later the things popped out into pieces 🫤