Im a mechanic, and have a 12V and a lot of customers like to ask me how reliable it is…I say ‘well…a known common issue with them is that they like to crack the block between cylinder 5 and 6…at between 20 and 22,000 hours in marine, genset, agricultural, or commercial applications, or at 1.1-1.3 million miles in medium duty or light duty applications.’
@@netrioter worth it man, youtube doesnt like his content so its his only way to do it full time without selling out to stuff like raid or raycon. Thank susan wojicky
I expect to see "Peg's Careful Body and Paint" shops opening soon all over Canada. This kind of "quick, but caring" automotive repair expertise deserves to be set free! Mint! 👌
We have a 2nd Gen Cummins at our shop right now because it fried the PCM (go figure), and it keep spitting belts due to mismatched accessories.. Dodge made 3 different alternators, 2 tensioners, and 2 AC compressors for those trucks.
“Dad carries a stick around with him everywhere, why the fk can’t I” “Hey Dad, when you gonna give me one of those sick timber leg augmentations like you gots”
Man this shit really puts a smile on my face, great content, all that traveling you did reminds me of about a month ago. *Warning!* *Paragraph ahead!* Had to move across the country here in Australia, was about a 5000km trip and took about 3 weeks, had to go all the way through the outback and around a state cause it was (still is) in full lockdown, right through near 40 degree C temperatures right in the middle of bumfuck nowhere with the aircon sometimes not working well enough to keep in the car cool, and we had to camp at every stop. We had two cars; a 2002 commodore wagon loaded up with enough shit to squat the rear end a little, and a 2002 Saab 9-3 convertible that had trans problems not even half way through, some of the roads were fucking terrible, one big road we went on was just real rough and gravelly, really gave the suspension a run for it's money (we where going anywhere between 80 to 110km/h though), I think we where driving on that road for the better (or worse) part of 9 hours or something, blew a tyre doing 110km/h on some paved road, sidewalls just came apart in chunks flying this way and that and the tread came out from the wheel well and rolled a couple hundred meters off the road, there was a lot of gravel roads and I was damn glad when we got back to paved roads, some real cool sights out and about in the middle of nowhere, one place, called 'the devil's marbles' was a huge rock formation of rounded boulders with varying sizes as far as you could see, there was heaps more, this is only a few things, but this has become a whole paragraph, so I'll cut it short here. Keep up the minty shit peg!
I’m feeling a lot more confident on tackling some bodywork now that you have provided such really great tips. 👌 Thanks Peg for another minty AF vidgeo 👌
I knew an old farmer in Sebring Fla that had an old dodge with Cummins like this. He drove it from south Florida to Alaska every year to go fishing. It has 1 million miles on the original Cummins.
When you lose hope and feel like throwing the towel in, tony climbs in with a smile ! Tony you are a great inspiration to never giving up! Mat your dad's the best!
You know peg did a minty job when a guy’s uncle that works on collision repairs says “It actually looks pretty good”. Love the videos peg keep ‘em coming 👌👌👌
I gotta buy Merch and join . I love this guy he's beyond crazy smart and very entertaining. I think he feels better slamming gas and breaking shyt. Super fun stuff.
secret tip for sprayfoam body work tape over the outside and spray from the inside it comes out smooth and looks mint with paint. if you want to go real the extra mile add bondo
The thing about fusor is. It would hold that whole truck to the side of tree hanging 5 foot off the ground. We used fusor cans of spray paint to peoples boxes. Legend is to this day there’s still one on my tool box
I don't know if he figured this out but my 98 12 valve had a bad voltage regulator, which is in the computer for some stupid reason 🤔. But I put power to the alternator and it started charging correctly, so the regulator was actually working. It was the computer not sending power out to turn the alternator on though. So I found that power wire at the computer and cut it, and just put power straight from the battery to it and everything started working fine. It's been years since I figured it out and zero problems. I did put a lot of over built wiring back into the truck though. A whole new fuse panel coming straight off the battery, that has a 30 amp magnetic relay that only comes on with the key. 3 new gages are powered from the same panel as well.
Looks like you gave the Dooge owners sumthink to say aboot the Cummins Peg. Mortsky gave us a class on the use of a log fer body panel repair the other day and you showed us how lumber works for structural. 🔨🔧🍺
As a HUGE Mopar fan I really have to thank you Peg for treating that old darling with the minty freshness that I have come to expect from you. Its just mint and will easily last another 400,000 with those restorative repairs. You don't F*%$in' need to worry about tetanus from that rusty old broad just send it into the ketchup!
