Saludo desde Cali Colombia. Hoy se celebra en este país el día del padre, y quiero agradecerte por tener la paciencia y dedicación para enseñarnos a todos de manera clara, sencilla y puntual lo maravilloso que es el mundo del CNC. Bendiciones de salud.
Hi Roger, You may have noticed this already on F360, but it seems the fillet tool causes the post processor to have very strange issues, as soon as I switched it out to a chamfer all of my issues were resolved on mach3, once again thanks for this guide you've given me a good headstart to figuring this out! Best of luck! James
Thank you so much for the information and wonderful tutorials over the years! My question for this video is how would you do a finishing pass on this part so you have a uniform cut at the end instead of intermittent rough passes as a finish?
hi Roger, do ou use the free version of fusion 360? because in mine i don't have any option to transfer in g-code Do ou have a link to download your version? Thank's Fred
I can not tell you how useful this tutorial is when your learning fusion 360
Saludo desde Cali Colombia.
Hoy se celebra en este país el día del padre, y quiero agradecerte por tener la paciencia y dedicación para enseñarnos a todos de manera clara, sencilla y puntual lo maravilloso que es el mundo del CNC.
Bendiciones de salud.
Hi Roger,
You may have noticed this already on F360, but it seems the fillet tool causes the post processor to have very strange issues, as soon as I switched it out to a chamfer all of my issues were resolved on mach3, once again thanks for this guide you've given me a good headstart to figuring this out!
Best of luck!
James
Extremely helpful, thank you!
You're welcome!
Thank you so much for the information and wonderful tutorials over the years! My question for this video is how would you do a finishing pass on this part so you have a uniform cut at the end instead of intermittent rough passes as a finish?
Coming soon!
Looking forward to it! Cheers!
Love this guy ♥️😎
how you set tool this side of the parts for stranad cinverted lathe
Do you have Fusion 360 tutorial for cnc turning for beginners…. To start from scratch
hi,great videos as always.are we gonna see the turning part off that piece in mach 3
Possibly!
hi Roger, do ou use the free version of fusion 360? because in mine i don't have any option to transfer in g-code
Do ou have a link to download your version?
Thank's
Fred
I'd really appreciate it if you could do the mach 3 /turning steps for this so we could go through it!
I try all this and the part mach3 try to make it Double the size all setup was the same no idea what went wrong. Lol.
nice job on video.
Hi, you need (diameter mode) in Mach3
nice tutorial..
Many thanks Fred.
A happy little chamfer........ Bob Ross?!