HIKVISION INTERCOM, DOORBELL & ACCESS CONTROL ALL IN ONE TERMINAL
Вставка
- Опубліковано 11 лис 2024
- Today we take a look at the Hikvision DS-K1T500S all in one terminal. This powerful bit of kit has the doorbell function, intercom function, access control function and supports QR code reading which allows access without issuing a physical card.
We show how you can call the IVMS-4200 software, call the HIK-Connect app and open a door, read a card and a QR code (and everything in between).
This little gem of a product really packs a punch compared to some of its competition.
This video is powered by Seagate Skyhawk.
Further information can be found here: www.dvs.co.uk/
If you found this video useful, please give it a thumbs up and comment down below. Remember to subscribe and turn on notifications for weekly content.
Hi DVS! First of all thank you for the great video regarding the Hikvision DS-K1T500S. At a customers site I have installed a similar DS-K1T501SF terminal. They use the DS-K1T501SF to open a gate with their smartphone and to answer calls from visitors via the Hikconnect app. To use the DS-K1T501SF in connection with the Hikconnect app I installed the special firmware version (V.1.1.0build180801). Since a few days I installed a new DS-7716NI-I4/16P(B) NVR on the site. I want to plug in the DS-K1T501SF to the DS-7716NI-I4/16P(B) NVR.
When the access control terminal is plugged into the NVR, the orginal access control terminal (logically) goes offline in the Hikconnect app and show up in the NVR devices list. In this situation one can record video from the access control terminal but you cant use the gate open function and answer calls from visitors via the Hikconnect app anymore (the lock icon in the Hikconnect app is also gone).
Do you have any advice on how to set up the access control terminal in connection with the NVR?
Thanks in advance!
Hi Mark and thank you for the feedback and also well done on getting this Far. Regards the NVR itself , assuming you want to add the Device to it for video recording purpose correct? Have you installed the latest 4.21.008 firmware on the NVR? Assuming you just want the video or do you want it added in the IOT section as a access device to bring in OSD from the device?? Also are you adding this via the LAN port of the NVR and not the POE port of the NVR ?? , this is also the firmware I use on my Access Terminal also
@@DVSLTD Hi DVS! Thanks for your quick response. Indeed I want to add the access control device to the NVR for video recording purpose. I checked the firmware and its version 4.21.008build190625. I want to add the device to the NVR to record video and somehow still be able to open the gate and answer calls from visitors. On the NVR there is 1 LAN port and 16 POE ports. The LAN port is used to connect with the router. The POE ports are used to plug in several cameras and the access control device. Hope this clears up some questions. Looking forward to hearing from you :)
@@markvanleeuwen104 the access control device needs to be on the network not the nvr, you then need to configure the camera of access control to the nvr via its ip address etc. I have it working this way, you cannot get outbound connections via the nvr ports so it cannot connect anymore.... make sense?
@@jameslewis875 Thanks, I will try it this way
Hi Dave.Congrats to your videos.Wich product of acces control system should I use,if I want to control 3 different doors.Thank you for your answer and Happy New Year!
if you want to connect all 3 doors into the same controller and use our software then please consider the DS-K2604T Access control unit for this purpose , do you need app control ??
The beginning was hilarious 😂. Love this Channel Mr Davies knowledge is incredible.
Aww thanks 😊
hi there. this looks great. Is there any possibility to trigger opening of sliding gate trough NO / NC contacts ? Thank you
Yes sure, on the terminal we have a relay that can be used for that 😊
Great review. A few questions I have;
- how does Face Recognition work? Like QR in front of camera?
- Connected to HikConnect, the app keeps asking for a password when opening the door (annoying). Any idea how to disable?
- Can an external keypad be connected (like DS-K1107EK)
Thanks!
Hi, the Face rec terminals support face rec opening, you have to enrol the face direct to the terminal or via the 4200 software or hik central , when opening the door on the below unit it does ask for password , not found a way around it but not really needed to will take a look
HI, VERY NICE VIDEO AND SYSTEM TOO. DO YOU KNOW A DOOR INTERCOM THAT WHEN THE VISITOR PRESS THE CALL BUTTON TO DIAL A MOBILE NUMBER AND TALK ?
Thank you , actually our intercoms will the call the HIK-Connect app , on the latest intercoms and 4.5 App release it also supports apple call , so when the intercom rings it appears to come through as a phone call
I have a DS-KH8350, how will this unit respond to the doorbell button with no doorbell present? Can you program that the doorbell and call button do the same thing?
And how will HIK-Connect respond?
you can make the doorbell call HIK-Connect / indoor station
@@DVSLTD Please, how do I make the door bell button call the indoor screen? Tried everything and can't figure it out. Only the phone symbol calls the indoor screen.