American here, working on a century old canoe bout three decades back and I wondered what kind of wacky screws are these. Square hole, brass, Robertson drive! I converted soon after cause they stay on the old twisty stick and you gotta try hard to strip!
Yeah, I got a 99 Bigblock GMC Suburban, and a 06 purple Colbolt, I use the colbolt for work, goes about a week on a tank of gas, my Suburban, needs fuel every 2 days lol. But I love the Suburban!
This is hands down one of the funniest videos ive ever watch just based on the the constant flow of insults, sarcasm and swears coming out of zip ties mouth
Hilarious content!!!! LOL If the original (FSS) fuel shut off solenoid is wired in and you remove the positive lead on the battery the truck will shut off cause the power running to the FSS will no longer keep the plunger from dropping down thus shutting fuel off. If that FSS is in but the plunger is removed you will have to have a pull lever like the hood pull/release cable to shut the engine off.
on a dodge i had the lightswitch had a loose wire and the power went threw the amp gauge wich melted out of the dash while i was driving it..prio to that it had intermiten power outages and not wanting to charge..also on the drivers side of the radiator the bolt with the grounds on it man its a nightmare you touch it it gets bad from there lol but if you have ground problems check that ground near the drivers side of the radiator..i ended up with my truck putting a delcoremi in it from a 83 chevy worked great!
Willard really wanted you to throw that stick😂😂 stunned, also some very some high level body work done, gonna have to take pointers from ya peg, got a rocker panel made out of expanding foam👌 fuckin mintt
Not too bad at all! You made it look all purdy. I would drive that every day for years if it weren’t for the fact that it literally couldn’t do that with the previous owner having invested in the Dodge frame delete package and all that. Still want any truck to be honest with you- any truck over my silver sex box of a Chrysler.
Damn glad you put it in the shop so I would know which one was the parts truck and which one was the keeper!!! It ain't easy being one of your loyal viewers.
How frickin minty !!! I was out gettin er done last nite .leaving the bar a fella was wondering if the 4wd was up to snuff...so a detour was in order and the rest is foggy.
1992-1993 trucks, the PCM regulates the voltage.... the PCM's are also known for failing lol Alternator on that blue truck may have been good, and the regulator on the firewall was just bad.
I remember that dang van you gave hell coming up that mud hill. Those dang seatbelt you cut out saved you. That minivans fan was singing a song bc you overheated so much. Lol .That was awesome. It held up too and got you out! I think it was a dang Dodge too huh? Anyhoo, good shit Peg. Appreciate the vidjas from N AL USA 👍🇺🇸🐍💪
YE SAID WHAT!!! im going to have to brush up on me Shakespeare but im going well with the shakes bit! !feck! Christmas logging pissups are working there charm. good on ya mate. keep it up
You holding a class on them body working skills? I feel like I have lots to learn, but I dunno if I can handle all the PC lights required.
It takes many years of liver seasoning to become this hard of a piss tank!
Next he is going to turn it into a sedan delivery.
DD speed shop DD speed shop
@@MP-io7yj DD speed shop?!
Only two channels I come for body work lessons !
I still gotta figure out how to wheely in NYC and stay outa cuffs 🤔...what's it got PEG JRRRRRRRRRRR!!!!!!!!
Put Junkman on the bed of the truck
Send it
It's there is anyone I would call for a NYC wheelie, it's you minty pr!cks!
Its your fault for living there. No sympathy for you.
ND in the house ..sup dude!!
Im a mechanic, and have a 12V and a lot of customers like to ask me how reliable it is…I say ‘well…a known common issue with them is that they like to crack the block between cylinder 5 and 6…at between 20 and 22,000 hours in marine, genset, agricultural, or commercial applications, or at 1.1-1.3 million miles in medium duty or light duty applications.’
"Structural body trim".
Dan from DD Speed Shop DD Speed Shop is just crying while laughing right now.
Loving how loyal Willard is. Can't wait for part 2. MINT!! 🐕👌
Throwing his stick on the roof was not cool tho.
No … no…. It wasn’t… got butt hurt over that too.
I'm from the future and I think the stunned twat forgot.
We need a SLAVE LAKE revival! I miss the old girl!
Christmas special probably coming up
What a mint sunday, always a treat when peg uploads!!!!
*Mintt* 🍭
Kinda...he wants you to pay for it now tho...
