How To Remove Power steering Pump On 2003-2007 Honda Accord V6
Вставка
- Опубліковано 29 сер 2024
- you can buy the pump here for $84.99 with free shipping here:
amzn.to/2KZTVz9
if you don't have Amazon, get a free 30 day trial and free shipping here:
amzn.to/2S4Aaeo
Please subscribe!
If this video helped you fix your problem and save some bucks, then support our channel! Any size donations are welcome!!! Its simple and quick just click the link and select amount.
www.paypal.me/...
Or check my store here:
/ @garageboys
Don’t miss the chance to be a proud supporter of a good cause!
-------------------------------------
This video will show you the best and easiest way to remove/replace the power steering pump on a 2003, 2004, 2005, 2006 and 2007 Honda accord V6 3.0 engine
03, 04, 05, 06, 07
for Business inquiries email me at: Garageboys281@gmail.com
Disclaimer: Due to factors beyond the control of GarageBoys, I cannot guarantee against improper use or unauthorized modifications of this information. GarageBoys assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GarageBoys recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GarageBoys, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GarageBoys.
WARNING! Use HONDA manufacturers Power Steering Fluid...Only! You will feel a lot more comfortable in the future just so you would not have any Other complications down the road with your HONDA. if your the type like to experiment...go ahead, feel free
I would prefer to experiment.
What you said. I just did this job a few years ago on my sisters accord, she topped it off at some point with the wrong stuff and it instantly started whining and grinding. Now I get to do it all again tomorrow. Fun times. I think Im gonna super glue the cap on this time.
For my 05 V6, I'd like to suggest to those that are trying it out for the first time to take the pulley off: NO IMPACT DRILL, NO PROBLEM!
*BEFORE* TAKING OFF THE BELT, HOLD THE PULLEY STURDY WITH ONE HAND SO IT DOESN'T MOVE
GRAB A *SIZE 19 WRENCH* TO LOOSEN THAT PULLEY BOLT SO YOU CAN HAND TURN IT LATER WHEN ITS OFF
WHEN REINSTALLING:
HAND TIGHTEN BOLT AND PUT THE BELT BACK ON PULLEY WITH BOTH SCREWS IN
GRAB THE WRENCH AND HOLD BELT AND PULLEY AGAIN BUT TIGHTEN IT TO SAME TIGHTNESS AS BEFORE
YW
Nice job. I knew I could do it, but watching you do it has given me the confidence to do it even sooner. Thanks for the video.
Glad I was able to help! Let us know how it goes :-)
Great video, you are a natural teacher
I’m glad to stumble upon this video help me out a lot got my wife’s 06 Honda accord up and running. Y’all got my sub
Great video. Doing this job for the second time on a '06 tomorrow. Thanks for the quick and detailed refresher.
Glad I could help, if you can like and subscribe 😃
Thank you so much for this video.
The pulley comes off of unit easily with an impact. No need to brace. It came right off. After install my steering wheel was tight for a few minutes. Had to work the wheel back and forth until the pump engaged and sucked fluid in. Then I filled to needed level.
Thanks!
i have replaced "O" ring cost me $2.75 from Honda dealership and that fixed the noisy Power steering.
If you don't have an impact gun you can still remove the pulley bolt. Get a piece of long 2×4 lumber , place the old steering pump on it, drill two holes in the wood where 2 holes to mount the steering pump are. Then get two long bolts with wing nuts and secure the pump to the wood. Then drill a hole on the pump directly underneath the pulley, then stick a old drill bit ,or a screwdriver in the hole you just drilled. This will be used to jam the pulley from moving. Then get a 19mm socket with breaker bar and unscrew the pulley bolt. To fasted the pulley to the New pump, you take the same steps above just don't drill a hole in your new pump, you will need to get a screwdriver and jam the pulley from moving.
By the way, for the 2007 3.0 V6. Possible you guys can do the FULL engine rubberized mount Fr/Rr replace on these sedans??? Because, they are known to go out. Especially the front hydraulic filled engine mount. The rear automatic on these, in my opinion is NOT the best design and they tend to wear out. It is always good to check on these. So with that said, hope you guys can provide a video. Thanks in advance!
On my 04 Accord EX V6 Sedan 88,700 miles. Im try the TSB again with new o-ring. Good to know as well the Pump can be removed. Without having to remove the side engine mount Bracket its says and shows in Factory service manual. To do that dont understand why.
Thanks! Do you think a hissing noise would come from the power steering pump? The noise stops the moment I slightly turn the steering wheel..
Great job!
Appreciate the help!!
Power steering pump rack you got a video on that bro. 2006 Honda Accord sedan.
Thanks your the man
I would love if you guys showed the complete process (properly putting it back together again as well). We just want to make sure that the tension of the belt would not be an issue once everything is put back together again. Is there something special that needs to happen in relation to the belt tension.
