Shark Vertex Review
Вставка
- Опубліковано 21 лис 2020
- We review the Shark Vertex AZ2002. Tests are performed on carpet, hard floors, and hair. Comparisons are made to a host of other Shark upright vacuums. See the Vertex on Amazon: amzn.to/35NWUZ4 or at Shark: sharkclean.sjv.io/63amE
See the written Vertex review: vacuum-cleaner-advisor.com/Sh...
We show and describe what is in the box when you get your Shark Vertex - model AZ2002. We then walk through the three tools that are provided in detail. We also describe how the Vertex pet power tool is not a motorized tool and we run a test: the Vertex pet power tool (with its finned brushroll) vs another Shark power tool with a traditional bristled brushroll.
We were a little disappointed that the Vertex tools attach using compression fit - meaning they do not click into place securely. We often find that this approach leads to the tools being put on too loosely (and they may fall off when you are vacuuming) or too tightly (and they become difficult to take off). Also, we show that two tools can be stored on-board the vacuum. Unfortunately the pet power tool does not fit on the vacuum - but the dusting brush and crevice tool do.
We feel that the controls on the vertex are intuitive and easy to use. We walk through the controls on the handle including the floor settings. And we also show the powered lift-away release button, the dust canister release button, and the wand release button. Note: in hard floor mode the brushrolls on this vacuum will continue to spin. This helps with pickup on hard surfaces but it may be an issue for some folks who have very delicate flooring.
We highlight the advantages of Shark’s lift away feature and we show how it can be used with tools. We also compare powered lift-away to non-powered lift-away (the Vertex has powered lift away). We show this using the Shark Vertex and the Shark NV360.
We turn the vacuum over and check out the underside of the cleaner head. You can see the DuoClean Technology which consists of two brushrolls. A soft brushroll is on the front of the cleaner head and, in the case of the Vertex, a combination fin/bristle brushroll is in the middle of the cleaner head. We also show how the soft brushroll can be easily removed for cleaning.
We walk through filter maintenance. The unit has two pre-motor filters and one post motor filter and we show how to access, remove, and replace all of them. While we cannot test it, Shark has indicated that the Vertex has a sealed system which means that no unfiltered air leaks from the vacuum. All the air entering the machine gets filtered before being exhausted back into the room.
The dust canister on the Vertex is large enough that you will not find yourself having to empty it all the time. However it is rather narrow and it has a tendency to get hair and dust bunnies stuck in it. So you may find yourself having to reach into the dust canister and pull some debris out.
We performed a noise level test on the Shark Vertex, the Shark APEX, the Shark NV752, and the Shark ZU632. We found that the loudest vacuum was the Vertex, but not by much (almost the same as the Shark ZU632). We felt that it still wasn’t prohibitively loud but there certainly are quieter machines.
We weighed the Vertex and it came in at 16.7 lbs. It is a little on the heavy side (but not as heavy as the APEX). We expected this to have a significant impact on movement and manueverability and while it does to some degree, we were surprised that the vacuum moved as well as it did. Movement on carpet is not bad - but you can feel the vacuum weight and the spinning brushroll fight you little on the pull-back. Movement on hard flooring is easier.
We undertook a host of cleaning tests. Carpet, Hard Floor, Hair, Edge. In these tests the Vertex was compared to a number of other popular Shark uprights. We tried to use machines in the upper end of the Shark uprights - slightly more expensive (because the Vertex fits into this category).
We found that the Vertex is very good on carpet and hard floors. It also does not gather hair on the brushroll and it cleans tight up against edges. In short, it aced all the cleaning tests.
DISCLAIMER: As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. - Наука та технологія
I have the Vertex and its an incredible machine, I have 2 black cats and im telling truly blown away with the pickup power!