@@netrioter worth it man, youtube doesnt like his content so its his only way to do it full time without selling out to stuff like raid or raycon. Thank susan wojicky
Fixing her up like that made her much more aerodynamic. I bet she handles much like a sport version now. And better on gas too. Good work.
gas? what gas?
@@nikyjim it does'nt use any gas now... I would bet my last bandaid on it.
@@andrewmunchkin7212 It never ever did
You can tell how quiet it is now
I expect to see "Peg's Careful Body and Paint" shops opening soon all over Canada. This kind of "quick, but caring" automotive repair expertise deserves to be set free! Mint! 👌
I’ve learned so much from this guy nothing OSHA would approve but lots of stuff
This is the video you watch that osha's would not approve of
We have a 2nd Gen Cummins at our shop right now because it fried the PCM (go figure), and it keep spitting belts due to mismatched accessories.. Dodge made 3 different alternators, 2 tensioners, and 2 AC compressors for those trucks.
I'm gonna be ripping the ECM and completely redoing the wiring on my D350. That's after I finally find a front end.
Willard doesn’t seem too impressed with that shipping crate.
He's stunned aboot everything....
Just a treat on a Sunday afternoon. It's not done until you roll the shed paint on with a 12" roller
Willard is stunned, but I'll be dipped if that dog don't WANT to play fetch 😂 that's like the third time he's brought leg a stick in this video alone
“Dad carries a stick around with him everywhere, why the fk can’t I”
“Hey Dad, when you gonna give me one of those sick timber leg augmentations like you gots”
Man this shit really puts a smile on my face, great content, all that traveling you did reminds me of about a month ago. *Warning!* *Paragraph ahead!*
Had to move across the country here in Australia, was about a 5000km trip and took about 3 weeks, had to go all the way through the outback and around a state cause it was (still is) in full lockdown, right through near 40 degree C temperatures right in the middle of bumfuck nowhere with the aircon sometimes not working well enough to keep in the car cool, and we had to camp at every stop. We had two cars; a 2002 commodore wagon loaded up with enough shit to squat the rear end a little, and a 2002 Saab 9-3 convertible that had trans problems not even half way through, some of the roads were fucking terrible, one big road we went on was just real rough and gravelly, really gave the suspension a run for it's money (we where going anywhere between 80 to 110km/h though), I think we where driving on that road for the better (or worse) part of 9 hours or something, blew a tyre doing 110km/h on some paved road, sidewalls just came apart in chunks flying this way and that and the tread came out from the wheel well and rolled a couple hundred meters off the road, there was a lot of gravel roads and I was damn glad when we got back to paved roads, some real cool sights out and about in the middle of nowhere, one place, called 'the devil's marbles' was a huge rock formation of rounded boulders with varying sizes as far as you could see, there was heaps more, this is only a few things, but this has become a whole paragraph, so I'll cut it short here. Keep up the minty shit peg!
Hell yeah i love Australia! Nicest people on the planet hands down! I plan on going there one day!
Fuckin MINT!!
13:24 dodge rust is just something else with how well it held that bolt
Illusion of safety😂 Jesus.
Love your videos. Glad to see you over here.
@@deanfisher9345 thank you!
I think peg has a crush on ya😉
Their both married 😂 one of em happily married 🤣 guess which one
@@binodajuan4342 I'd say peggy
Lovin all these hour long peg editions
I’m feeling a lot more confident on tackling some bodywork now that you have provided such really great tips. 👌
Thanks Peg for another minty AF vidgeo 👌
I knew an old farmer in Sebring Fla that had an old dodge with Cummins like this. He drove it from south Florida to Alaska every year to go fishing. It has 1 million miles on the original Cummins.
There is just something about the sound of a dodge being mercilessly shit pounded that just warms my heart.
The fact he got it too look that good in the time he did it really amazes me never disappoints
aww his pup just wanted to play ;(
When you lose hope and feel like throwing the towel in, tony climbs in with a smile ! Tony you are a great inspiration to never giving up! Mat your dad's the best!
You know peg did a minty job when a guy’s uncle that works on collision repairs says “It actually looks pretty good”. Love the videos peg keep ‘em coming 👌👌👌
I gotta buy Merch and join . I love this guy he's beyond crazy smart and very entertaining. I think he feels better slamming gas and breaking shyt. Super fun stuff.
Surprised it didn’t break in half when you put it on the lift
secret tip for sprayfoam body work tape over the outside and spray from the inside it comes out smooth and looks mint with paint. if you want to go real the extra mile add bondo
Need another junkyard revival and road trip.
