Poor editor… This episode must have been a nightmare to edit the 32,000 clips that make up this video. Everybody loves the Layton team and appreciates the effort and sacrifice to produce enjoyable family friendly entertainment. Thank you everyone. 😁
Hill Billy is a great guy. You can tell he'd teach you even if you had no experience with automotive and not make you feel bad about it. Dude seems super personable.
Robby you have a lot on your plate there . Is anyone else doing everything like what you're doing ? And Matt's not getting to race against you in the New England 900 , Robby that million subscribers looks like it may be coming quickly. So make sure my Charger is ready ✓
Gigi idea- get some bright pink flashing LEDs/Strobe lights (probably cheap ones) and pull them behind the Pacer during burnouts and they could flash light into the smoke, adding more to the effect.
Keep blowing fuse make sure you don't have a short I seen forklift they tighten a bolt and they pinch a wire between the medal so you have a relays for the lights
Your fuel loops will fill with gas [I.e. no vent] you can run the hose up and back down a tube or it just needs to be higher than the tank, you also need a [ball valve ]to seal vent line the if you going to leave fuel in it. The fuel will go flat in just a few days and can cost you a motor [you have to see fumes] Amazon or "fuel hydrometer kit" to check specific gravity you will be shocked if it is low you can bring it back with additives.
On the jeep is the whole axle ment to move left and right when turning from lock to lock if u watch the video. I get its gonna move a little bit but it was moving alot!!, I thought the 4 point arms was ment to stop things like that from happening??
22:38 Yo. Who rides the UNICYCLE ?!!? :: A Red frame with Light red retro BMX rim /wheel, there in the back ground. oR is that thing SCRAP ?? I would LOVE
I don't think I would have any faith in those lower "A" arms at all. They should not have bent on flat ground. You weren't jumping the car. I think you should opt for something stronger.
The best addition to your shop is Sean the guy can build anything
Robby :Layton World ROCKS!! Love the Boss and Littlest Lady Boss with her riddles and jokes, too!
Always good to have a grown up around. Sean is a legend, fantastic team you & Demri have around you
Keep up with the good work love watching you on UA-cam god bless
Thank you for coming all the way out here to Connecticut. It was a pleasure to see the pacer in person. Keep up the good work.
Poor editor… This episode must have been a nightmare to edit the 32,000 clips that make up this video.
Everybody loves the Layton team and appreciates the effort and sacrifice to produce enjoyable family friendly entertainment.
Thank you everyone. 😁
It was a pleasure to meet you Colton and matt at the new England 900
Hill Billy is a great guy. You can tell he'd teach you even if you had no experience with automotive and not make you feel bad about it. Dude seems super personable.
Sean can make and or fix anything ❗️What an amazing guy.
cool episode, the most exciting part was watching Robby's amazing Sharpie skills. 😂
Cool video, Robby Layton Nation! You really got a great team! Catch you on the next. ✌️ 😊
We live one town over and ironically we were in Colorado that weekend! Come back next year!!!!!
Robby your Team is second to none. Working, fixing, testing, tuning, all while talking smack and having a good time. Well done Boys.
Big rush, and a great crew make all the difference! Good job, that Pacer is insane
I am looking forward to seeing the Pacer finished!
Ahh, the good old Robby Layton World! Thanks!
I wonder if those pink headlights might look pretty good in the smoke during a burnout?
You'll see in the next video!
Another productive fun filled video. Y'all keep making it happen
A master fabricator is a key for any shop. Great stuff.
Robby wire up 2 fans in the back windows to suck out the smoke it works
Robby you have a lot on your plate there . Is anyone else doing everything like what you're doing ? And Matt's not getting to race against you in the New England 900 , Robby that million subscribers looks like it may be coming quickly. So make sure my Charger is ready ✓
That Charger will look great in Robby Nation Blue in my driveway. A million is coming Soon ✓
That Jeep is indeed insane! Amazing work getting it ready for the race...💨🚗
I know the movie lines you reference, but, "Terry" don't know it, but it's funny 😂😂
Love you all 😘
Hugs from Nebraska
google 'put it in reverse terry', it's a classic.
@@dronez7884 OH LORD put it in reverse terry
@@warrenmichael918 😆I googled it. Thank you 👍
Can't believe you got the lower A arms fixed and upgraded in time! Well done team!
Great job guys. Thank you 😊
That is indeed insane 🎉
Great job again.
You should put lake pipes on the pacer, it would look awesome.
I have been waiting for this video!! So glad you finally shared with us!!
I have been waiting to share this video with you!!
Trusty needs some TLC. I'd bet there's someone there that could give it a nice paint job.
Cleetus is an expert since he painted the helicopter..
Good job!!!
I watch you ever time u put a new episode you are fun to watch
It was a great day to see you racing at Stafford Springs! I hope it becomes annual here!
Me too
Man good friends and good family what could a guy ever want
Thanks for the video can't wait for the next ones.
Gigi idea- get some bright pink flashing LEDs/Strobe lights (probably cheap ones) and pull them behind the Pacer during burnouts and they could flash light into the smoke, adding more to the effect.