@@DVSLTD Can you help me please, how can I configure that? I unfortunately found no solution for that.
@DVSLTD great vid as usual David any issues with driving security gates with the relay.
Thank for knowledge. Ive question on option face recognition it can use on this device ?
Hi , and thanks, this devices doesn’t do the Face Rec but we do Face Rec terminals that have this function, like the DS-K1T67 range , 😊
Hello, I see two buttons on the front panel. But visitors will not know which one they must press. They don´t know button´s attribute. Is there posibility in config SW unification functions? For example when visitor press doorbel doorbell rings and in the same time system call to Hik-connect.
Hi and yes I see your point , some put a little plaque next to it to tell the user what to do , but one button can call the indoor station and hik-connect app and the other can call the software
Hy, can u tell me how u configured on hik-connect?
What is the correct firmware used to integrate this device with HIK connect
do you know how to disable it calling to main station when wrong card or fingerprint is scanned?
Hi komle , are you using the Face rec unit? Or this unit? There is a tick box that enables the function to call indoor station when for unknown card , I will take a look at mine and find it
@@DVSLTD I'm Using DS-K1T501SF and right now, when sun is shining (it shines low in winter) to FP reader I get calls. Yesterday I got 31 missed calls.
Hi Dave! Is there any way to modify a ds-kv8102 ip door unit to send 12v to the fail-secure lock LESS than 15 sec. I already trashed one lock as it supports 8 sec max of 12v supply. Thanks
Hi George, under 4200 remote configuration and then access control parameters , I have set it from 15 to 5 and it saved after several times I had to press apply so seemed to work fine
Another great video, The beginning was very funny made me lol. Keep up the good work DVS team
Thank you for watching Steven!
Hi Dave, Can hikvision modular intercome ds-kd8003-ime1 scan qr code (generated in ivms 4200 key card qr code) and open the doors?
How does the face detection work.
Hi , this unit does not have Face Rec like the FR terminal , is that what you want ?
Hi
Can you make a video of the Hikvision DS-K1T501SF Video Access Control Terminal calling to Hikvision DS-KH6320-WTE1 IP Video Intercom Indoors Station please?
When I press the door phone on Hikvision DS-K1T501SF it's calling to IVMS-4200 but I want it calling to the indoor station Hikvision DS-KH6320-WTE1.
Thank you.
Please explain how to take a screenshot on this terminal when reading a card. To the hard drive directory. Already half a year I suffer from the replacement of access cards
Hi , sorry I am a little confused , you want to use this QR code function ? or you want a list of the card numbers?
Great video! This looks like an interesting option but is it possible to record persons at the door to a Synology NAS?
Thanks for the feedback , not tested to synology NAS , it does add to a HIK nvr so you could take the RTSP Stream I guess
Hi
Just moved into an apartment with this system....the indoor monitor station is by the front door....I took it off the wall next apartment to take into the living room so I don't have to keep getting up. But it was connected to an rj45 cable or similar. Can I run it wireless off my router? Thanks for any help
= I took off the wall next to the front door
Hi , yes you can , you will need to power it with 12VDC PSU and then in the configuration menu add this to the wi-fi you have , but it will depend on the system configuration as if the intercom system is not connected to the same network as the wi-fi then the unit will not call when the main door is called , does that make sense?
DVSLTD Thank you so much for your reply....I think I understand sorry but I'm not up on this kind of thing apologies.
If I just leave the indoor station as it is configuration wise i.e don't mess with settings can I just buy the power supply and plug it into the living room electric socket where I sit will it work fully or does it have to be plugged into an rj45 connector too?
Basically I just want to move the indoor station from the front door to the living room.
Thanks for any help you can offer very much appreciated.
@@pbeb3081 Hi phil , the issue is its hard to know the setup there, if your wifi is not on that network , IE its yours and not the shared network with the intercom on then this wont then work , just a thought , does it also call the HIK-Connect app also when someone calls you as you could link the indoor unit to your home wi-fi under configuration and wifi , then add it to the HIK-connect app by downloading the app on the phone ( hik-connect) and then scan the QR code on the back of the unit to add it to your account, this will then ring a smart phone / tablet with the app on and do that where ever you are
@@DVSLTD Hi m8 its making sense now thanks to your explanation thank you, I will be at the apartment today so i will be looking forward to following your instructions regarding the hik connect app and the indoor station etc. That will be perfect if i can get it working like that. I will get back to you later hopefully with good news.
Once again thanks so much for taking the time to reply. Much appreciated m8.
Can I take screenshot when reading a card?
Of the OSD to see the card number?, then yes
do you have a video on how to set up the QR code to unlock this access control unit? I recently purchased one but cant seem to get this function to work
Hi , this video shows how to add and then generate a QR code, the lock relay on the unit itself with then operate to control a door if required
@@DVSLTD I understand how to get the QR code but i cant seem to figure how to set the reader to read the QR to unlock the magnet. Is there settings i need to enable or trigger in the software i need to add to support it?