That one with the Van was definitely fun to watch.
This is the best episode of red green yet
Well Peg, here I am re-watching your old vidyas...dude, you're the most entertaining on UA-cam...thanks man 🤘
3:33 Peg's accidental face reveal.
650,000 TONS!!
Ha lol
Uh oh. Weirdos on the internet are gonna be Jerkin now
The thing about fusor is. It would hold that whole truck to the side of tree hanging 5 foot off the ground. We used fusor cans of spray paint to peoples boxes. Legend is to this day there’s still one on my tool box
I would’ve sold it for 10 grand after you did the body work
I could be wrong, but I think some alternators excite when you ground the field wire.
Hell yeah, I know a bud in Chilliwack/Yarrow area. Good dude. Knew another one, but he has passed onward to the junkyard in the sky. RIP Guy!
20:49 that dodge is spoiled by all the red tools
I use to compare Canadians to Dave's farm in the early UA-cam days. Now I compare them to old zip ties . Good channel.
Great video Peg 👍 it’s like #Roadkill only cooler
I don't know if he figured this out but my 98 12 valve had a bad voltage regulator, which is in the computer for some stupid reason 🤔. But I put power to the alternator and it started charging correctly, so the regulator was actually working. It was the computer not sending power out to turn the alternator on though. So I found that power wire at the computer and cut it, and just put power straight from the battery to it and everything started working fine. It's been years since I figured it out and zero problems. I did put a lot of over built wiring back into the truck though. A whole new fuse panel coming straight off the battery, that has a 30 amp magnetic relay that only comes on with the key. 3 new gages are powered from the same panel as well.
Anybody can go off-roading in a 4x4. Peg is a real man he goes four wheeling in a 4x2.
Looks like you gave the Dooge owners sumthink to say aboot the Cummins Peg. Mortsky gave us a class on the use of a log fer body panel repair the other day and you showed us how lumber works for structural. 🔨🔧🍺
As a HUGE Mopar fan I really have to thank you Peg for treating that old darling with the minty freshness that I have come to expect from you. Its just mint and will easily last another 400,000 with those restorative repairs. You don't F*%$in' need to worry about tetanus from that rusty old broad just send it into the ketchup!
People used to make fun of me for using Rust O Leum paint and a roller on my old Chevs, now I feel better. Thanks for a another awesome vidya
Fell out laughing when peg launched the dogs stick on the roof of the trailer!
Theres so many moments that just make me laugh.
American here, working on a century old canoe bout three decades back and I wondered what kind of wacky screws are these. Square hole, brass, Robertson drive! I converted soon after cause they stay on the old twisty stick and you gotta try hard to strip!
This man could survive an apocalypse in comfort.
Yeah, I got a 99 Bigblock GMC Suburban, and a 06 purple Colbolt, I use the colbolt for work, goes about a week on a tank of gas, my Suburban, needs fuel every 2 days lol. But I love the Suburban!
Can’t wait for part 2!! I’ll be checking the page daily 😂
This is hands down one of the funniest videos ive ever watch just based on the the constant flow of insults, sarcasm and swears coming out of zip ties mouth
Just when you thought there's nothing to see here. Peg saves Sunday night
Hilarious content!!!! LOL If the original (FSS) fuel shut off solenoid is wired in and you remove the positive lead on the battery the truck will shut off cause the power running to the FSS will no longer keep the plunger from dropping down thus shutting fuel off. If that FSS is in but the plunger is removed you will have to have a pull lever like the hood pull/release cable to shut the engine off.
Dodge=Willard=stunned
Loved seeing the old dodge get some love they really are good trucks.
This dodge is mint. I approve. And I’m a mopar guy
on a dodge i had the lightswitch had a loose wire and the power went threw the amp gauge wich melted out of the dash while i was driving it..prio to that it had intermiten power outages and not wanting to charge..also on the drivers side of the radiator the bolt with the grounds on it man its a nightmare you touch it it gets bad from there lol but if you have ground problems check that ground near the drivers side of the radiator..i ended up with my truck putting a delcoremi in it from a 83 chevy worked great!
Willard really wanted you to throw that stick😂😂 stunned, also some very some high level body work done, gonna have to take pointers from ya peg, got a rocker panel made out of expanding foam👌 fuckin mintt
i am from BC and i agree with this message. I have stayed at that hotel in hope when I was working there few years ago
Awesome episode Peg, Looking forward to the next !
