WON TON RICKSHAW!!!
Вставка
- Опубліковано 23 вер 2024
- LIKE AND SUBSCRIBE!
COME GET THE UN-EDITED, GREASY VERSIONS OF MY VIDYAS, AND MORE OVER AT MY PATREON:
/ ziptiesnbiasplies
FOR A FLAG OR OTHER MINTY OTHER MINTY SWAG GO TO: www.ziptiesnbi...
COME SEE THE JUNK PICTURES I DIAL TOGETHER ON MY INSTANT GRAM: / ziptiesnbiasplies
HERE'S MY P.O. BOX!!
ZIP TIES N BIAS PLIES
PO BOX 85
GROVEDALE, AB
POSTAL CODE: T0H-1X0
EMAIL MY FAT ARSE IF YA GOT ANY SUGGESTIONS: ZIPTIESNBIASPLIES@GMAIL.COM
DISCLAIMER: NO ALCOHOL WAS CONSUMED IN THE MAKING OF THIS FILM. DO NOT TRY ANY OF THE STUPID THINGS I DO! I AM A TRAINED PROFESSIONAL IN ALL THE ACTS YOU SEE IN MY VIDYAS! WATCH AT YOUR OWN RISK!!! EVERYTHING I SAY IS NOT MEANT TO BE TAKEN SERIOUSLY, EVERYTHING IS A JOKE!
#7.3IDI #powerstrokediesel #coldstart #cat #CATDIESEL #detroit #detroitdiesel #ZIPTIESNBIASPLIES #diesel #smoke #burnout #tiresmoke #7.3idi #gas #truck #bigtruck #truckjumping #derby #toughtrucks #tufftruck #builtfordtough #fordtough #fordtuff - Авто та транспорт
if ya Wana hear the greasy chit, and watch a few Patreon specials, come have a gander at the ol' beer fund!
www.patreon.com/ziptiesnbiasplies
My dumbass got my finger in the brake caliper when I had it hooked to an air compressor, smashed my finger when the piston shot out of it. Hurt like a mf
I love the rowdyness in this vidja right knarley boys 🤘🏻💯🤘🏻
Peg, your damn straight….1267 is fine, fine oil.
What you ought to do, is refine the shit yourself.
Refine? I can’t do that…..sure ya can..
Essentially all your doing is separating by weight.
The light stuff, is real volatile…
The mid stuff is engine oil….
Between those two levels is heating oil, kerosene and diesel.
I would make up a separation still, buy some of that crude and experiment.
Then
When the SHTF….you know how, and can pass it on to your boy.
ua-cam.com/video/vD0kbdIS6kE/v-deo.html
There are lots of videos on it.
If you are reading this... trust me... it’s worth it...go and subscribe 👌
Either I'm stunned 😲 or Willard is so stunned that his stunned is wearing off on me because ive never had a pair of fog lights like the commercial said I never had .... but my dad helped me because I can't wait for fog and whatnot.... they are bright but I use them for scary back roads....... Wtf commercials are you sponsored by.... Sylvania LED 9004 fog light commercial ???? " scary backroads"..... because deer are scary ... I'm so stunned 😲 I hit them for the fun of it just for meat in my freezer....
Peg is the “nationwide villain of the DOT”. 1 ton rickshaw just bypassin the scales
You dont need scales to know peg is loaded in multiple ways
Weekend just got better. You're a legend Peg
Yessir 🤘😁
Peg leg for the win
Will half to agree on that
Just minty as fcuk
I second this motion
"Took a bunch of this shit outta the cat so she's free flowin"
That was the most valuable part of the whole thing. 🤣
lol I had a rickshaw just like it and it got stolen about 6 months back. I didn't even report it stolen! lol
@@mromatic17 I think we've found your rick shaw XD
@@docsgearheadgaming2503 really? im in utah and it was a gold infiniti qx4 lol
"when you get it from the dump,the ratings are different"-now THERE's a quote...gotta love it
I thought the chocolate syrup would definitely garner a “How dare you!” 🤣
Love the heavy-metal lathe montage. Oh and by experience, the right amperage for weld-trought rust is all-of-it, it maybe or maybe not melt on the ground but that's the way she goes.
