Mercedes SL Heater Blower Control Fix with iCarsoft

I had an issue with my heater blower switch being temperamental, I suspected 3 main issue that it could be and discussed them in order of probable culprits. I then used my iCarsoft to confirm the issues, which also flagged up a hidden fault that I was not aware of!
Multicar iCarsoft version: amzn.to/3r1ZxAk
iCarsoft OBD II Diagnostic Tool EU Pro model 20+cars: amzn.to/3GufJD0
Mercedes only iCarsoft version: amzn.to/3Scjn7N
iCarsoft CR Max pro version: amzn.to/3fcDg02
Disclaimer:
This video is for information and guide purposes only and cannot guarantee against improper use or unauthorised modifications of this information. I assume no liability for damage or injury incurred as a result of any of the information contained in this video. I recommends safe practices when working on vehicles using correct PPE, equipment and processes. Take care and thanks for watching. / @grooveon I really hope my content helped you, 'Super Thanks' is available by clicking the button under the video thanks so much ! ❤️
Alternatively, you can just buy me a ''thankyou'' coffee!: ko-fi.com/groo...

[@xtraceex]

I have a similar setup in my 2010 Jaguar; the little motor device is called an "aspirator" in Jaguarspeak. It's purpose is to draw in ambient air across a thermistor which will sense that ambient temperature. Problem is, it also draws in dust, which will settle across that thermistor , acting as a sort of insulation, which leads to false readings reported to the controller. Simple solution is to use a "Q-Tip" to clean the accumulation from the face of the thermistor. Some Contact ReNu might help if needed.

[@Stallion492]

Great video, can u please do a video on dpf regeneration. Thanks 👍

[@rdrjr4129]

13:00 I have the exact same issue. Blower started working as soon as i removed the panel and didnt stop until i unplugged it. I’m not very mechanically inclined, could you help me with how u found out which connections were bad?

[@GrooveOn]

I just looked at the plug and saw that a connection was chared so I cleaned up. make sure all pins are good and connected

[@asankovlogs]

Man i have 22 code about the AC? I need your help

[@asankovlogs]

I have no heat. Air blowing only to face no legs no dash even if selected where to blow?

[@GrooveOn]

What's the full code, ? Should be letters and 4 numbers

[@asankovlogs]

@@GrooveOn there are 22 of them

[@GrooveOn]

@@asankovlogs oh i see. So what fault can trigger others, what codes do you have

[@GrooveOn]

@@asankovlogs can you list the codes?