2003-2007 Honda Accord Power Steering pump remove and install
Вставка
- Опубліковано 13 сер 2014
- 2006 Honda Accord P/S pump replacement
Tools:
amzn.to/2awcRDO 3/8 ratchet
amzn.to/2aYXnIy 3/8 10mm deep socket
amzn.to/2bhlB64 3/8 12mm deep socket
amzn.to/2b5u8I2 Hose clamp
amzn.to/2aweq4t Pliers
amzn.to/2aCSvZa Rags
Parts:
amzn.to/3HFLu9M Power steering pump for 4 cylinder ONLY
High pressure hose gasket
Torque specs:
amzn.to/2aDZqER 3/8 Torque wrench
8 ft. lbs - P/S high pressure hose bolt
16 ft. lbs - P/S pump bolts
47 ft. lbs - P/S pump pulley bolt
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzaboutbolts1
and SUBSCRIBE!
bit.ly/NutzAboutBolts2 - Авто та транспорт
The video quality of your videos still hold up. This video eight years old and still looks better than most new ones.
Thanks! 😁
This video alongside the auto tensioner pulley video has saved me countless hours this afternoon trying to figure it out on my own. I've bookmarked them all for future reference. Absolute legend 😁
Love how you walked through the video easily and fluidly. Great Job!
Thanks
nice and clean job dude, having the right tools makes the job easier, thank you for this video
+Luis Jaramillo thanks!
how much would a job like this pay? I have the same problem and want to pay someone to do this for me. How much should I charge him?
@@followthewhiterabbit8561 100 to 150 USD would be fair.
Ain't hardly ever seen an engine that clean...!!!
Seriously, i nearly choked seeing this one compared to mine!!
@@timbrown1803 u can eat of that engine!!
You did a great job. Love how clean you work and your clear explanation of tools and specifications.
+buzztrucker thanks :) if I wasn't a mechanic, I would want people to lay out all the info so I know what to do as well.
Came here to comment the exact same thing. Straight forward video on what to do.
Great video! My moms pump just went bad and needs replacing. I'm glad it's as straightforward as anticipated. Thank you and excellent care shown working on the car. Loads of tips for staying clean, both the car and the garage! Very much appreciated!!
+Andrew Stewart thanks, the only other thing you need to do is to remove the pulley from the PS pump since the new one's don't come with the pulleys attached.
Thanks!
Yet again, a big thank you guys. Replaced my p/s pump using video. I especially appreciate the torque specs, Keep the Accord videos going. 👍
thx!
This is a great video and I wish you lived next door to me. Thanks for posting!
For my 05 V6, I'd like to suggest to those that are trying it out for the first time to take the pulley off: NO IMPACT DRILL, NO PROBLEM!
*BEFORE* TAKING OFF THE BELT, HOLD THE PULLEY STURDY WITH ONE HAND SO IT DOESN'T MOVE
GRAB A *SIZE 19 WRENCH* TO LOOSEN THAT PULLEY BOLT SO YOU CAN HAND TURN IT LATER WHEN ITS OFF
WHEN REINSTALLING:
HAND TIGHTEN BOLT AND PUT THE BELT BACK ON PULLEY WITH BOTH SCREWS IN
GRAB THE WRENCH AND HOLD BELT AND PULLEY AGAIN BUT TIGHTEN IT TO SAME TIGHTNESS AS BEFORE
YW
Thank you!
Definitely good tip! Protecting the threads too!
That's the best diy video i ever watched! Thank you guys.
tom fong thank you for your kind compliment. :)
Great video, my only question is how do you bleed the system?
Nice that it sits up top, makes the job a lot easier. Last week I replaced ac compressor on my son's 2003 Accord and was very difficult due to tight space around lower bolts. A week later and his power steering pump has failed, is making one hell of a clattering sound, I reckon the extra tension from the new serpentine belt probably resulted in it giving up the ghost.
Muchas gracias! Te felicito por ese motor tan limpio!
Worked out great thanks! 12inch=1pound of foot torque ppl!
