4 Easy CNC Projects
Вставка
- Опубліковано 19 чер 2024
- Here are 4 fun and easy CNC projects that you can make at home on your machine. If you'd like to make one (or more) of these designs, you can either replicate these designs yourself, or you can purchase my plans in the link below. I have also included some links to key tools and items used to make these projects. Happy building!
Links to Designs
Smoketop Cocktail Infuser:
eigendesigns.com/listing/1385146237/4-cocktail-smoke-tops-195x-45-x-125-cnc
Large 8" Cast Irong Serving Tray:
eigendesigns.com/listing/1322520737/large-8-cast-iron-platter-cnc-digital#reviews-module
Smart Phone Holder:
eigendesigns.com/listing/1478273685/smart-phone-stand-digital-cnc-carve
Cutting Board Holder:
eigendesigns.com/listing/1476816563/cutting-board-holder-digital-cnc-carve
Website: www.eigendesigns.com
Instagram: eigen_desig...
TikTok: www.tiktok.com/@eigendesigns?...
-------------------------------------------------------------------------------------------
Time Stamps:
0:00 Introduction
0:32 Smoke Top Cocktail Infuser
3:54 Large Cast Iron Skillet Tray
5:48 Smart Phone Holder
8:04 Cutting Board Holder
-------------------------------------------------------------------------------------------
Video Specific Links:
Cast Iron Serving Dish: amzn.to/3VJs7VA
¾” Stainless Steel Screens: amzn.to/3IkWs8l
Butane Torch for Cocktails: amzn.to/3LRSyUB
Bits Used:
Whiteside RU2100 ¼” End Mill Bit: amzn.to/44Efnnc
Whiteside RD 1600 1/8” End Mill Bit: amzn.to/3pjgQzd
Whiteside 1500 90˚Engraving Bit: amzn.to/41VUWjO
Whiteside 1550 60˚ Engraving Bit: amzn.to/3Q8NpJD
Whiteside 1372B Bowl Bit: amzn.to/3WHjCdz
-------------------------------------------------------------------------------------------
Equipment & Tools:
10” Combination Saw Blade: amzn.to/3o0c3i0
10” Rip Blade: amzn.to/2Zw55sF
JessEm Router Table Lift: amzn.to/3ALk2at
Bosch 2.25 HP Router: amzn.to/3Rwre0g
Bosch Offset Wrenches: amzn.to/3z28E8M
Fulton 110V on/off switch: amzn.to/3PorrR4
Craftsman Air Compressor Set: amzn.to/3kz3zhv
Countersink Drill Bits: amzn.to/3BuBE8G
13-Piece Spade Drill Bit Set: amzn.to/2UlBT5g
Titebond III Wood Glue: amzn.to/3BiUyzc
Titebond Original: amzn.to/3iqjBYp
Titebond Dark Wood Glue: amzn.to/3FToYd9
DeWalt Clamps: amzn.to/3BiC5Ti
DeWalt 20v Cordless Drill Set: amzn.to/36Oe9ck
Bessey 18” Parallel Clamps: amzn.to/3hOmdjC
Bora 40” Parallel Clamps: amzn.to/3itiGq6
Bessey Strap Clamps: amzn.to/3hkCJag
Microjig Push Block: amzn.to/3uPK2fT
Festool Equipment:
Festool Kapex Miter Saw: amzn.to/3GkzBZi
Festool OF 1400 Router: amzn.to/3Vp4aBh
Festool Rotex 150 Sander: amzn.to/3DZHdwD
Festool ETS EC 125 Sander: amzn.to/3payIcl
Festool Sandpaper: amzn.to/3nUzev7
Festool Dust Extractor: amzn.to/2Zvi9yB
Festool Domino DF 500: amzn.to/3Gu9DA4
Festool Domino Assorted Tennon Set: amzn.to/3FjPHhP
Festool TS 75 Tracksaw: amzn.to/3JVn4Ma
WoodPecker Equipment:
Woodpeckers Router Table Fence: amzn.to/3Y2PRUy
12” T-Square: amzn.to/3KcEZxY
32” T-Square: amzn.to/3T3aOgw
12” Stainless Steel Square: amzn.to/3SXqGB8
6” Stainless Steel Square: amzn.to/3K6OTB8
Stainless Steel Square Set: amzn.to/3QYR9wp
6” Stainless Steel Delve Square: amzn.to/3QGlznl
Stainless Steel Delve Square Set: amzn.to/3K6F9H2 - Навчання та стиль
“When you are trying to establish dominance” 😂😂😂 I love your jokes throughout the videos! Very clever
Hahahah, sometimes you just have to let the other woodworkers know 😂😂
Team round over ❤ Love the cocktail toppers! So much easier to use vs the glass domes. And way more cost effective! Very creative design!🎉🎉
Round over for me..