I bought one today, & it rocks! Never thought I'd ever be excited by the purchase of a new vac! Lol
Me too :)
Where dis you buy it? I can't find one. 😥
*did
@@fireflie86 I got mine directly from the Shark site. You can get it cheaper, technically, on the Walmart site or other retailers, but you get more for your money from the Shark site. I got the TruePet package, which comes with tons of extra attachments and a free steam mop. You also get a far better warranty when buying from Shark directly, which is a big deal to me.
How’s it holding up now that you’ve had it a couple months?
one of the best, to the point review! no unnecessary jargon or fillers, excellent job!
Finally! I recently bought this vacuum and have been searching high and low for an in depth video explaining all of its uses
A calm rational and data-driven review. Thank you! I am unable to go out and your review really helped me understand the machine prior to a potential purchase. I especially enjoyed the detail you went into about all the features. I'm a geek for product reviews and my brain fired happy neurons when you measured noise, weight, and cord length. Who wants to watch re-runs on TV? Lengthly product reviews are one of my favs. Great job!
Thank you very much for your very thorough and informative review of the Shark Vertex vacuum. I just ordered this vacuum yesterday and can't wait to use it!
Thank you for explaining what the powered lift means and showing an example. It helped to understand a lot.
Thank you for the detailed review! You covered a few important topics (filters and their reusability) that other major reviewers did not!
Glad you found the review useful!
I feel like it needs the heaviness to weigh it down. The suction is so strong that it literally pulls me fast while vacuuming. My dyson stopped pulling forward and I was literally pushing it so hard to force it to move forward. I replaced my Dyson with this vacuum and it’s awesome! So glad I did!
I agree. I bought one today. It surprised me. It felt like I was walking a dog and it was pulling on the leash.
I agree that the Dyson needs to be pushed. Shark never needs that or as much
Thank you for guiding through this unit. I got an answer I needed here that I couldn't find in other videos.
That's great to hear.
Very thorough and fair review…just ordered one today. Thanks!
I'd like to mention @ around 15:50 when you said the dust gets caught up top in the canister. I have this vacuum which I absolutely love, I discovered the canister also opens from the top if you press the two buttons on the handle of the canister. You'll see hair and such inside the top but it does open so you can remove all the dust and such your talking about that gets stuck.
Thanks Shavuana. Good info.
Very glad to have come across your teriffic review. This vacuum has shot to the top of my list of contenders! Great job in comparing and great overall presentation. New Sub, thank you very much!
What did you end up buying?
@@radlink14 hi! We bought a Shark Navigator. I love it, it works really well!
Thanks! Very informative, the vertex is making its’ way to the top of my list.
Thank you so much for this review! It was so thorough it cleared up all doubts I had about this item. God bless you friend!
I literally just bought the AZ2000W and took advantage of the $80 Easter discount, now I’m even happier that I did after watching this video review.
Very thorough video!! Much appreciated!!
Thanks for helping me come to a decision... that was very detailed and I am pretty happy with what I saw
Fantastic, comprehensive review!
Thanks!
Your reviews are unintentional ASMR lol love them!
Darn I thought I was the only one who knew
@@Devin-ht8fq 😂😂
Main reason I watch
Same; i don't even care about the vacuums information
Wow! I just finally got all of my questions answered. I want to stop watching this video, like the other but I just couldn't he's so informative and it's hard to get my whole attention 😅🙃😊
Is it still working fine?
Just got this vacuum for my cleaning business! I can’t wait to get it. I was looking for a vacuum that does well in hard floors as well. I own a cheaper shark atm but it does not do well with the hard floors. I really don’t mind the weight of a heavy vaccum, as long as the section is powerful.
This vaccum is incredible, best shark to purchase, i had the ion flex cordless and this one is my new favorite!
This vacuum is so amazing at cleaning it makes our house look like a different house entirely!
Thank you, Shark!!
This was a great review! Very informative. But it's too bad that you didn't read the owner's manual beforehand! If you did then you would have seen that there is a door on the top of the dirt bin as well as under it. The buttons are at the front of the dust bin handle. One on each side of it. So because of that handy feature you don't actually have to reach up into the dirt bin and pull out the stuff that gets stuck. Just push the buttons in and open the top and dump it all out.
