Це відео не доступне.
Перепрошуємо.
IceBear Maddog 2022 Full Assembly, First Start and Ride Review- BAD QUALITY CONTROL
Вставка
- Опубліковано 3 гру 2021
- My Email For Sponsorship Offers Hungrydansgot2eat@gmail.com
The Official I Fix Shet Facebook page To ask questions and Receive help or just partake in the group activities
www.facebook.c...
PayPal ID Email For Donations If you feel so inclined to support what I do.
Hungrydansgot2eat@gmail.com
My Email For Sponsorship Offers Hungrydansgot2eat@gmail.com
INSTAGRAM
instagram.com/ifixshet?igshid=NzZlODBkYWE4Ng==
The Official I Fix Shet Facebook page
To ask questions and Receive help or just partake in the group activities
facebook.com/groups/631191488517301/?ref=share_group_link
PayPal ID Email For Donations If you feel so inclined to support what I do.
Hungrydansgot2eat@gmail.com
I don’t know about everyone else…but I got the 2023 gen5 150cc and I’ve had ZERO problems with it.
@ 32:37 right at the top of the screwdriver handle there is a hole. The seat flips up and the hole is there so you can put a screwdriver through to adjust idle. When I was young I mounted and balanced thousands of tires. Sometimes you would get one that would wobble bad. If the wobble is bad enough you see it just like that one. Put a chalk make on the tire lined up with the valve stem. Let the air out of the tire and break the bead. Spin the tire 180 degrees on the rim so the chalk mark is opposite the valve stem. Air it back up. Cheap tires can seat funky sometimes due to uhmmmmm China. You can balance tires at home very easily as well.
I got my Maddog Icebear trike and it has been nothing but problems from day 1 & still having issues… Bent axle bolt, bent rear axle mount, chipped paint, missing parts, stripped bolts, missing pegs, tires wobble BAD front & both rears even after balance, Speedo issues, and many more. NO QC at all, I swear it’s like I got scammed unfortunately
Damn. I expect a bit of tightening bolts and stuff but I just wish there was a way to have $1200-$1500 street legal transpo that you don’t have to do THIS to
Change that Chinese oil out right away then again at 300km that’s 187 miles for proper break in mine did great doing that
Yes you got it adjustment of idel screw
Bro enough comments man I know what I'm doing I own a motorcycle and scooter repair shop.... You're acting like I just figured all this stuff out like I'm part of some kind of weird learning curve or something lol I build full size motorcycles for a living this is just a tiny little GY6 scooter with a 139qmb engine on it from China. I'm just putting this together for a friend and then gave it back to him it's not even my scooter I was just helping him put it together and get it started.
Sorry about that I have a slight disability I get over excited about it sorry to bother you take care
@@AllLifethingschannelyt it's all good man but try to congeal all of your comments into one comment instead of multiple comments UA-camrs receive every notification that comes across the board so when we're sitting here at our job our phone is going ding ding ding ding every time somebody messages.
They are junk we got 2 of these in July of 22 new from a dealer a white one and black one . As long as we had them 3 month they were nothing but junk . Always very hard starting . Both needed new back wheels from them bouncing from the get go . One of them after riding for awhile the front brakes would heat up and stop turning . One had a broken speedo , it was fixed twice One had a of and on skipping problem , we owned them 3 months had one towed twice , the dealer ended up . They always started real hard and always needed new spark plugs the dealer always had them for repair . The seats would always creek very noisy and both had non working gas gauges . TOTALLY stay away from these they look cool but are very cheaply made . Everything you found wrong with this one is what we has issues with ours . Plus the edges of the mufflers were real sharp and got a real bad cut on one . The black one always had to be kick started while you were turning it over on the starter to make it fire , like it needed to be turned over faster . It was on its second battery . We have had less then 500 miles on the and they are not worth it . The dealer is selling them for us right now trying to get rid of them
Good, move it's cool that they will help You get your money back.