Got a 2007 acura tsx, looks like the same exact engine. Replaced the o ring on the suction side hose clamp mount, but that did not fix the leak. Its leaking at the seam on the pump right below the suction hose mount. As soon as I start it starts to leak. Gonna try a rebuild kit first, since its probably the seals are worn and causing the leak.
Good video. Thanks.
rebelrob how did that go?
Cleanest engine bay I've seen in one of these Accords
This engine has almost 35 miles on it, he should replace the timing belt as well.
@@Obelisk57 this car has a timing chain no belt
That's because he was pulling a brand-new part off and putting it right back on that's why I had fluid still in it also probably why he didn't show anybody how to remove and replace the pulley
Excellent video man. HQ stuff makes him even better. Thanks for sharing.
Cesar Galan np! thanks for watching!
Great video! Nice touch on the special hose clamp pliers, too. I've been tinkering with cars for 30+ years and never heard of them. thanks!
Stan Davis thanks!
Thank you for the tutorial you helped me out.
Great explanation, thank you so much!
Thanks guys, great video. Replaced my wife's ps pump in about 30 min, works great. Super clear instructions helped a bunch.
Mr.Studzdog nice!
Thank you for the excellent tutorial.
Wow! This is an excellent quality video! Thank you very much.
you're welcome :)
Sadly, the pulley removal, priming and bleeding the pump was not included.
Yea this had me lost for a bit. Idk anything about cars
Yep, that and transferring the pulley wheel.
wow its right there on top of the engine bay.. amazing
Bro my accord is gonna need some TLC. Just starting this vid and seeing how clean your bay is has me envious
You too can do it, we post a video on how to clean your engine bay 👍🏼
@@NutzAboutBolts I gotta check it out! Thank you 🙏
Your the best BRO, thanks
thanks I saved $$ doing this myself thanks to ur video
+lvitela24 no problem! Glad we could help :)
Very helpful video. Thank you.
Going to do this the weekend
Wow, you sir, are gentleman and scholar. You're helping a lot of people by taking the time and effort to create these videos. Thank you. Two questions, is there anyway to get around bleeding the PS once the new pump has been installed? Also, should one fill the new pump with PS fluid before installing?
+Matt Warren I think the new p/s should be filled with fluids in them when you buy it brand new. Just do a flush and it should be fine.
Congrats, great videos, but, can't find how to replace high pressure power steering line in 2006 honda accord, please make a video to elxplain, thanks. regards from México.
Fantastic video.
Niiiiiice! …is it the same mechanism for the 3.5 V6 Accord?
Great Video, My Honda crv 2008 has a major leak from the power steering, thus i have to refill it almost every day.
Justin Rube Jr. make sure its not the high pressure power steering hose o-ring that is inside. The V6 engine on the Honda accord has problems with those.
You are awesome. :) I watched this and the serpentine belt video, got the tools and parts, and did it. :)
I'd agree with others about how it'd be good if the pully process was in there - the parts I saw online all came without the pulley, so I had to switch that. Easy enough, but if there's an easy way to get it loose without a bench vise, I've be interested in learning it. Not that I'll probably have to change the power steering pump again any time soon, but still. :)
Thank you! Giving you a like and subscribe for next time I have to fix something. :)
Thanks good info. What if the pump just needs an o-ring ?
Very detailed video, thank you!
thx!
Thanks mate!
Great video and talk through, thank you.
ty
Should I flush the system before, or after installing the new pump? My mothers car is the 2004 honda accord 2.4L as well, and some mechanic put a new power steering pump in, and she said it felt great, but then she said after a few weeks the steering was next to impossible, and that the fluid wasn't in the reservoir. Could it be that he didn't flush out all the oldness out first before installing the new one, or do you think it's a rack and pinion steering rack? the car has 195k miles but it drives soo smoothly.
That Hondas engine looks brand new.. hope it’s still running since this was done a couple years ago
Thank you so much !
AWESOME! Thank you!
Nice and clean inside.
Rich Lo thanks!
Toby does human resources and works on cars?! impressive idk why Michael doesnt like him!
If you must replace the high pressure line you need to lift the engine a bit from the rear engine mount since its running through it.
