RIDE OUT TO ZEPHYRHILLS MOTORCYCLE SHOW- TAKE HOME 1ST PLACE!
Вставка
- Опубліковано 17 вер 2018
- THANK YOU FOR WATCHING THE BURNOUTBOBBY UA-cam CHANNEL. BE SURE TO SUBSCRIBE AND CHECK OUT MY IG @THEREALBURNOUTBOBBY.
MET UP WITH A BUNCH OF PEOPLE AND ROLLED INTO THE Z HILLS MOTORCYCLE SHOW. ENDED UP TAKING FIRST PLACE IN METRIC BIKES. - Авто та транспорт
Awesome vid
That trike is crazy nice!! I've been thinking about building one myself. Is there anywhere I can get more info on parts, etc. to build one like this?
A lot of it is custom since most of the ruckus parts don’t line up perfectly
Congrats bro! Get that speed test done now...lol.
Your a true homie for not leaving a man behind, much respect 💯💪👏
Awesome dude wish I was riding with you all 49cc Ruckus rocks
It's so weird watching motovlogs where i know all the roads. 😆.
What will the 232 tride do 39.4 mph ?
What is the skinny on that green trike?
Squad goals! Well done dude
"the other place is too expensive" killed me bro! By the way what bars are you running? Those are siiiiiick!!!
Congrats man! 🤙🏼
That trike looks fun to ride. How well does it take turns?
Small Bore & Two Wheels not sure
Better than you would think. Not 100% sure on his. But i have the icebear mojo 50cc fully built out (52mm stroker kit) i like to think of it as a "crx" of scooters lol. You do have to take turns slower than you would on 2wheels but once you get use to getting 1 wheel up its easy
@@burnoutbobby Hey do you guys get together in davenport fl
Nice video bro
September 8th 2019. Almost a year.
Enjoying the ruckus vids.
Congrats.
Is this the same bike you put the a1 cam in. I have one but looking for before and after video with stock internals other than cam.
Edit: was wondering if it ran ok stock or needed a tune (carb rejet) and if you felt more power at lower rpm's. Any info would be so appreciated 🤘
This one is the a12 came and didn’t need much tuning after.
@@burnoutbobby awesome ty 😎🤘
Nice scooters I'm 70 years old and from Dade City Fl now live in North Florida just south of Live Oak Fl. I sold cars for Rays used cars for 4 years back in 1999-2003 Now I have a hobby of buying older scooters and fixing them up.
That’s awesome! It’s a fun hobby with these scooters.
Coney Island Zhills great place.
Where did you get handle bars?
The ruck shop. They are discontinued now.
I just ordered one cant wait tell I get it
Congrats!
Do you have any idea where the guy purchased his back wheels for his trike
They are wire wheels, look up the name and place size of tire/wheel
What bar set up are you running? Don’t see that on the ruckshop page.
Joe SALADINO they were called the trs ultimate handlebars. We discontinued them. I love them but they weren’t cheap. I think like $325
If you happen to find a set behind some shelves...be sure to hit me up bro...they are clean looking.
Joe SALADINO I see people sell them once and a while. Just saw someone trade a set for tools. They are rare but out there.
Hey how is the A9 doing? Thanks
Should do a top speed run today. I wasn’t able to ride for the last four weeks and now I’m able to.
How fast where you going?
Manuel Betancourt maybe 45. Stayed behind to make sure the 49cc guys weren’t left behind
Have you guys heard about a fix for the wobbling on the Maddog trikes? Seems like a lot of folks have issues.
I have not. Even the trike in the video has a bad wobble and his has been built from the bottom up twice with different parts.
@@burnoutbobby well shit! Lol. If I find a cure I'll let you know.
@cartsquads47 thanks I’ll relay it to my buddy
I wanna know how he got those wire wheels on there
Had some custom hubs made.
Did the 49cc guy make it to the show?
Elysium yeah he did he was behind me at the light when we pulled in
Great job on the Wind what is the guy's name or Instagram or UA-cam with three-wheel gold candy
I think his ig is fat boy slim
Where is your shop located I want you to work on my ruckus
We are in Florida but we don’t work on bikes there. We only make and sell the parts.
what`s up bro im in Birmingham Alabama and none of the moped shops or scooter stores even know what im talking about when I ask about a rukus trike or maddog trike where can I find or order me one from please help me with this information bro please
You can get them from Cajun Maddog. Give them a call. Honda does not make a ruckus trike only the clones make a trike so that is the place to get it.
1,000 thanks my bro
How can I find ride-outs? I would like to participate in them. I am in South Alabama.
Florida ruckus riders on Facebook. Get into the group and you’ll see the rides he have here.
@@burnoutbobby thank you
I wanna see some Mini Cooper videos
You don't have a speedometer?