Thank you for the detailed review.
What about shark vertex ultralight HZ2002, do you think it will have similar performance to the az2002?
Very thorough! Thanks!
Your video is very informative but the conclusion just falls short. The Vertex is worthy of my consideration as oppose to what? As the VacuumAdvisor I was expecting your summary to cover what was better or comparable at the units price point. Thank you for reviewing this product. It makes it easier when going out to make a few hundred dollar purchase.
Have you had a look at the shark la502? It looks to a layman like a slightly downfeatured version of the 2002. Is the core functionality the same though?
Will it scratch the shine of the laminate floor surface? What's the small brush at the bottom of the main head, next to the brushrolls?
My Vertex picked up a ziploc bag and didn't lose suction until the baggie got wrapped around the cone going to the first filter.
Great video brother especially liked the edge of wall test. Curious though how come nobody ever explains what that little flippy brush like thingy is on the bottom of the vertex. What does it do? Why does it switch back-and-forth?
@VacuumAvisor do you happen to know the power draw (in watts) of this vacuum cleaner?
I have a nv830 currently I bought it in July I'm think about picking one of these up
Could this Vertex cleaning head be used with an ION p50 wand? Do the parts fit together?
I think it is better if the exhaust air goes down instead of aimed toward you like the duoclean speed. But that pre motor filter is tiny compared to the older Shark Rotator XL I have
What is the small brush behind the brushroll for? It rocks back and forth.
Thanks so much for your comprehensive review. It was especially helpful to see the rest against the wall. I’m wondering if you think the power fins last over time or do they eventually flatten, reducing their effectiveness?
They will probably last 3 or more years of normal use before buying a new power head unfortunately you can not change the brush roll
HI there - how high is the floor head? i.e. what is the clearance required for furniture on the roller head? and is it less high than the apex? Thanks.
Thank you for your very detailed review. It was well laid out & easy to understand. The one thing that would have been nice would have been if you showed how it performed on stairs. Though I didn't notice it in your review, some of the other videos on this vacuum that I've seen look almost as if the combination of the high suction & double rollers could be very hard on higher pile carpeting. Specifically, it almost looked as if some of what was collected in the dust bin was fluff from the carpet itself. I'd like to purchase this vacuum, but am hesitant as I'm concerned over time that this will shorten the lifespan of my carpet. What are your thoughts on this & did you notice anything like that while performing the review?
I'd like to mention @ 19:29 the shark apex will clean the hair off the roller with time. If the vacuum kept running im sure there would be less hair on the roller since the combs right above would clear them off.
Has anyone found a way to either extend the hose on this Vertex model? I notice that when you are using the tools, if you need to set down the canister, it will fall over because the hose is too short. Any suggestions on how to work around this will make me go from 95% satisfaction to 100%. Another option that would be nice is a canister rolling holder so that you don't have to hold the canister while vacuuming - it would just roll along behind you. Something like you would see on a Shark traditional canister vacuum. Thanks!
Just bought my shark vertex yesterday and used it once and it's already having trouble turning on :-/. Seems to be a common issue. Now I'm not sure which vacuum to get. Any recommendations?
Is there a 3rd spot for the third attachement? Am I missing something? It's annoying that it comes with 3 attachments but only 2 spots for them. Thoughts?
Hi Scott. I only see two spots on the back of the vacuum for holding tools.
you said nothing about the main brush roll. Can you remove it to check behind it for anything that may causing it to jam?
Excellent review! I've decided to purchase this model for its powered lift away feature, mighty amperage and sealed hepa system. I was also able to find a more aesthetically appealing variation of the model, thankfully (AZ2000), as I found the rose gold accents on the AZ2002 rather garish. On a separate note, which type of shoes are you wearing (the brown moccasins)? They look immensely comfortable and I'd like to purchase a pair for a loved one. Thanks in advance!