I thought you were replacing the pump for a new one and thus I was a little puzzled when you said that the pump still had fluid in it when you put it back on. Was this for demonstration purposes only and saw you were installing the same pump that you just took out a minute ago? Very clear and didactic video, many thanks.
Yes this was for demonstration. Usually oem pump comes sealed with fluids already inside the pump. If the pump isn’t primed, you will need to prime the pump so it doesn’t run dry.
@@NutzAboutBolts Your answer is super useful, thank you so much.
Is bleeding the power steering system necessary after replacing the pump?
nice vid man
How do you remove the power steering pressure line
Hey I just flushed the system and the power steering is still having issues so now I’m going to replace it. Will I have to flush again after installing the new pump? Thank you for the video...great work
No need to flush again considering the internals of the new pump are "new" and clean.
Where does the orange and the black O ring go? I don't know what's inlet and outlet
Can anyone possibly post a video on how to replace and flush the power steering pump on a 2007 CRV? I can't find a video for this anywhere. Thanks, Michael
The one I got didn’t have the pulley. Does the pulley nut spin off righty tighty or loosy
Hi,
I have 2003 Honda accord and its steering doesnt feel like powered steering. Any solution? Need to rotate a lot.
Does anyone knows if k24 power steering pump is the same as j32a??
wish you guys made one on that upper hose replacement. mine is leaking and there is a special bulletin and recall on the V6 version on leaking hoses but mine is not a V6 so I have to replace it, its leaking bad but it runs from the top of the engine to the bottom.
+David Humphrey maybe when we have more time... haven't done any video's lately. :(
Awesome video! How do you know when you need to change our the Power steering pump?
+Sterling Wong when steering is stiff or foam in the fluids
+NutzAboutBolts thx
Great videos. I need to replace the tensioner and it led me to this video and last comment was about flushing the pump after replacing, which I found the vid about flushing. Is there a quicker easier way to prime the pump without getting into a flush job?
Actually I gonna try just moving the pump without disconnecting the hoses.
@@chuckholland6349 were u able to.move without disconnwctinf?
How do you take the wheel off?
What year is this Accord? I'm watching @:25 my 2007 CRV has this similar cover on the PS pump, with one bolt holding the cover on, but the lower hole is exposed, and there are no threads in it, is that right? Does air or fluid come out? Can't figure out why that other hole is there.
hey quick question, i know there is a o ring connected with high pressure hose for 4 cyl, but is there another o ring connected with low pressure hose that is bolted on to the pump, ive seen couple of v6 hondas and they are replacing the o ring connected with the low pressure hose not high pressure, let me know thanks
I don't think the lower hose has any o-ring because they use the clamp method. I could be wrong, but you should check. The inline 4 cylinder doesn't have any o-ring issues, only the V6 that I've read.
please, please, please do a video on how to change the power steering hose high pressure side for 2003-2007 honda accords...
Did you find out how to do it? I need to change mine and I can't see where it goes from the pump.
Ozzie Crosby zIt goes to the rack & pinion. Do NOT but he cheap Chinese made knockoffs at the local DIY parts stores. They are garbage.
very well explained thank you
+Gigglin bahena thank you!
Just replaced mine thanks to your video again thank you so much.
+Gigglin bahena np! thank you for watching!
Can we find it's repair kit ?
I got power steering fluid all on my belt hoses even on my alternator. I'm changing the pump soon do I need to replace the belt since it has ps fluid
+Javier Romero no, you can use brake clean and spray on the belt and let it dry off. It'll get all the fluids out and dry pretty quickly.
+NutzAboutBolts what about the alternator and the part that's under it can I spray them all
+Javier Romero yes
Is the pulley pressed on
can you show or do a video on the variable timing solenoid on 2003 accord. Thanks
+Gonou Siong its in the back of the engine, do you need me to show you where it is? whats wrong with your vvt?