Peg , this was one of the best videos yet ! Had to shush the old lady 3times . Laughed my ass off at the Won Ton ! Your a genius at repurposing junk ! Keep up the great work.
I have the greatest time watching these videos, thank you Peg for all you do
I was at the scrap yard yesterday and rummaging through the dump end of it and found to running letter openers . ( Chainsaw) both ran when put gas into them . I put gas in them and brought the value up a tad .
Oh had to bow-out at 35 minutes due to fatigue; was seeing four trailer tires instead of two. Do not know what I am more jealous of, the fact you have an excavator, or the fact you can operate it---pretty strong man! Cutting and fitting springs, welding in catch straps and turning rotors; looking forward too the second half. Laughed my ass off when Sir Willard was tweaking biscuits in the background, probably fighting a Moose! Take ur easy and stay safe. Keep that Busch light cold!
I was having a real bad day. Peg your videos always make me laugh. Thx bud.
likewise, God bless
Same here. Peg is quite the guy the videos always leave me laughing to the point where my family is asking what the hell is so funny
Williard looks like he made it through the winter pretty well. He is growing from all them biscuit and gravy scraps.
Hell Peg, if you keep eating that biscuits and gravy you might even grow a new leg! That stuff can do that ya know! I know because all my family from Kentucky, all the men anyway said "eat your biscuits and it'll make yer pecker grow". I was only 8 at the time but you know, they were at least half right.
I did a thumb tip delete with a knife and it grew back a bit longer.
I'll try it next on my dick, don't worry I've left the bulbs on!
He's STUNNED you noticed!!!
When life gets you down... Watch some zip ties and bias plies, and all is minty again!!
"They were all out of that at the dump" 🤣
Thank you for adding Willard to your video this time you may be stunned but I can tell that he's a minty part of your life
Every one should have a dog named Willard
Damn right! We're all stunned....
My god, nothin beats a good vidja from peg!! I wish to be half as good as you are at making old stuff work. No idea how you come up with all those legendary lines.
Are you buying your parts from the dump
Keep givin’er Peg. I always look forward to new vids.
Ol’ Willard is a “stone cold stunner.”
Take care bud.
You got another well deserved like from me. I wish I could do more.
Always bringing quality content Peg. And to top it off using a news clip from my home town?! haha! That's pure gold right there.
I remember watching that same News Cast! That really cracked me up !!! lol
Was that in maine?
ITS A FULL HOUR VIDYA, GRAB YER BEER AND LEFTY SMOKES BOYS
and neutral drop gave you a shout out a vid or five ago. you need to get your little man to give us another "whats it got stunt man" line hahahaha
they are beauty!
@@ziptiesnbiasplies minty
You’ll have to cut a piece of conduit or black pipe to weld to the axle and put the end of the spring in. I cut springs on the race car and tried welding the spring once, it broke the weld immediately. Coil spring metal rotates as it compresses, hopefully yours doesn’t fall out
I will just keep weldin it until I die in a fire filled crash!
@@ziptiesnbiasplies Nah mate, just do what Trail Mater did on his brock leaf. Edited didn't get to the sling part before gobbing off cos I'm stunned, I thought the rickshaw was leaf spring like my mates D21 wickshaw
m.ua-cam.com/video/ZNbt0GPobT0/v-deo.html
Here's another mint idea, call your vidjas ungreased then beep the 1st 7mins and the greased. I doubt the YT pussies will what the full 50mins of you doing minty as fuck shit👍🏻🍺
I cut 100s of springs as long as they have something to limit the extended travel you're fuckin home and hosed with plenty of crack in ya pipe
It's a wonderful thing that young mechanics have a vast educational resource such as this channel. You'll show em how to and what for.
Love it!! I've turned rotors with a fly cutter and rotary table on my mill. Threw cast iron shit everywhere.