The brown moccasins I usually wear are Pikolinos
Is the shark Vertex hose the same or improved over the older models?
Yes I want a shark that has attachments that click on with a button. One that doesn't use compression fittings.
Should I go for Dyson Cinetic big ball nickel or vertex?
I was really looking for performance on the stairs.
Hi it seems like this product is not available in the EU, has anyone in the EU been able to find/buy this?
I think the engineers got the idea for brushes and bates from the cotton harvester industry. They've used that system for years. Works much better on vines and long stemmed weeds. With out them they would stop the machines and you would have to stop and pull them out . Seams to do the same thing with hair in households.
Hey Leigh. That's an interesting piece of information.
How do you clean the cyclone without getting it wet?
Can you please explain the differences between Models AZ2000, AZ2002, & AZ2000W? Thanks
The AZ2000 is a blue version that does not come with the pet attachment. The AZ2000W is the same but rose gold. The AZ2002 is rose gold but comes with the pet attachment.
How come I can't find one anywhere? Is it because I'm in Canada?
Excellent video. Thanks!
What you're feeling when you pull the vacuum back is the suction power. The brushes are turning forward, just like a lawn mower.
You earned a new subscriber. Thank you!
I recently bought shark Apex AZ1002C as it was coming at a low price on Thanksgiving, do you think it is better to keep or to get a vertex as it is a new model? please advice
In my opinion I think the APEX should be fine - if you are comfortable with the weight.
Honestly , I've owned the Apex friend.. and that vacuum ROCKED MY SOCK'S OFF !!! 10/10!!! Talk about suck your almost off your floor. In a great way that clearly is cleaning it big time!! On of my favorite features on the Apex is the little led light on the handle when you detach and use off of the vacuum, like vacuuming off a couch or something, or especially like a darker corner, where dog hair and dust gather galore...! That led light on handle beams down where your pointing it to suck and *BA-BOOM* you can see everything and what your getting/or not getting lol ... It's absolutely brilliant !!!! But the vertex sadly enough, I've read Anyway, does not come with that led light on the handle ...!?!? Dumb.
:( Such a great FEATURE!!!! So I'm nervous, just placed order for vertex tonight!!!?! Hope to God it's worth the $450.00 I just dropped on it !!🤞🏻👍🏻☺️
@@hayslivinthedream Did you get the vertex? If yes, what is your experience between it and the apex? I am trying to decide between the two.
I purchase this vacuum. I already don't like it, because the hose is to tight. Shark sent me a replacement hose that is the same tight hose. I find it very hard to use the lift away attachment because the hose is too tight. Why is there a ring around the hose?
How can you ask shark for a vacuum review? I’d love to review the vertex.
I was hoping the hose would be a bit more flexible so it extends for more of a reach without tipping the vacuum over.
Yeah. I just measured it and got about 5 feet of reach (to end of handle) before the unit starts to tip. I have noticed that many lift-away machines have a shortish hose. I suppose the hose may stretch out a bit with time - our vacuum is fairly new - but probably not a large amount.
I agree, but the hose does seem to be higher quality than my old Rotator.
SERIOUSLY HELP ME!! Well I've used mine 1x, and I'm wondering why I'm the only one having difficulty with it. There are too many situations where i need to hold the wand with 2 hands as I go along baseboards and this is especially true with all the intense suction but I cannot hold on to the wand with 2 hands and also hold the canister. If I leave the canister connected so I can hold the wand with 2 hands then (and I'm not exaggerating!) Every time I move even 3 inches, the entire machine completely topples over. I didnt notice it had toppled at first, and to my chagrin, i had been dragging that behind me on its side!! I only have a 600 Sq ft apartment and I've never been so exhausted and angry wishing I'd never bought the contraption! All I could think is how grateful I am that I don't have a long flight of stairs! How do people maneuver stairs if they are halfway up the flight, cannister in one hand, hose in the other hand with the base down on the floor? I mean if you're balancing yourself and powerbrushing a step, how is the rest of the machine 6 steps below maintaining stability? Also, it did pick up deep ground in dirt and dust (probably got some of the dust in the apartment below mine too 😂), the carpet had zero lines or markings that I had vacuumed. Ya know what I'm talking about right? The satisfaction you get from seeing the freshly vacuumed paths going in different directions on your floor... am I just doing it wrong or are those markings now history for me as a shark owner?