Not too bad at all! You made it look all purdy. I would drive that every day for years if it weren’t for the fact that it literally couldn’t do that with the previous owner having invested in the Dodge frame delete package and all that. Still want any truck to be honest with you- any truck over my silver sex box of a Chrysler.
Oh yeah! She looks goooood at 50ft doing 50mph!
Damn glad you put it in the shop so I would know which one was the parts truck and which one was the keeper!!! It ain't easy being one of your loyal viewers.
That would be a good intro when you were doing burnouts in the 12v at the beginning of the video
I don't know why I find such joy watching your derelict adventures lmao I love you man
u need to find an old merc with a minty om617 and puter thru the paces
Agreed
How frickin minty !!! I was out gettin er done last nite .leaving the bar a fella was wondering if the 4wd was up to snuff...so a detour was in order and the rest is foggy.
Yesss this is what ive been waiting for🤘🏻
Nice username and profile picture
Honestly my truck needs some of this TLC. Can't believe the wipers were still swiping on that Dodge tho!
I have been a long time follower and I want to see you in a burnout contest.i laugh my ass off at every episode. Thank you
You make my ole ferd happy. Just put my first gallon of motor oil in her fuel tank the other day. She still purring
I miss the videos with all the cursing not being edited out.
My 1964 Dodge W300 4bt swap was a real turd when I got it🤣🍻Minty AF video BTW😉
Throw the stick!!!!😂
Lmao I noticed that ti
I still don't know how this man doesn't have a million subscribers been watching since 2012
I’m starting to wonder if peg is secretly a rally driver…
The stigs Canadian oil field cousin from hell.
Hey peg.
Thx for the heads up on BC
Hey my Dodge is always reliable, always gets me to the shoe store!
That's not bodywork it's bodywellfare lol
We got way too much damn snow here in North Michigan....i dont like winter when your pishing snow with your bumper...faaack!
My phone was acting a bit strange while watching this, i think the dodge is infecting it with electrical issues
🎵🎶"Well there's a truck drivin' legend in the north today....
A man called Peg from Alberta C-A..."🎶🎵
Best REZERECTION on lube tube ever!!!
You dont need saftey keep up the good work ol buddy. from a southern american buddy
Hey Peg , how much for that beauty of a dogde . I need one of them classy booze cruise wagons for my high-school reunion.
I got trucks going from Chillicrack to GP every week. Can haul shipping crates
Id be afraid to drive that to town for a coffee, nevermind a 1200mi trip 🤷♂️
You'd probably suck it up and drive it to town for your precious latte. Christ.
Cityidiot lol
You should get with a metal fab shop and come up with a ztbp loggers box! Mint….’d gold
and now we all understand how every 1st gen turned into a sacked out pile, these things were worked like rented mules and were too stupid to give up.
1992-1993 trucks, the PCM regulates the voltage.... the PCM's are also known for failing lol
Alternator on that blue truck may have been good, and the regulator on the firewall was just bad.
People who take the poison today, will try and force you to a camp tomorrow
like they're doing in Australia
@@hank1556 exactly.
I remember that dang van you gave hell coming up that mud hill. Those dang seatbelt you cut out saved you. That minivans fan was singing a song bc you overheated so much. Lol .That was awesome. It held up too and got you out! I think it was a dang Dodge too huh? Anyhoo, good shit Peg. Appreciate the vidjas from N AL USA 👍🇺🇸🐍💪
Knew I liked your content. Manual trans. 60 myself. Can't buy a car without it. Flood damage in Bc is awful.
Another great one Peg! Very informative with the expert metal work and paint, and such wholesome entertainment for the whole family!!
If you where doing a concourse restoration you can also use liquid nails on your patch panels
Back when Dodge was still good. Holy heck this guy can do body work on the fly. MINT.
This has to be one of the best channels on UA-cam
47:26 Heard that little diddy on the radio, and all I can think of is Eric Cartman at the White House "IT WAS THE HEEEAATT OF THE MOMENT"
Ram truck's GRAB LIFE BY THE HORNS 🤘🤘🤘🤘 AND 6 in a row ready to go.
YE SAID WHAT!!! im going to have to brush up on me Shakespeare but im going well with the shakes bit! !feck! Christmas logging pissups are working there charm. good on ya mate. keep it up
When he said “light bar” at 40:00 I thought it was code for his 12 pack of Busch lights. Haha
I loved doing this shit as a teenager. I can't imagine how fun it would have been as a semi adult. Fuck yeah brother.
????
It’s never too late.