We tried to make the video as short and straight to the point as possible, you don’t have to do anything special just put everything back the way it was removed
If your tensioner is working properly then it should spring itself back into place after you put the belt back on the pump and removed your ratchet from the tensioner pulley. No extra work is needed to set the tension as it should already do that once the belt is on. The tensioner is spring loaded so all you have to do to remove and replace belts is move the pulley forward and back with your ratchet. But do so carefully so your tool doesn't go flying off.
Any idea what the torque specs are for the bolts? Thanks..
Mine goes from power steeribg to manual and it whines alot been looking for a leak but starting to think its the pump got 215XXX ON the clock but thinking of doing the pump on my own since seeing it being this easy
At 2:25 do you by chance know the exact part number for replacement bolts? I know it’s a 10mm, my bolts broke and put some 10mm I had laying around but the pump keeps popping off. Any ideas would be great thank you!
I'm still in the process of finding out if I need to replace my PS, its hard to turn and it doesn't make any noise as I seen many do, could there be anything wrong that's a quick fix because I really don't want to spend a lot if i dont have to
You can check the fluid and if you see it’s really dirty and black and you can flush the system and add new Honda power steering fluid
I’m currently getting my power steering pressure hose replaced and was wondering if that hose in the video was an aftermarket
Not sure because that’s how I got the vehicle...
Was there a video made on how to install after taking a bad one out? Thank you!
It’s the same process but in reverse
@@GarageBoys just a few little things, like clamping the PS line as to not lose fluid, etc...
Mdx 06 power steering squeaks when I turn it on in the morning hose connect to the container and the pump both sides have fluid on them what advise can you give me ?
Sounds like it was low in fluid and they probably added regular power steering not Acura power steering (yes Acura and Honda have their own power steering fluid) very common mistake and that will mess up your pump. Advice will be flush fluids and add Acura power steering and fix leaks, probably replace hose or bracket. Fun fact - power steering will leak right on your alternator and mess it up! So fix the leak soon before it takes your alternator...
Does this also work on a 2008 Honda Accord ex? 6 cyl as well
Yes it should
can you list the part number for the replacement pump?
tjc403 part # is 40359829 just make sure you have the 3.0 engine and subscribe and check our Honda playlist for more fixes
I guess you can but I did the job in 15min. and the mount didn't reply bothered me
Did you purchase the power steering pump without the pulley? I cannot find a website selling a PS pump for a 2008 accord 3.5L that comes with the pulley!
Some places will sell them with it but most won’t. You can always use your old one, you just have Remove it by holding it steady and turning the nut.
Garage Boys Do you know where I can find one that comes with a pulley? Would prefer not risking any damage by having to remove my pulley
Usually local stores will have it. But go on amazon buy the pump and buy the pulley, I think it’s like $17, and put them together yourself 😉
Garage Boys Sounds like a plan, appreciate the help!!!
heres a link for the pulley that will fit a 03-07 Honda accord 3.0 V6
link: amzn.to/2QGSTii
I have the same car as you.
Mine is 2005
Can you replace mine to?
How do I get the old pulley off the pump to put it on the new one ?
You have to hold the pump in place and turn the nut in the middle
I got power steering pump from AutoZone then I comes with "pink fluid" inside. but the fluid from Honda is clear like olive oil . Is that normal ??? Should I take the pink fluid out??
No don’t take it out but it’s fine if you did already. Just make sure you add “Honda power steering” fluid and you will be fine
the only place that sells compatible honda power steering fluid is the dealership. for the other honda fluids, some matter and some don't. you can use any brand that is compatible for motor oil (i.e. 5w20 synthetic). any synthetic brake fluid, you can use any japanese spec radiator fluid (honda, nissan, toyota, or zerex brand "asian coolant") however, honda is different from other asian manufacturers for power steering fluid. you must buy the honda brand stuff from the dealership. other brands like subaru or toyota actually used undyed dextron transmission fluid for the power steering, you can use regular transmission fluid that is dyed red from the autoparts store for those vehicles.
25 mins for you 2.5 hours for me.
Ur scaring me. Why did it take so long😂 I have a ps pump and belt tensioner replacement coming up Friday and I was thinking it would be a quick job🥶
u are totally cheating viewers when u tell them what to do, then u magically pause your video, then somehow/someway, u show the nut/bolt/connection/whatever, just magically disconnected! #lame You also forgot to show anything regarding the MOST IMPORTANT step of the procedure, which would be to siphon out all the old PS fluid, and flushing/filling ONLY with Honda fluid?! PS...are low pressure PS line bolts size 10 or something else? LOL
If I show you how I turn to remove every single bolt the video will easily be 10 minutes longer, I show the viewer what bolt to remove and what size it is, I assume the viewer know how to remove a bolt. If not then you can search on UA-cam how to turn and remove a bolt and then come back. All my videos are quick and straight to the point because I know my viewers are busy doing the labor and don’t want to spend time watching a long video while their hands are greasy
Theyre doing it for our benefit,not everyone has time to watch a full 3 hour long job...
If you decide to it yourself let me know when, so that I can hold your hand.