"I almost kill myself at least 15 times before lunch" 🤣🤣🤣🤣
it's the way she goes
I love this channel ❤️ ❤️ ❤️ ❤️ hahaha thanks peg for all the ketchup you have feed me bud boy has the struggle been real at the home front lately the ride home in the rickshaw really helped me out today man thanks for the smile and the getaway I really appreciate everything you do thank you
thanks for watchin bud
When he said " holy sweet flying fiddlers fuck" I lost it 🤣🤣🤣🤣
I know right 😂
I’ve been trying to wait as long as possible to watch this but I can’t wait anymore.
Not gonna lie, Peg really knows how to do it all, A true man’s man.
Drunk, stunned, but can turn a mid level suv into a DOT avoiding towing machine… Peg and Willard for Canadian Prime Minister
"I didn't know there was a colored one" 🤣🤣🤣🤣🤣🤣🤣🤣
"Every day of my life is like a rerun of "The Red Green Show".. with more alcohol.." You are the very best!!
If the women don't find you handsome they should at least find you handy
Time to pack a bowl and crack a beer. It’s Friday night in frostbackistan
Your narrative is pure gold.
Down here in the middle of bum fuk Egypt Iowa where we grow tons of corn, ethanol made from it is over $3 U.S. I drive a 1995 F-250 with a 7.3 turbo and still under 130,000 original miles from California so no rust yet.
YOUUUUU DONT gotta worry when your van van vanning your rickshaw and there's a road pirate right next to youuuuuu
Im watchin your new vid after i finish the comments here ffs👍🏻👍🏻 love ya man🍺🍺
A pair of coil over shocks would be good on the trailer. Hopefully someone will leave a set at the dump or you'll find som on a vehicle.
Wrap the chain with duct tape when it’s pulled tight. It will stop the clatter. Did this once
She’s melting in the East too. Should be snow free by June at this speed.
@Jim jibroni I hear that. Fun when we were kids. Now, not so much.
The old "Limiting Chain" 🤣
Can we agree that his rig Shaw is loyal as f
"Procrastination been hittin pretty heard round here." Same here Peg.
My hispanic bud is big boy we call him Juan Ton.. and he loves it...
Great video as always Peg! And shoutout for using the Timmy clip! Lab law, lab law timmah! Mint!
They say u can get air bags and all that shit for this,,,, but they were all out of that shit at the dump... haha funny shit.
I've been looking out for the "Willard your stunned" t shirt
I got no one to talk to but my cat, I'll drink to that.
Loving the Rickshaw Peg, Looking forward to more content and more ''50FT Anti pullover and drop 'em bodywork''!!
Peg, you have to have a tee shirt made with a picture of Willard on it with a caption saying "Stunned!".
That's a shirt I'd buy
I'm not here to talk about Willard being stunned. I'm here to let you tell me Willards stunned.
Great job Peg, you make me laugh. I've missed your new video's, been running out of 9v batteries to chew on!
that damn horses head stuns me every time 👌
Out of all the bullshit in life your outlook and humor makes this chop stick made screen worth looking at. Thanks for the videos peg always looking forward to the next
I'm envious of the heavy equipment you have on your property. The lathe and knowing how to use it. Mucho respect from Trump country.
I did a 4bt swap in my 1964 Dodge W300. I get 20 plus mpg.
These videos are always good for a solid laugh 🤣 makes me wanna find my own rickshaw
There all pita airbag kits at the dump.lmfao. I love this guy
So considering the age of this video... I hope you will see this message. At 23:48 the trailer jack would be hilarious as a peg leg for walking around a car show or a meet & greet.. dumb is funny.
i wouldnt lathe the rotors till i was putting them on so i didnt deal with the rust , as far as calipers there is a hone that princess sells that can clean them up as well as master cylinders... great vid
Just looking at Willard makes me laugh 😂
Hes awesome!
Man, it's gotta suck not being able to have a clean and shiny ride up there. Your one tough dude Peg. Keep givn' er.
Thanks man . That diy brain transplant with willard WAS not a good idea. HA HA HAW.