Well I've used mine 1x, and I'm wondering why I'm the only one having difficulty with it. There are too many situations where i need to hold the wand with 2 hands as I go along baseboards and this is especially true with all the intense suction but I cannot hold on to the wand with 2 hands and also hold the canister. If I leave the canister connected so I can hold the wand with 2 hands then (and I'm not exaggerating!) Every time I move even 3 inches, the entire machine completely topples over. I didnt notice it had toppled at first, and to my chagrin, i had been dragging that behind me on its side!! I only have a 600 Sq ft apartment and I've never been so exhausted and angry wishing I'd never bought the contraption! All I could think is how grateful I am that I don't have a long flight of stairs! How do people maneuver stairs if they are halfway up the flight, cannister in one hand, hose in the other hand with the base down on the floor? I mean if you're balancing yourself and powerbrushing a step, how is the rest of the machine 6 steps below maintaining stability? Also, it did pick up deep ground in dirt and dust (probably got some of the dust in the apartment below mine too 😂), the carpet had zero lines or markings that I had vacuumed. Ya know what I'm talking about right? The satisfaction you get from seeing the freshly vacuumed paths going in different directions on your floor... am I just doing it wrong or are those markings now history for me as a shark owner?
Incredible review. My bed frame is very low. How high is the front head of the Vertex?
The cleaner head is about 2.75 inches high but the dust canister is probably your biggest problem in getting further under a low bed. It is 10.5 - 11 inches high.
What's the point of non powered lift away even?
Problem with the brush roll after just a few weeks of buying it to replace the other shark
I can't believe I just watched a 25 minutes video about a vacuum cleaner. But I'm glad I did, because now I know how to use my Vertex, and I know I made a very good decision in buying it! Thanks for the video, keep up the good work!
My vaccum sucks! Real hard! 😁
He didn’t mention how the canister on top also opens to release dust debris that gets stuck ;) And does anyone else have the issue when they are vacuuming the two brushes it comes with fall off? Its quite annoying but I guess I can just detach them and reattached them when finished
Im so happy I have two apex's.
The electric connection used for the wand to floor unit prevents accessories from using a click device system.
Why? They can hook up without any electric pins.
I imagine it's still very possible to have a locking mechanism without it being made of a super-conductive metal.
Bought one and after the second use shit doesn’t even turn on. Only when it wants to how do I fix this shits brand new-.-
I need a vacuum that can get a bunch of hippy hair out of deep pile carpet. My mom wants to get me this one for Christmas.
Just got one, highly recommend.
@@matthobbie5733 Yes, loving mine so far! Such power!
Wonderful
First and I wish they would put an led light on the handle like the Apex
Interesting point. Also an LED light on the NV752 handle.
I agree. And be able to open the garage head like the Apex. They should of just put the power fins on the Apex and not change anything else. I still prefer the Apex. But I wonder if the Apex handle piece is usable on the Vertex. They look the same.
@@Sonica212 It might be able to put the Vertex floor nozzle on the Apex vacuum cleaner
@@TeslaModelSPlaid3799 I never thought of that! That would be a total game changer.
Agreed. just received my vertex a few days ago. It will replace my Apex zero M. When I detached the handle I noticed there was no light. I thought to myself...🤔 I swear the Apex had a light on the handle. Looked at the Apex and there's the light. So Disappointed Shark took that out as the light on the handle comes in handy so often. Guess they'll add that back in along with the removable top cover in their next model 😐
Yo if this dude is in an apartment or something, his downstairs neighbors probably think he's Monk or something haha. Great video though, very thorough and informative.