@@kevinphung6799 Hi Kevin , have you wired the lock from the lock relay on the back ? , also is the dipswitch set for controller or terminal ? it needs to be terminal if standalone , if you need to send me a diagram you can email dave@dvs.co.uk
@@DVSLTD ok i just emailed you the diagram
what is the solution used for the four tvs? And this DeepinMind?
Hi , sorry not sure I understand , the 4 TVS ?? & Deepinmind , do you mean the large video wall you see , then this is my demo facility where equipment is tested
Nice, please help, I have got the DS-K1T500SF everything is working fine with the iVMS4200 but can't get it to work with the HikConnect App (iOS iphone10). when the bell button pressed no notification on the phone. Hikconnect App can see and hear the device.
Hi , to call hik connect you need to press the call button not the bell button 😀
@@DVSLTD
Hi, I need help as I do so that the equipment works at the same time, with the ivms4200 and with the Hik-connect application.
@@edwinojeda8492 Hi , what region are you from
@@DVSLTD Colombia
@@edwinojeda8492 Have you made contact with any HIK rep over their?
Hi there. Many thanks for your video.
It is possible to integrate DS-K1T500S with intercom IP monitors, like DS-KH6320-WTE1 or similar?
Many thanks for your help.
Hey Dave, Nice work always. I know this is a bit old video but I was wondering, when we send a QR to a visitor, is there a way of getting a notification of any kind when he scans the QR on the device so the person intend to visit gets a notification?
Hi , I have tried to get a notification but can’t do it based on single user just all users , still trying to find a workaround
@@DVSLTD I'm sorry could you please explain more? I don't think I completely understand your answer. Does that mean, we can get a notifications for all users when they scan their code? Also if we are getting any kind of a notification, is it via email or via IVMS?
@@isharar1 We can set an event to say “door unlocked” but this would be anyone that has access , past this I am still looking for a workaround for you
Bonjour
Est-ce qu’il est Poe
Merci
Hi thanks for another useful video. Can this terminal work along villa station? I have a 2 button villa gate station and 2 indoor monitors and want to add this has a door station. Is this at all possible?
yes there is special firmware to allow this to talk to the indoor station , you would need to request this via your supplier
Thanks I got the firmware for the monitors and the 501. Added 501 has door station and villa has main door station. It only works for a half hour then stops
@@keenanverrooi6169 Unusual , we have no issue’s with this , are your local in the UK or another country ?
Thanks for the reply I got this all sorted. Next I want to know if I can add the 501 and villa station to 7200 dvr. I have added it but it only displays blank screen.
Hi any support to my last question? Would appreciate a response thank you
I have a question, i tried to add my device on hik-connect, but i have a problem, hik-connect always show me the error "Verify that the device and router are connected" when i try add my device, someone know how can i fix that?
Hi , please check the gateway set in the device is that of the router , and try using 8.8.8.8 as the preferred DNS setting
Hi, with the firmware on hikvisioneurope.com it was not working with hikconnect, I have found another firmware that makes the call to Hikconnect then:
In IOS, when I receive a call, I can speak and open the door.
On Android, when I open the door, it asks me for a 6-digit password, which we have not established.
If we open the video intercom, both in IOS and in Android we cannot get it to work.
Do you know what that password is asking for?
Do you have any firmware that without a monitor, does not ask for this password?
Thanks.
Can this be used with a video intercom indoor station like the DS-KH8301-WT as an alternative to somehting like
DS-KV8X02-IM / DS-KB8112-IM?
Yes , there is special firmware to get it to work with the DS_KH8301-WT
@@DVSLTD thanks for this. Can the DS-K1T500S be used with a Secure Door Access Controller DS-K2M060, reader DS-K1104MK (for keypad functionality outside) at the same time whilst also sending video over Ethernet to an NVR and calls to an indoor station DS-KH8301-WT/DS-KH6310-W and the Hik-Connect app all at the same time?
What PSU would this setup need?
Also would adding a Four door access controller DS-K2604 cause any loss in functionality e.g. video?
The 4 door access controller will be used with 2 internal office doors with keypads. The DS-K1T500S with seperate keypad is for outdoor use.
@@shaks1979 You can add the camera over TCP/IP to the NVR and we can support the secure module
@@DVSLTD Thanks for this. Is it better to use this intercom as a standalone terminal or can I add this as a door to a 4 door controller (DS-K2604) without losing any functionality? I will have only 3 doors connected to the controller otherwise.
@@DVSLTD hi. where i can get this firmware?
Can I use this to work as a door on the dsk2600 Acces controller?
Great
Cringe at the start dude