Here in West Virginia..I torque my wheels with the impact as well
How is the move down south to the states coming along. Hope it happens soon, it would be great to get you here. Lots of scrap yards with only rattlesnakes to deal with and no mud and snow most of the time.
willard is a mint companion
Your Japanes nooky palace on wheels is CHERRY.
Hell yeah dessert 100 and then some zip ties and bias plies
Hey man, I feel you on running the rickshaws, I got a 2000 Nissan Sentra with the dinky little 1.8 liter and a 5 speed, got a glasspack on it to annoy the people around me with fart noises. I can't afford to drive the '93 F150 Flareside I got daily. Fucking gas prices are absurd, hell, it's becoming so valuable rich assholes should wear it as a fashion accessory so we can light them on fire easier.
My trailer licence plate is hooked to a ratchet strap with some zip ties. This makes it easy to add to a trailer (that is tandem axle)
The Willard moments are my fucking favourite they're fucking miiiint
Got to drive the dozer at work, got a new hat, it was payday and Friday, peg posted, today was a good ass day
Just bought an 89 f2shitty with the idi can I send pics of it? Gonna put 35s onher
Mr. Peg. You are a national treasure to the Great North of Albertastan. Wish we had more like you. Don't need to tell ya why. But you mean more to me than a half bred step brother I never had. Stay stewed my brother you'll not get out alive.
Get on the Patreon. So much better "Greased!"
That backing plate on the drum brakes watching you raise the GVWR of the Rickshaw🥴🥴🥴
You are just as good at sarcasm as you are getting rust buckets running. Always reuse cotter pins lol
The edits are a true gift to a fellar
Peg finally learned how to use C.A.D (cardboard aided design)
Thank's Peg for Comic Relief !! Lot's of Bad Stuff Happening lately ! You are a Great Distraction , from the Seriousness of these times ! Bless !!
that vidya was mint.... you should have the Frenchman drive it and rig it to have a spring and tire delete mishap
The front end problems that are going to transition into rear and problems got the shit out of me man thank you fuck
the trailer actually came out really well
The second I saw that Ram shaking itself apart I could not stop laughing
Supposed to be out fiddle fucking with things but instead I find myself watching a fella hobble around for 30 minutes drinking beer and talking to himself
Your exactly right fuel prices are crazy but beer prices are the same lol 🤣 thank god
Hey Peg, keep up the minty vids. But You dont have to worry about taking wheel burins apart to grease them!
Just drill a hole in the cap, install greasy zirk 500 and pump it till plug runs out her backside. Ran dump horsetrailer many times from Nd oil patch to wisco.many times, just giver a few pumps before the trip.
Who gave this man a welder?.. we all know how he I'd with the Cosby sauce for fuck sake 🤣 😂
I lost it at Brandon saying "Timmahh"!!🤣
LGB
LGB
I had a bearing buddy fly off my camper. Cut off the top of a water bottle and gorilla taped it on. Just unscrew the cap and add grease 🤣
Willard may be stunned but he's a handsome guy, and he has all of his legs.
Hell yeah, been waiting patiently on a new ziptie vidya. Good stuff as always
“Wonton Rickshaw” is a great metal band name. 👌🤘
This guy! Makes me laugh non stop, it’d be a pleasure to have a can o Busch with you!
If you buy a bus with a 12v 6bt you get a bonus parts shed.
Road Beers, rev taps next to jonny law, and a whole lot of debauchery.
Good sir- Thought tighten till it strip ... then quarter turn back... thoughts?
Mtfking great. LOVE THIS SHIT👍🏼🇺🇸🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦 live in the great State of North Carolina. Lots of old rigs here. Got my 16 year old watching you. 🇺🇸🇨🇦🇺🇸🇨🇦
the beer in the foot had me laughin like a sassy skool girl lol
the fast and furious cut scene 🤣🤣🤣🤣🤣🤣🤣🤣
It’s a Christmas miracle same as when my 7.3 starts when it’s below 50 degrees outside
The res window lol.