Manuel Betancourt no I just stick with traffic. It does 70
Rick can I buy one of those in Florida?
Yes
全部のマシンがかっこいい！
Watch out the police will pull you over for doing 30 in a 45.
what better 93 fuel or non- Ethanol fuel for Honda Ruckus?
If you ride it a lot I like 93. If you only ride it once and a while then non ethanol
@@burnoutbobby Thanks I ride back roads but not days rain & snow.
Use Seafoam to keep the build up issue from not being a issue.
Just non ethanol. You don't run high enough compression to make use of the 93
It really doesn’t matter to be honest. They all run the same on the wideband when tuning.
Say bro I just bought the g4 I want it a little faster hit me up some time
What’s the top speed
Of what
🤘🍻🤘
Yo next time show the Gas pump and how much it cost you and how much fuel it takes
1 gallon so like $3
What size spokes are on the trike?
Not sure his bike has been off the road for a while now. He got rid of those wheels
The stock size is 10in but i want to say they was 15s not 100% sure
Check him out at gy6 trikes a Facebook group.
13 inch wire wheels
@@miguel360kmc stock wheels are 14s
Are those Toys ?
No
That trike was juiced
Finally someone called you out on the paleness! Haha
Levi Alexander it will never change lol
Lol it's that up north blood brother! Cant tan for nothin!
Also, now I wanna build a grom.
@@leviathanlives5016 must try and be less white, 😅
うおートライクズーマーめちゃくちゃcool
何処のメーカーのトライクキットなんだろ
Are you from fl?
Yes
@@burnoutbobby awesome, me to
Im doing a 150cc chuckus build
That’s awesome!
more info on that trike?
Like?
how can i build one without buying a chuckus trike?
It will be custom if it’s not a chuckus. You will have to fabricate it all. That’s a clone in the video.
Is this the 50cc or 150cc
150
Thanks
I live out in the country I want one so bad but I have no where to ride it I’m looking at getting a Honda 400ex though
Feel sorry for the guy with the 50.
Only 93ron? In the UK they have 99 !!
It's not the same stuff
AHH! I CAN"T WATCH THIS!
You don’t have to but you keep commenting. Can’t win them all
That Tr! K3 is d🔥pe AF.
Jealous!!
That trike needs a engine swap. But is it all hobbies or are people just getting these toys on the side
ThePotatoIsAStarchyTuberousCropFromThePerennialSolanumTuberosumOfTheNightshadeFamilyLOL these are just side toys. He has a $3k motor in it
Yeah what he said. That trike has a sick motor swap in it already it was a 50cc icebear maddog trike
1st! Hahaha
KDDESIGNS my man! Hahah
I'm interested in getting something like the green trike. Any way to reach out to him?
On buying his or getting a Chinese clone like his?
@@burnoutbobby it looks like a custom build with the wide rear tires. I guess I'm looking for the clone
@MiamiExoticCars so it’s just an icebear maddog clone trike 150cc. Then you will get custom 12x8 wheels.
@@burnoutbobbyyou should put links on your UA-cam video to your website. I think I will invest in a mad dog trike and learn how to update. Seems the only place you can buy a mad dog trike for a reasonable deal is in Texas. Looks like a million dollar business to buy maddogs, update, customize and sell. Because I'm jamaican-american I would customized with the American flag in the front, blended with the Jamaican flag in the back. Trikes are better for the mature buyer because it's easy to get a three-wheel motorcycle endorsement. Blending flags and colors will appeal to everyone.
@MiamiExoticCars I don’t have a website and the company I work for does not make parts for the maddog since it doesn’t fit. The issue with those bikes is the harness are poorly made and the welds on the bike tend to crack when riding so just a heads up for safety!
I got one but it keeps stalling... 2020 daix trike; 50cc upgraded to 150cc top speed still 25mph and it stalls... Anyone got ideas?
Air fuel could be off.
@@burnoutbobby it was I have a 86 jet now going to put in 90 next.. Keihin carb in there now, flat surface 20-22 mph down hill 27mph so I'm thinking if the 90 doesn't help upgrade to a 150cc ...I just wish to flow with traffic especially going the over pass...I hate delaying trucks trying to get on the highway because my slow ars lol...thank you for the comment much appreciated
What size carb is on the 150
@@burnoutbobby didn't do a 150 yet I have a 50cc Keihin carb I changed the stock 50cc carb
ua-cam.com/video/llaWTNbWFJ8/v-deo.html
WOW 232 cc huge power NOT.
It’s more than you’d expect on a scooter little guy.
tevatir motor
Tell that clown to ditch the Raiders flag and start repping the Niners 😆
Hahah I think he got rid of the bike all together. But I believe that didn’t change his fan status.
What is this even mopad beat him
More of the show less of the ride.
That was about 3 years ago. Little late lol