I really like all of your designs!
Thanks Rick. It sounds like there are more round over fans out there!
Great job Mark, I really like those cutting board holders.
Thanks NW. They’re a pretty slick solution to putting your items on display.
Now I have to wonder if any of my rival woodworkers are out-peacocking me with your cutting board holder.
Hahaha, no one could ever out-peacock you Logan! 😂😂
Mark, I purchased your cutting board stand digital plan and imported the DXF file into Vcarve Pro. I used profile cut on the outside of the line (with conventional cut) for the tool path using 1/8" downcut bit. When I did that, the half lap cuts that inter-connect the pieces were too narrow. Any suggestion as to why the cut made the slots too small? Thanks for your help and loved all of your plans I purchased so far.
Hey, I don't always get to all of the UA-cam comments so make sure to reach out through Etsy if you're looking for quick support. Two suggestions for you based on what you're saying: (1) I would suggest putting a chamfer on the edges to ensure the pieces can fit together easier. (2) The thickness of the material is supposed to be 1/2" thick so if you're still having trouble you can run the pieces through a drum sander to get down to 0.49" to help things fit. If neither of these fixes your issue, reach out to me through Etsy and we'll get this resolved. Good luck!
Nice as always, Mark! I wonder how hard it would be to embed a qi charger on the phone holders? Also: team chamfer for life!
Hey JP! I have done that in a desk before. Short answer is it IS possible, but you have to bury it
It looks like you are happy with the 1F. Are there any issues that you have had to work through that a new buyer should know about it? Any must do things to keep it working consistently?
Hey Tommy, yeah I have been very happy with my OneFinity. It’s been essentially maintenance-free in the year+ I have been using it. I haven’t encountered any issues with calibration, which is a testament to their ball screw design.
Ha I need a template for cutting broad holders. Any help?
Hi.. I like the design of your CNC. What brand or model is it? Thanks!
Hey Marius, I have a OneFinity CNC. The one you see in this video is their journeyman with a 32” x 32” cuttable area. Since this video I actually bought a larger version they offer called an elite Foreman. You can check out a more current video of mine to see the difference.
Great video as always! I see all your equipment listed in comments but I don’t believe you list your CNC.
Hey Peter! The CNC I use is made by a company called OneFinity. You can check them out at OneFinityCNC.com
How do you like your one finity? I am a woodworker and make cutting boards & charcuterie boards. I do have a small side business and would like to add a CNC and have been looking at the shapeoko 5 and have herd good things about one finity. Any insight would be appreciated. Thanks man. Great video.
Hi, what software do you use for your CNC?
Hey Andrew, I use Fusion360 for most of my work. They offer a free version to hobbyists so you can give it a shot without risk.
Good luck!
Hey what do I do if I ordered something but never got the email for it?
Shoot me a message on Etsy and I can email you the files directly.
Done deal. @@EigenDesigns
How do you like your dust boot?
I like it quite a bit. It doesn’t a pretty good job and the 4” hose moves a lot of air
@@EigenDesigns Did you design the dust boot or did you buy the plans?
@@SYLTHECRU there’s a company called PWNCNC that makes them. I have the v7 dust boot. Here is a link for you to check out:
pwncnc.com/collections/featured-products/products/dust-boot-v7