NutzAboutBolts can you tell me please, I recently replaced my power steering pump which I purchased from eBay for my Honda Accord 2008 VTI - my mechanic also flushed the oil with genuine Honda oil... Now when I drive the steering randomly goes very stiff and hard to turn especially on high rev say when driving up the hill. The O rings are new also. And as usual the seller is blaming the mechanic wrong installation and the mechanic says it's a faulty pump. From what I see the installation looks perfect and no leaks at all. What are your thoughts?
Is the ps pump working properly? Have you tried doing our flush method to see if the pumps pushing fluids out? If the pump isn’t running properly, it can cause the steering to go stiff since there’s no fluids going through the rack and pinion, as if the accessory belt isn’t running.
Do you have a video about bleeding the power steering pump? Anybody that's going to change a power steering pump knows how to take a hose off or remove a mounting bolt.
It seems to me you skipped the most important part of replacing a power steering pump.
My 04 honda steering wheel got stuck the other day it was -54 F, anyone know if the cold was a major factor or probably the reason why? I almost hit an incoming vehicle 😱 I let the car warm up before i took off, but in a mile and a half as I was trying to make a left turn it got stuck
Probably water in the power steering fluid turned to ice and eventually clogged a line. Change/flush the power steering fluid.
How do u bleeed it
can you do a video on how to replace the high pressure power steering hose for this accord? thanks :)
We can try, we have a lot to do's but not enough time lol
Thanks man, appreciate it if you can do it. ;)
I have Accord 2006 4 cylinder. It seems like there is fluid dried up around the power steering pump. It seems like it most likely is/was leaking from the high pressure o ring. Fluid level seems to be right on the "low" line. Do I need to pinch the high pressure hose? Do I need to remove the belt?
Thanks
I would clean up that area, then refill it with ps fluid, and check to see if that area is actively leaking or seeping through. If it is. I would check where its coming from. I've read that the V6 engine has a bad high pressure o-ring that you need to replace. I haven't heard of the 4 cylinder engine having that issue. The only issue I had on my vehicle was a crack underneath the ps reservoir, which was leaking all over the the side onto the body.
thanks
Wouldn’t make sense to change the timing belt (v6) since you are changing the serpentine belt?? Thinking of changing mine
Timing belt Change is around 120k miles, serpentine belt is different, sometimes 90k or could go longer
What is part size for 05 honda ex l4
Will this process work on a 2003 CRV? Since they have the same engine
Evan Mollica yup
You removed and put the same old pump back on? With new install do they come with the serp belt pulley on them? Lots of unanswered questions
I did notice that he installed the same pump too!
For Honda Accord Owner: I've had 2 recalls from Honda deanship, one of the was replacing the entire power steering pump for FREE. So you guys should call and ask if your car have a recalls. I've 2003 Honda Accord Coupe V6 btw.
Thanks for the info, I've read somewhere online as well that the V6 p/s pump having problems with the high pressure o-ring as well. I haven't read anything for the 4 cylinder engine yet... Thanks again!
You're very welcome buddy!
I had to replace the water pump, and we had to take out the power steering pump and hose similar to what you did. When I put it back on, i hear a small grumble. Im sure its air in the system. How do I bleed it out? I dont see a part 2
+Shaji Ali search our power steering pump flush.
Great Video.
I have a 2007 Honda Accord V6. There is a hissing sound coming from this area of the engine, it goes with the rpm of the engine. Could this be the P/S pump?
+jpman19 any check engine light? any vacuum leaks? is the p/s fluid foamy? also I think the V6 engine p/s pump high pressure hose has o-ring gasket problems. I would check and see if there's any leaks as well.
no lights, It sounds like a air is leaking from somewhere, cant really tell where. There is some fluid build up around the pump itself. i also have a rattling sound, maybe a pulley?
+jpman19 should check for damage parts or loose parts. Any driving performance problems?
I see you replied to a comment about finding a leak and that's what I'm dealing with. It doesn't seem a lot but enough that I fill a little once every two weeks. If I want to check the resavore do I drain it and remove the canister?