Thank you bro I was going to buy one 😌
I use valveline 10w40 4stroke engine oil the gear lube
I have a gen one, 150cc , the bolts that hold the motor, I put bike pegs on those, I have a 14 year old daughter that loves riding on it with me..
hope you put oil and gear oil in it cuz the oil they put in is mineral oil and if you run it with it it can seize up
Came home early from work today for the delivery, from drop off to engine start only took 1.5 hrs. Low idle is the only thing i noticed off except that i had to adjust the handle bars cuz i slightly bent the key went i made a right turn. Will play around with it tomorrow after work and see if i notice any other issues.
Mine should arrive some time july 🤞🏼
@@robertorivera3775 i never thought id have so much fun on a moped/motorcycle. Im legit looking for excuses to leave the house and just ride. Such a great feeling!
I love the Ruckus looks and the possibility of winter riding in Quebec but it is illegal here. If as you say the quality control is nad then I guess it should be illegal-the Maddog trike is illegal.
And the reality is it is China's version of a direct copy of the Honda Ruckus so to answer you correctly the answer is yes it should be illegal but nobody has ever been able to control what China does when it comes to stealing of technology and reverse engineering things and producing them for cheaper than the original manufacturer
@@IFixShet Seen a few more reviews and the lights and gas gauge are a common issue. Still I can't help but love it's Ruckus looks-looks cab be decieving.
I bought one last year but it was the first gen. I've had nothing but issues with mine too. Not even a year old and I'm only getting 120 compression. Stator is bad, speedometer stopped working almost immediately. Bummer
I keep trying to tell people to avoid these things man but they just want to think they're driving around a ruckus
only 120? 120 is fine.
Iam going through the same thing bro hope to fix it soon if not iam going to put a G6on it
That rear tire belongs on a piece of agricultural equipment. Look at the shoulders on that tire. It wants to go in a straight line. Many of the better electric scooter tires have rounded shoulders
like a motorcycle. Much more conducive to better handling.
Okay lets be for real most people buy this version because they want to save some money or don't want to start with the 50cc Ruckus, maybe DIY just ain't the way for them. With the cost for the Ruckus Plus the Makeover comes to quite a pretty penny; As someone else commented you do have the option have it Setup before shipping, for an extra charge. I liked Your video because You got the job done!! Just remember in some deals Buyer Beware and if it turns out we can't Replace or Refund, It's Good To Have A Bud Like You on their side to help with the build.
Man 😂I have a 2014 ice bear green dropped to the tits and she got 5000 miles she pops like crazy and truthfully other then the starter I have no complaints 😅
Some of you guys get really lucky off the assembly line a lot of people do not have that same luck
Mine just got here 3 days ago I got it started once but I can't get it to start again my step dad thinks it cld be the battery but the brake lights come on so could it still be the battery?
Pretty much all the new motorcycles that come with two headlights. One has a small running light. But the one looks out. But it’s not. That’s just the high beam. Every one thinks the same. But it’s nkrmal
Except I turned on the high beams and it never came on lol
i get the parts and get a 232cc motor and work with it i really just want the body of the ruckus i would make the whole thing myself
what 232cc motor do you use?
YO..just stopped the vid @ 9:25...and wOW .. Looks like a bent axle ! Not even out the crate. W T🤔
Dude i bought one a little over a month ago and the quality control really is FUUUCKED UP, AND I HAVE THE 150CC MADDOG
How did you resolve the out of round rear wheel? Was it the tire or the rim? Thank you.
Sent the bike back
so i take it the headlights dont turn on unless the scooter is running?
I have one ice bear trike best qmj scooter I've had.
Thank you!!!
Whole sale scooter are all like this lol
I got the same one and now it won’t start I tried to kickstart but not working they always come mess up you have to put your own stuff so it could work like you want it mines is sitting because I have to get a spark plug Walt number spark plug do it take need to no and where can I get one at
I have a 150cc of one of these, I get asked questions about it so often I get tired of answering sometimes , turns heads everywhere I go, I'd recommend one, I put pegs on mine for a passenger, but it's an uncomfortable ride to put a girl on it, that's the main downside of this bike, can't put a girl on it comfortably
😆. it's a fkng scooter dude . women belong on them by themselves not with you
what oil and gear oil should i use to change? i got 2021 GEN 1 maddog plus when i start it , the bike is going high rev and low speed up to 15 to 20 mph
Sae 80/90 gear, Valvoline 4-stroke motorcycle oil 10w40 engine oil synthetic or semi synthetic. Remember when doing your oil change that it only takes 3/4 of a quart of oil
The 50cc version is just not very fast I think this top speed we've gotten was like 25 mph for whatever reason the 50cc version is just as slow as dirt. You can remove three of the rollers to get a higher RPM band if you want to out of the variator you may gain a little top speed but it will work the engine pretty hard
Does the engine need to be running in order for the headlights to go on?