Love that show
Why in the world is the Vertex so difficult to pull back towards you? It feels self-propelled when going forwards, to the point that it could almost run away, but pulling it backwards it feels like I'm pulling a boulder and hurts my shoulder and back.
I believe it’s due to the suction, it’s propelling forward by the suction power, and when pulling it back, you are fighting against this.
Are you going to review the cordless model vertex too?
And if you do, ask Shark for the additional mini motorized tool. 630FJ140. Unlike the corded vertex, this brush is actually powered
Mine sucked up a toy mouse and I can’t get the top off I know how to get the blue roller off but it’s up in the top of it. Other ones there is two buttons to relieve it but I can’t find them on the vertex. Any help?
This is exactly what I meant. Many times I'd get a sock stuck in the brush head and be able to take off the top of the Apex and remove. Now its totally impossible if something gets stuck way inside the brush head. Horrible design. Apex is way better still.
You can disconnect the hose from the base of the power head and you might be able to reach in wth a pair of needle nosed pliers. If you look at your owner's manual it will explain how to open that area for clearing out clogs. It's that really short section of hose that curves upwards.
How much is it?
Vacuum Advisor new sub here
Thanks a lot Ed. Good to hear.
my vaccume does not TURN ON
What we dislike VacuumAdvisor, just kidding good job with your videos.
I am a subscriber
I miss the light on handle . I kept my brown apex cuz of this
Same! I wonder why they got rid of something so simple yet so helpful at the same time.
There’s practically no real world performance advantage with the Vertex, so might as well keep the Apex until a real upgrade comes along.
@@Mysterios0 I suppose that would be true if you don’t care about edge cleaning or hard floors
$280 at Bed Bath Beyond, with 20% off coupon. I really liked your unbiased review rather than that other channel that's obviously getting paid by Shark.
Why aren’t you uploading any new videos about vacuums
Yeah - its been a while. Got kinda busy. I have just finished a written review on my site for the Shark Vertex Cordless and will get started on a video review for that unit very soon. Thanks for asking!
This vacuum is very heavy. I am 45 years old and I feel this vacuum is so heavy. I like that the brush doesn’t have hair after finished vacuuming. But I don’t like the weight of it.
And do you think this is one of the best sharks
Vertex is the shit, an all around vacuum cleaner,one cool feature is the handle will plug directly into the cleaner head if u wana vacuum ur steps without having the long tube attached,only thing i dont like is the tool caddy sucks cause i constantly lose my turbo cleaning off of the vac
Bought one Sunday. Who says you can’t vacuum everyday?
How’s it doing now that you’ve had it a while? I just got mine yesterday.
@@Mysterios0 phenomenal! Still amazed what it picks up after only 4-5 days in same spot. Makes me wonder how much stuff I was kicking up into the air with the old vacuum 🤮
I just put my one together and it won’t turn on, I hate it. Brand New!
Take it back to the merchant?
It looks like that vacuum really sucks 😆
Its big, not nearly as easy to use as previous sharks, turning is even awkward….very dissatisfied
why is it so very noisy; too laud
noise is due to the powerful suction (like an engine). If it was quieter, it would suction less. to explain, an electric motor spins a fan or turbine that causes negative pressure out of an exhaust (which produces suction from the intake or the entry of the vacuum cleaner). does this make sense? powerful engines, like cars or airplanes, are louder. lower wattage or low power vacuums are quieter. perhaps you can reduce the noise by reducing the vibration, but it is already a slim device.
literally every vacuum ever made has a "compression fit system" for hose attachements. I stopped watching this review and gvae it a thumbs down after that dumb line.
I'll be honest, 25 minutes is a bit long for a vacuum review for me.
ohhh i cant pull off or push on attachments.. waaaaaa... BORING
I can’t with this horrible audio quality. It’s going to ruin my speakers. Skip.