David Humphrey no, its hard to tell if its coming from the reservoir. What I did when my reservoir broke from the bottom was that I cleaned the area up with brake clean and let it dry, then the next day I monitor it and see if its still leaking. Once I saw the leak, I check where it was coming from. I noticed that the reservoir was wet from the bottom, it wasn't obvious dripping, so I replaced it and it stopped leaking ever since.If there's a place that was leaking, you will notice it once its dry and clean. Just go with that.
thanks
what pump would you recommend to use? autozone has a Duralast for about $125.
I usually go with oem, but if you want to save money, then go with aftermarket.
What's that socket extension you're using? I couldn't get the right distance with the sockets I have.
it was a 3/8 3" and a 1/4 1" extensions.
Right behind the power steering fluid is a part what would that be. My cars is completely removed. Can you let me know what that is.
the washer fluid reservoir or the engine mount?
Thengkiyou
I might as well do my power steering pump and serpentine belt at the same time....tools tools tools!
Do I have to drain the old power steering fluid or no??? after changing pumps
+Nestor vides no, you don't need to, but you do need to flush the system from the p/s pump since there could be air in there.
Bleed it ?
devastaticon - we just demonstrate it, we didn't replace the pump, is there something wrong?
***** If it's not broken, don't fix it :) I have 99k miles and its still working properly.
+NutzAboutBolts honda Accord Tourer power Steering pressure hose / pipe Diesel CTDI 53713-SEF-E01:53713 SEF E01:53713SEFE01 2.2 2204 cc N22A1 N22A1 10 / 2003 - 09 / 2008 5 / 6 Speed Manual / automatic New 1 Year warranty Front wheel Drive / RIGHT HAND DRIVE ONLY
www.excelparts.co.uk/product/472612/honda-accord-tourer-power-steering-pressure-hose-pipe-diesel-ctdi-53713-sef-e01-53713-sef-e01-53713-sef-e01-2-2-2204-cc-n22a1.html
My pump leaks steering wheel fluid rapidly on the area right on top of the 10mm head bolt (the one on top of the low pressure hose) the leak is in the middle of the line that kinda looks like it separates the pump into 2 halfs??? Replace whole pump?
+arlind mehmeti If your engine is a V6, its common that the o-ring there leaks fluid. I would replace the o-ring and see if it still leaks, next would be the hose, since the pump is expensive.
+NutzAboutBolts supercharged 4cyl tsx thnxx gon take it to da shop monday pre sure its just the os
Do I need a new pulley or can I use my old one ? Gotta replace mine soon it's starting to leak from top of pump and the ps is loud
You can reuse the old pulley
the long bolt that took forever for you to remove on my accord broke half of it is stuck. What can I do? the area is to crowded to get a drill. can I just mount the first bolt and leave the other one unmounted? please help.
OhNo Hambino Ya
after installing the new power steering pump, what are the steps of bleeding it?
Rtovisions go to our power steering fluid flush. That’s how you bleed the air out.
Any tips on getting the belt holder off
Just wiggle it back and forth, it should fall off
whats the best way to take off the pump pulley from the pump
you can either use a pulley holder tool or stick a screw driver in the open slot of the pulley and wedge it somewhere on the vehicle to remove the bolt. Some people remove the pump and use a vice and a torque wrench while holding the pulley still.
NutzAboutBolts thanks appreciate it bro.
np!
I bought one but it didn't bring the rotator, any suggestion how to remove the old Rotator to put on the new pump?
You’ll need a pulley holder to remove the old pulley out
hello there, requesting some help, i recently worked on an 2005 Acura TSX 2.4 engine, the engine is exactly the same one as shown in this video. I replaced the power steering pump because it was making too much noise, after doing the job the new pump still makes as much noise as the old one.
i replaced the pump, rings checked for leaks and did not find any leaks. After turning the car on, i turn the steering wheel 50 times to both sides, trying to bleed the air out, but nothing much change. The reservoir over flooded and there was a lot of foam and bubbles.
any suggestions??
please
Probably too late but you need to do a complete flushing of the system to get rid of the bubbles. Might need another person sitting at the wheel and turning it with engine running and you adding the fluid to flush out the old one. Lots of UA-cam video showing you how to flush the ps system.
Sounds like a classic case of a bad O ring