Yes
Looks nice. Any problem now with your scooter or she's a babe now still?
This is not my scooter I was putting it together for a friend Just thought I'd make a video of how to set it up install everything and so on and so forth
@@IFixShet cool. Any advice? I have someone wanting to sell me one fir $400 and looks hardly used but said no document of scooter that a friend gave it to him and also doesn't have a kicker. Should I buy it or run away? Plus what's maddog kicker
So, was the problem a bent rim or tire problem?
Tire
Is 75 w 90
You still doing the beep 2 stuff? Any chance you could direct me to a charger for the controller and battery? Came across a used drone buy no charger. Just the cable that plus into the controller.
John unfortunately at this point I don't tell anyone to purchase the Bebop because parent doesn't support it anymore and the parts are getting very expensive to find and anybody that has them is not letting them go you may as well just not purchase the Drone brother
You're falling into a lost cause drone
@@IFixShet ok was just asking I still have my magic air. Got this one for free. Lol
@@IFixShet perfect thanks.
Let's talk about the headliner in your vehicle...
I know isn't it awesome! It even has led's underneath it so it looks like a lightning storm at night when they flicker 😉
Let's talk about the fact that the 20 year old worktruck that probably will never get a new headliner 🤣 You're welcome internet
No More Videos from the parts truck that head liner makes a terrible Background, looks like it's ready to drop at any moment.
Isn't it amazing I pull them down in all my cars cause I love the plume effect. You know you like it just admit it you want me to come over and do the same thing to your car for you
I've never seen a something so simple made so hard
Yawnn.... what a waste of a comment and time considering time is all we have as humans to actually spend because it's something we don't get back.
I have the same Maddog but it’s a 2021 50cc I need it faster how do I do that?
Hoooley f*ck-that tire is full out of whack, lights look weak and no fuel gauge-straight out of the box!
It's crazy how the quality control is just so crap on these things
@@IFixShet Chuckus-poor copy of Ruckus.
Hi is the bike heavy to ride?
Nope
Why get something if you don't like it when I bought my bike I loved it en i still love it guys my opinion don't get something if you don't like it
I guess you missed the part about my friend bought this and dropped it off at my house to put it together for him.....
I just ordered one 85% together, should I call and pay the extra $300 to have it fully assembled??
I will say it's a pain in the butt to assemble it's really up to you and how much time you want to spend getting it all set up primed getting the engine going all that kind of stuff you have to ask yourself what your time is worth
@@IFixShet Thank you for responding!! I called then and paid the extra to have it fully assembled LOL
@@saharabean772 is it all good now, I wanna get one so bad
@@IFixShet Where did you order? I plan on replaing all bolts, along with fuel pump and sensor. Eventually going big bore 171cc. How is yours?
It’s a Honda ruckus that’s why you had issues bud
Too bad you didn't pay attention and actually read that it's a maddog scooter so Honda ruckus clone. It's not a true Honda ruckus. But those vacuum fuel pumps are garbage. I bought an electric fuel pump to fix the fuel pump issue.
Don't they make adapters for the mirror threads?
Yes
When are we getting a update video
You're not I put this together for a friend who dropped it off at my house
@@IFixShet at 4:25 you said there would be a update video.
@@dajiban9325 except there wasn't because he decided to fix the rest of it himself and deal with the manufacturer
What is the price on that scooter icebear maddog
I believe he paid roughly $1,500
And there's your answer
i got 2 of these engines .
but i own 3 Honda ch 80 elite . engine swap on one for sure
Where is your bike shop located?