Long way to go to do burn outs ! Thanks for sharing !
Very Nice repair guys
little one with broken arm still givin it good on her!
Thanks for sharing 😀👍
😄😄😄you could sure tell Robbie a wildguy😂😂his woman his don’t let him to far from her atall
Yes .if u want it done weakly or run cameras coltin the man
Keep blowing fuse make sure you don't have a short I seen forklift they tighten a bolt and they pinch a wire between the medal so you have a relays for the lights
I was there and met you on Friday now I vote for you on the onx build
Finally a good use for a Pacer.
THANKS FOR THE GREAT VIDEO
Your fuel loops will fill with gas [I.e. no vent] you can run the hose up and back down a tube or it just needs to be higher than the tank, you also need a [ball valve ]to seal vent line the if you going to leave fuel in it. The fuel will go flat in just a few days and can cost you a motor [you have to see fumes] Amazon or "fuel hydrometer kit" to check specific gravity you will be shocked if it is low you can bring it back with additives.
So, when does the Pacer get painted pink so The Boss can compete in burnouts?
Becuse it’s not the bosses car any more lol
Looks like you landed on runway 22 left in Boston.
You know Paul just built a burnout pad and I can hear it calling your name 😊
Awesome video!
Looks like it's time for the old 9 mm wrech brace for the welding
To brace that spot just ask matt
Dow Corning DC-4 is the best silicone grease for oil filters there is. That is what we use on aircraft.
9:15 yeah he'll believe they said change the oil after every burnout not before😂😂😂
Great crew at layton auto
Sean build some Rub Armor for the 1/4 panels lol
Pacer looks good the math hot tire with smoke plus air. hope it don't add up to equal tires on Fire
HOLY COW!
@9:57... Does Hillbilly have Sasquatch strength? Does he over-tighten oil filters, with his hands??? 😜😜
so much for that nice pink powder coating
Can't wait to see this next video
Good old New England Town
Lookin great.....however.....when is the "BOSS" GONNA START DRIVING " HER" PACER ????
Once it’s safe for her to get behind the wheel of 1,000 hp
Gotta imagine they want all the systems clean first. Although Robbie may panic too
Hi all, hello from South Africa, is that Grumpy in shot?
Demri, buy Gilligan some shorts to wear in public.😂
Low key humble brag 9:56 (me strong)
Awesome video
the skid plate on the control arms need drain holes.
Hope that keeps the lower control arms in one piece.
When are you going to paint the Pacer
When is the Boss starting her burn outs?
20 inch rims on front small on back for better Handling
On the jeep is the whole axle ment to move left and right when turning from lock to lock if u watch the video. I get its gonna move a little bit but it was moving alot!!, I thought the 4 point arms was ment to stop things like that from happening??
It may have been easier to fly into Hartford CT. or TF Green in Providence RI
The internet demands more Demri
22:38 Yo. Who rides the UNICYCLE ?!!? :: A Red frame with Light red retro BMX rim /wheel, there in the back ground. oR is that thing SCRAP ?? I would LOVE
Robby you need a pink race suit & helmet. To go with your pink car.
Put a light in that teardrop hole
Sneaky Robby... A Pacer video disguised as a Deja Blue video!😉
check out 4:01 why does the whole axle move under the truck when jamie turns the wheel back and forth?
The pacer would be a whole lot cooler with a blown amc 401, just saying lol
YOUR LIST ... did you add GAS UP? lol lol
My custom built 69 Charger will also win the race you guys rock
You're not talking about the million subscribers car are you ? Because I have dibs ✓
Robby you need to paint Dig Dug for Tom Tom...
I had planned to do it but Tom decided to have a shop in slc do it!
That suck sucks!!
#4:30 put a corvette style muffler in that monster
But he’s a man magnet in his cute car lol
What was the blown fuse issue
Who is the funny looking weird guy without a hat on? 17:05 stranger danger
More Pacer content, plz. I'd love to see it fill its hot pink potential.
Sean is spending too much time around Hillbilly and Eeyore. He almost dumped that shock on himself and Robby.
When will we see the pacer on the drag strip
I don't think I would have any faith in those lower "A" arms at all. They should not have bent on flat ground. You weren't jumping the car. I think you should opt for something stronger.
@3:54 Robby! Matt won't be happy to see those metric fasteners on that crossbar. 😀
When does the Boss Demri get to do her burnouts? 😮
Why fly into Boston when Bradley airport is so much closer
Because SLC to Boston is cheaper and direct.
❤🎉🎉❤🎉❤ My girls are the same way.They made me go buy each a helmet from harbor freight so they could watch me weld lol 6 and 13 ❤❤❤❤❤❤❤❤❤❤❤❤
Why is it that the oil filter can be tightened by hand and yet need a 3/4 drive impact to remove why can’t all fasteners on a car be like that
Ok…Title says ‘Deja Blue’, but the entire video was the Pacer ??
Paint black and never look back. Just go win the event.
pinkie
👍🏽👍🏽