Temple Terrace Florida
Does the 150cc of this model require a class m1 license to drive on the road or just a valid license
In most states anything over 50cc requires a m1 license, check your local laws. A simple Google search.
@@pkeaton1 ,I did ty,I'll go take it on my 50cc,then when I pass,I'll upgrade to a 150cc, then maybe a 200
I was hoping you show battery assembly in details
Just take all the screws off around the head unit and the battery slides right in
this is the 1st gen maddog , too many provlems stick to the gen 4 or 5
Do the Gen 4 and Gen 5 models have less problems? I'm thinking about buying the Gen 4 model.
@@chris135x They are better but you should def do a carb upgrade and the headlight seems to dim depending on the throttle. apart from that no problems with my Gen 5.
Where did you order from
I did not order this it was ordered from my friend and dropped off at my house
can I use these comments to ask you some advice for my maddog?
Ask away
@@IFixShet okay so I got the same bike! assembled it and out of the box, the running lights dont work and neither does the start button! all the signals and horn are working great! any insight? thanks so much for replying btw!
@@hudson.5940 try squeezing both brakes before you try to start it
@@IFixShet will try and report back!
@@IFixShet YOU ARE A GOD
Got hit. Bars move. Can see why. You have a Facebook? I’ll pay for help. Or I’ll hurt myself
How did you manage to get the fuel pump started?
Prime the scooter with starter fluid once the scooter starts it will start pulling fuel Because it's a compression based Fuel system or a pet cock driven which is vacuum drive. Don't forget to drop me alike and subscribe that's why I make these videos and answer questions to help it's your way of giving back to me
I ended up getting it started but now it’s not staying started
@@spikecurtis1981 sounds like you have carburetor problems
@@IFixShet any solutions?
@@spikecurtis1981 my suggestion replace your carburetor cuz it sounds like it has vacuum problems
Sounds like was made by husbsan😂😂 just kidding but thought you get a laugh out of that
That's actually a good representation
you wish it was made by Hatsan . bet
Yikes, looks good but what a bunch of problems.
Definitely not Japanese quality that's for sure
Seems like they sent you the rejected one.
You would be lucky to get a half way decent one lol
Too much for too little. Maybe not this model type but with 1500 you can ride assembled & spanking new , in any of the many Scooter Shops in Miami. Any gliches & you know where to go. Shit just thrown in a box, just aint right.
@Savage Facts what’s the brand name or is it all custom?
@Savage Facts thank you
is that a 49cc?
Yes
It not oil
Chinese crap-o-la.why spend this kind of money to have shorted parts, immediately have to repair a throttle cable, have included parts that don't fit or work properly and then says it has been through quality control.
Lastly to find out that the rear rim is out of round and a replacement if they don't just send you another piece of crap rim, will cost you another $300. Wow, buy a Honda Ruckus, a fat wheel &and Tire, a rear frame stretch, and a new brake cable and it will avoid all the headaches and last 10 years or more.
Lol well don’t get me wrong all the Chinese GY6 scooters are crap I have a Taotao scooter but if you buy aftermarket parts you can make it into something I’m the second owner and I believe that if you put quality parts in his bikes they’re better than the Japanese bikes well the Taotao scooters is I don’t know about the ruckus is they seem like a real waste of money ruckus is but of course these Chinese bikes are going to be crap at first you’re spinning only 1000 and if you’re buying them on craigslist or Facebook marketing you’re only spending 400 or 200 the fraction of what the original owner bought for it and you only paying that much money for it upfront to pay off the workers and the people that are shipping it to you but I believe they’re worth the money if you pay it from the original owner because you’re only spending $200 on it I’d rather buy them used in brain speaking do if you ask me
And because it saves you the headache and even though your bike might still fall apart every now and then once you get it from the original owner you only have to do simple repairs and replacing a lot of parts for quality parts not like something like with this guy had to went through 😂 lol
Why dont you fix the Roof Lining in your car BRO ????🤣🤣🤣🤣
Because it's just a work truck...BRO
Never run them with the oil they come with Chinese oil isn't worth shit plus the vacuum and fuel lines as the Chinese rubber also sucks